Skip to content

Latest commit

 

History

History
110 lines (77 loc) · 9.15 KB

README.md

File metadata and controls

110 lines (77 loc) · 9.15 KB

tuyaTRIGGER

A real device WiFI, having a big unused numerical parameter, say a 'counter', accessible via MQTT by both Tuya and node-red, is all the required hardware to implement a robust bilateral event communication (TRIGGER).

This 'counter' is used as a dual port HW register: a sender (tuya-cloud/node-red) set the counter to some XX value, the receiver gets the XX value, acts accordingly, and resets the counter to 0 (ACK action): node-red read/write actions are performed by the tuyaTRIGGER flow, Tuya-cloud actions are performed by ad hoc automations, one for TRIGGER.

  • node-red => tuya (REDTRG): node-red write a predefined value in the 'counter' (say 1010) and that fires a specific Tuya automation: first the automation must reset the 'counter' to 0, then it can do anything. Tuya automation, named trigger1010: If "counter:1010" do "counter:0" and "any-action..."

  • tuya => node-red (TUYATRG): A tuya scene (user action) or automation (event) sets a predefined value on the 'counter' (e.g. 2030), and when node-red knows that, it must first reset the "counter' to 0, then it can do anything. Tuya automation, say trigger2030: If "any-event" do "counter:2030"

This TRIGGER mechanism, implemented in core_TRIGGER, allow a better tuya <=> node-red integration:

  • node-red can set/get status for all devices and data point not found by node-red-contrib-tuya-smart-device.
  • node-red can fire automation on tuya-cloud
  • tuya scene can control node-red flows, so a node-red user can employ smartlife as remote control (from anywhere).
  • tuya automations can fire flows in node-red, implementing this way any advanced strategy not allowed by Tuya.
  • user can fire node-red flows with vocal control (e.g. Googlehome)

implementation

This technique can be used with any device, named in the flow and in alldevices "tuya_bridge", that meet some conditions:

  • A large numerical dp e.g. countdown present in some switch devices.
  • Idipendence: setting the countdown to 0 does not toggle the switch.
  • In case of countdown, the value must be PUSHed with a fixed frequence.

  1. I choose first the Tuya Switch MS-104 (USD 8) because its countdown (dp = 102) is with a large range [0-86400s, i.e. 24H] and still the device can be used as a WiFi switch, because only the countdown is used by tuyaTRIGGER, plus it is small and cheap.

    The unique problem with this switch is the lack of a battery backup.

  2. I also tested another device, a Tuya wifi switch TYWR 7-32 (USD 10) with a micro USB input, so it can be used with a power bank to get a UPS power supply. It has all required features: countdown (dp = 7) with a large range [0-86400s, i.e. 24H], independence, 30s PUSH period, so it is better than Switch MS-104.

    As against it is bigger and without case, and needs an external UPS power supply.

    I changed tuya_bridge to TYWR 7-32 at ver. 2.0: I put it in a box and connected it to the Android server USB, because this server is with a UPS power supply.

  3. CUSTOMIZATION: you can use other devices to implement 'tuya-bridge'. See updated information on 'Global TRIGGER config' node and 'triggerMAP (readme)' node (since 2.2.0).

note

  • TuyaTRIGGER is based on simple automations in tuya-cloud, more stable over the time and reliable than the protocols used with the devices, which can change with each new version.

  • analog values can't be sent from Tuya this way, because tuya-cloud does not allow the use of calculated values. But comparations are allowed: e.g. send trigger if 'temperature < 16'. (Available: <; =; >). We can 'mirror' BOOLEAN dp (2 automations) ENUM dp: [0|1|2] (3 automations) or also INT, but converted to ENUM when required: {<16|16-20|21-25|26-30|31-35|36-40|>40} but many automations are required (7 for this example).

  • using a countdown as a trigger, as all switches does, requires REDTRG with numbers greater (e.g. 5000+) than TUYATRG (e.g. 1100..4999]): so, if node-red is down, a Tuya TRIGGER action not caught can't trigger a REDTRG command.

  • If the counter used is a time counter (countdown in the case of switches) it is necessary to choose trigger values at least separated by enough time, to allow the ACK action.

