Skip to content

Latest commit

 

History

History
27 lines (23 loc) · 1022 Bytes

README.md

File metadata and controls

27 lines (23 loc) · 1022 Bytes

Vallox ESPHome component

Vallox SE ventilation control software for ESPHome (and thus Home Assistant)

Hardware

See guide at https://www.creatingsmarthome.com/?p=73

Should work with any device using the VALLOX DIGIT bus protocol over RS485 including:

  • Vallox 096 SE
  • Vallox 110 SE
  • Vallox 121 SE (version without front heating module)
  • Vallox 121 SE (version with front heating)
  • Vallox 150 SE
  • Vallox 270 SE
  • Vallox Digit SE
  • Vallox Digit SE 2
  • Vallox ValloPlus 350 SE
  • Vallox ValloPlus SE 500

Home Assistant components

Contained entities:

  • climate: Climate entity with Off/Fan Only/Heating operation mode, fan speed control, target temperature control
  • All additional sensors, number, button, etc. are optional and can be included as needed.
  • If you need a specific feature that is not included let me know, adding it should be straightforward.

Configuration

Copy content of example_vallox.yaml to your esphome configuration for your device. Adjust UART pins (RX/TX) as used with your device.