Copyright 2018 Moddable Tech, Inc.
Revised: October 23, 2018
| Part | LS027B7DH01A |
| Size | 2.7", 240 x 400 |
| Type | Sharp Memory TFT-LCD, Monochrome |
| Interface | SPI |
| Drivers | video ls013b4dn04, no touch |
| Availability | Sharp Memory 2,7" LCD on Digi-Key |
| Description | The Sharp Memory display is a blend of an eInk (e-paper) display and an LCD. It has the very-low power draw of eInk and fast-refresh rates of an LCD. Moddable uses the [Kuzyatech Sharp Memory display breakout board] (https://www.tindie.com/products/kuzyatech/sharp-memory-lcd-breakout-a2/) to interface with the display FFC and boost the ESP8266 power to the 5V needed to drive the display. |
The balls example is good for testing this display. To run a debug build, use the following build command:
cd $MODDABLE/examples/piu/balls
mcconfig -d -m -p esp/sharp_memory
| Sharp Memory Display | ESP8266 | ESP8266 Devboard label |
|---|---|---|
| VIN | 3.3V | |
| GND | GND | |
| EXTMODE | ||
| DISP | 3.3V | |
| EXTCOMM | ||
| SCS | GPIO 4 | (D2) |
| SI | GPIO 13 | (D7) |
| SCK | GPIO 14 | (D5) |