  • for fallback, MUST exist a Tuya Automation fired when the countdown is less than any trigger value (e.g. 1050), to reset the countdown to 0 without ACK: so the countdown never interferes with the logic of the switch. Required Tuya automation: if "tuya_bridge".countdown = 1050, then "tuya_bridge".countdown:0

  • The actual implementation does not verify the ACKs presence and timing, and not uses any handshake strategy, so it is theoretically possible to have some interferences. For deatails on the implementation see 'core_TRIGGER."triggerMAP (readme)"' node.

minimal implementation for node-red users

This tuyaTrigger downsizing enables all node-red user (not only passionate IOT users, who use tuyaDEAMON) to add remote control and voice control to their projects in a simple way. only a flow with 3 nodes! It can be download here.

MQTT tuya_bridge tests (requres core_MQTT)

Some fast tests to do in MQTT explorer (copy/paste, maybe edit value), HW dependent, see switch-1CH:

property op. MQTT topic value notes
SCHEMA GET tuyaDAEMON/DEVPC/tuya_bridge/command <empty>
SCHEMA (device) GET tuyaDAEMON/DEVPC/HAL@home/command/_doSCHEMA "tuya_bridge" 5
SCHEMA (tuyastatus) GET tuyaDAEMON/DEVPC/HAL@home/command/_tuyastatus {"device":"tuya_bridge"} 6
relay SET tuyaDAEMON/DEVPC/tuya_bridge/command/relay ON/OFF
restart status SET tuyaDAEMON/DEVPC/tuya_bridge/command/restart status off/on/menory
backlight SET tuyaDAEMON/DEVPC/tuya_bridge/command/backlight true/false
circulate SET tuyaDAEMON/DEVPC/tuya_bridge/command/circulate [{"active": "true"/"false", "day":"SMTWTF-", "start": "HH:MM", "end": "HH:MM", "on": "HH:MM", "off": "HH:MM"},..]/[] 1
random SET tuyaDAEMON/DEVPC/tuya_bridge/command/inching [{"active": "true"/"false", "day":"DLMMGVS", "start": "HH:MM", "end": "HH:MM"},..]/[] 1
inching SET tuyaDAEMON/DEVPC/tuya_bridge/command/inching { "inching": "true"/"false" "delay": 0..3660}
light mode SET tuyaDAEMON/DEVPC/tuya_bridge/command/light mode pos/none/relay
tigger (reserved) not accassible directly 0..86500 2
TRIGGER SET tuyaDAEMON/DEVPC/HAL@home/command/_doTrigger 5000 3
TRIGGER SET tuyaDAEMON/DEVPC/HAL@home/command/_doTrigger 5020 3
TRIGGER SET tuyaDAEMON/DEVPC/HAL@home/command/_toFastIN {"device":"tuya_bridge", "property":"trigger (reserved)", "value" : 5000} 4
TRIGGER SET tuyaDAEMON/DEVPC/HAL@home/command/_toFastIN {"device":"tuya_bridge", "property":"trigger (reserved)", "value" : 5020} 4

notes

  1. The "day" is a string of 7 chars (a week), starting from 'Sunday': '-' minds 'skip', any char minds 'run'
  2. Reseved to TRIGGERs, not accessible via GET/SET (see global.alldevices definition).
  3. TRIGGER SET using 'system'.\_doTrigger: the TRIGGER is sent to tuya-cloud, where it fires an existing automation 'If "tuya_bridge"Countdown 1 : equals 5000 (or 5020)...'
  4. TRIGGER SET using 'system'.\_toFastIN (no checks): the TRIGGER is sent to tuya-cloud, where it fires an existing automation 'If "tuya_bridge"Countdown 1 : equals 5000 (or 5020)...'
  5. The standard SCHEMA is usable only on devices that implement it. the system.doSCHEMA(device)_ uses the result of GETs from all readable dps of the device, so it is always usable.
  6. The SCHEMA (tuyastatus) reads data from global.tuyastatus, so it gets also PUSH only dps, or pseudoDP (like '_connected') and can be used with any device.

Versions

tuyaTRIGGER version 2.2.2 (10/05/2023)

  • Maintenance release (in download).

tuyaTRIGGER version 2.2.0 (10/04/2022)

  • tuyaDAEMON ver 2.2.0

tuyaTRIGGER version 2.0 (13/05/2021)

  • included in tuyaDAEMON ver 2.0 (tuyaDAEMOM-full.2.0.json)

tuyaTRIGGER version 1.1 (19/01/2021)

  • tuyaDAEMON ver 1.1

tuyaTRIGGER version 1.0 (15/01/2021)

  • tuyaDAEMON ver 1.0

Initial version