HACIP2.mib

--------------------------------------------------------------------------------
--
-- System Manager SNMP MIB (HITACHIIPMIP2.MIB)
--
-- All Rights Reserved, Copyright (C) 2008, Hitachi.Ltd.
--
-- Version 04-00-00-00  DATE 2008.04.22
--
--------------------------------------------------------------------------------

SystemManagerHITACHIIPMI-MIB DEFINITIONS ::= BEGIN

  IMPORTS
    enterprises
      FROM RFC1155-SMI
    OBJECT-TYPE
      FROM RFC-1212
    DisplayString
      FROM RFC-1213;

--------------------------------------------------------------------------------

  hitachi         OBJECT IDENTIFIER  ::= { enterprises   116 }

--------------------------------------------------------------------------------

  systemExMib         OBJECT IDENTIFIER  ::= { hitachi             5 }
  systemManagerMibs   OBJECT IDENTIFIER  ::= { systemExMib        21 }
  information         OBJECT IDENTIFIER  ::= { systemManagerMibs   1 }

--------------------------------------------------------------------------------
-- System Manager
-- information
--------------------------------------------------------------------------------

  HitachiHardwareInformations OBJECT IDENTIFIER  ::= { information     4 }

--------------------------------------------------------------------------------
  temperatureProbeInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 2 }

  temperatureProbeTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF TemperatureProbe
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { temperatureProbeInformation 1 }

  temperatureProbeEntry OBJECT-TYPE
    SYNTAX  TemperatureProbe
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { temperatureProbeTable 1 }

  TemperatureProbe ::= SEQUENCE
  {
    index           INTEGER,
    currentReading  INTEGER,
    status          INTEGER,
    sensorName      DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Index into this temperature probe table."
  ::= { temperatureProbeEntry 1 }

  currentReading OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The present temperature reading of this temperature probe in 1/10th
       degrees C. 0x8000000 denotes 'unknown'."
  ::= { temperatureProbeEntry 2 }

  status OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Defines the status of the temperature monitored by this temperature
       probe.0x00 = Unknown0x01 = OK0x02 = Low(Non-critical)0x03 = High
       (Non-critical)0x04 = Low(Critical)0x05 = High(Critical)0x06 = Low
       (Non-recoverable)0x07 = High(Non-recoverable)0x08 = Other errors. It is
       indicated by a integer value as follows (hexadecimal).
         0x00 = Unknown
         0x01 = OK
         0x02 = Low(Non-critical)
         0x03 = High(Non-critical)
         0x04 = Low(Critical)
         0x05 = High(Critical)
         0x06 = Low(Non-recoverable)
         0x07 = High(Non-recoverable)
         0x08 = Other errors"
  ::= { temperatureProbeEntry 3 }

  sensorName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Sensor name. It is expressed in the form of string(ASCII Code)."
  ::= { temperatureProbeEntry 4 }


--------------------------------------------------------------------------------
  fanInformationInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 3 }

  fanInformationTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF FanInformation
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { fanInformationInformation 1 }

  fanInformationEntry OBJECT-TYPE
    SYNTAX  FanInformation
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { fanInformationTable 1 }

  FanInformation ::= SEQUENCE
  {
    index           INTEGER,
    currentReading  INTEGER,
    status          INTEGER,
    sensorName      DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Index into this FAN information table."
  ::= { fanInformationEntry 1 }

  currentReading OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The current number of rotation. 0x80000000 denotes 'unknown'."
  ::= { fanInformationEntry 2 }

  status OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Defines the status of the FAN 0x00 = Unknown0x01 = OK0x02 = Low
       (Non-critical)0x03 = High(Non-critical)0x04 = Low(Critical)0x05 = High
       (Critical)0x06 = Low(Non-recoverable)0x07 = High(Non-recoverable)0x08 =
       Other errors. It is indicated by a integer value as follows 
       (hexadecimal).
         0x00 = Unknown
         0x01 = OK
         0x02 = Low(Non-critical)
         0x03 = High(Non-critical)
         0x04 = Low(Critical)
         0x05 = High(Critical)
         0x06 = Low(Non-recoverable)
         0x07 = High(Non-recoverable)
         0x08 = Other errors"
  ::= { fanInformationEntry 3 }

  sensorName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Sensor name. It is expressed in the form of string(ASCII Code)."
  ::= { fanInformationEntry 4 }


--------------------------------------------------------------------------------
  voltageInformationInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 4 }

  voltageInformationTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VoltageInformation
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { voltageInformationInformation 1 }

  voltageInformationEntry OBJECT-TYPE
    SYNTAX  VoltageInformation
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { voltageInformationTable 1 }

  VoltageInformation ::= SEQUENCE
  {
    index           INTEGER,
    currentReading  INTEGER,
    status          INTEGER,
    sensorName      DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Index into this voltage information table."
  ::= { voltageInformationEntry 1 }

  currentReading OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The current voltage. 0x80000000 denotes 'unknown'."
  ::= { voltageInformationEntry 2 }

  status OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Defines the status of the voltage 0x00 = Unknown0x01 = OK0x02 = Low
       (Non-critical)0x03 = High(Non-critical)0x04 = Low(Critical)0x05 = High
       (Critical)0x06 = Low(Non-recoverable)0x07 = High(Non-recoverable)0x08 =
       Other errors. It is indicated by a integer value as follows 
       (hexadecimal).
         0x00 = Unknown
         0x01 = OK
         0x02 = Low(Non-critical)
         0x03 = High(Non-critical)
         0x04 = Low(Critical)
         0x05 = High(Critical)
         0x06 = Low(Non-recoverable)
         0x07 = High(Non-recoverable)
         0x08 = Other errors"
  ::= { voltageInformationEntry 3 }

  sensorName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..64))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Sensor name. It is expressed in the form of string(ASCII Code)."
  ::= { voltageInformationEntry 4 }


--------------------------------------------------------------------------------
  powerSupplyUnitInfoInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 5 }

  powerSupplyUnitInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF PowerSupplyUnitInfo
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { powerSupplyUnitInfoInformation 1 }

  powerSupplyUnitInfoEntry OBJECT-TYPE
    SYNTAX  PowerSupplyUnitInfo
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { powerSupplyUnitInfoTable 1 }

  PowerSupplyUnitInfo ::= SEQUENCE
  {
    index       INTEGER,
    status      INTEGER,
    sensorName  DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The index number of the power supply."
  ::= { powerSupplyUnitInfoEntry 1 }

  status OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Power supply unit status. It is indicated by a integer value as follows 
       (hexadecimal).
         0x00 = Unknown
         0x01 = attached(OK)
         0x02 = attached(error)
         0x03 = not attached"
  ::= { powerSupplyUnitInfoEntry 2 }

  sensorName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Sensor name. It is expressed in the form of string(ASCII Code)."
  ::= { powerSupplyUnitInfoEntry 3 }


--------------------------------------------------------------------------------
  cpuStatusInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 6 }

  cpuStatusTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF CpuStatus
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { cpuStatusInformation 1 }

  cpuStatusEntry OBJECT-TYPE
    SYNTAX  CpuStatus
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { cpuStatusTable 1 }

  CpuStatus ::= SEQUENCE
  {
    index       INTEGER,
    status      INTEGER,
    sensorName  DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The index number of the CPU."
  ::= { cpuStatusEntry 1 }

  status OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "CPU status. It is indicated by a integer value as follows (hexadecimal).
         0x00 = Unknown
         0x01 = attached(OK)
         0x02 = attached(error)
         0x03 = attached(disabled)
         0x04 = not attached"
  ::= { cpuStatusEntry 2 }

  sensorName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Sensor name. It is expressed in the form of string(ASCII Code)."
  ::= { cpuStatusEntry 3 }


--------------------------------------------------------------------------------
  maintenanceInformationInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 7 }

  maintenanceInformationTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF MaintenanceInformation
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { maintenanceInformationInformation 1 }

  maintenanceInformationEntry OBJECT-TYPE
    SYNTAX  MaintenanceInformation
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { maintenanceInformationTable 1 }

  MaintenanceInformation ::= SEQUENCE
  {
    index           INTEGER,
    stand-ByState1  INTEGER,
    mainState1      INTEGER,
    erasedDate1     DisplayString,
    stand-ByState2  INTEGER,
    mainState2      INTEGER,
    erasedDate2     DisplayString,
    stand-ByState3  INTEGER,
    mainState3      INTEGER,
    erasedDate3     DisplayString,
    ponc            INTEGER,
    poffc           INTEGER,
    acpic           INTEGER,
    erasedDate4     DisplayString,
    otherData       INTEGER
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Index into this maintenance information table."
  ::= { maintenanceInformationEntry 1 }

  stand-ByState1 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Manufacturer : Accumulated time(sec.) of Stand-by state."
  ::= { maintenanceInformationEntry 2 }

  mainState1 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Manufacturer : Accumulated time(sec.) of Main state."
  ::= { maintenanceInformationEntry 3 }

  erasedDate1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Manufacturer : Erased date. It is expressed in the form of string
       (ASCII Code)."
  ::= { maintenanceInformationEntry 4 }

  stand-ByState2 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(1) : Accumulated time(sec.) of Stand-by state."
  ::= { maintenanceInformationEntry 5 }

  mainState2 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(1) : Accumulated time(sec.) of Main state."
  ::= { maintenanceInformationEntry 6 }

  erasedDate2 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(1) : Erased date. It is expressed in the form of string
       (ASCII Code)."
  ::= { maintenanceInformationEntry 7 }

  stand-ByState3 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(2) : Accumulated time(sec.) of Stand-by state."
  ::= { maintenanceInformationEntry 8 }

  mainState3 OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(2) : Accumulated time(sec.) of Main state."
  ::= { maintenanceInformationEntry 9 }

  erasedDate3 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance(2) : Erased date. It is expressed in the form of string
       (ASCII Code)."
  ::= { maintenanceInformationEntry 10 }

  ponc OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Number of power on counts."
  ::= { maintenanceInformationEntry 11 }

  poffc OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Number of power off counts."
  ::= { maintenanceInformationEntry 12 }

  acpic OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Number of AC plug-in counts."
  ::= { maintenanceInformationEntry 13 }

  erasedDate4 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Maintenance Information : Erased date. It is expressed in the form of
       string(ASCII Code)."
  ::= { maintenanceInformationEntry 14 }

  otherData OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Reserved data."
  ::= { maintenanceInformationEntry 15 }


--------------------------------------------------------------------------------
  systemBoardInformationInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 8 }

  systemBoardInformationTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF SystemBoardInformation
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { systemBoardInformationInformation 1 }

  systemBoardInformationEntry OBJECT-TYPE
    SYNTAX  SystemBoardInformation
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { systemBoardInformationTable 1 }

  SystemBoardInformation ::= SEQUENCE
  {
    index     INTEGER,
    cpuName   DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The index number of the CPU Name."
  ::= { systemBoardInformationEntry 1 }

  cpuName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "CPU Name from OEM CPU IDStrings Command. It is expressed in the form of
       string(ASCII Code)."
  ::= { systemBoardInformationEntry 2 }


--------------------------------------------------------------------------------
  selInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 253 }

  selTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF Sel
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { selInformation 1 }

  selEntry OBJECT-TYPE
    SYNTAX  Sel
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { index }
  ::= { selTable 1 }

  Sel ::= SEQUENCE
  {
    index                 INTEGER,
    triggerSensorNumber   INTEGER,
    recordType            INTEGER,
    timestamp             DisplayString,
    recordData            DisplayString,
    eventDescription      DisplayString
  }

  index OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Index into SEL Table."
  ::= { selEntry 1 }

  triggerSensorNumber OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The Sensor Number that triggers this event."
  ::= { selEntry 2 }

  recordType OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "02h = system event recordC0h-DFh = OEM timestampedE0h-FFh = OEM
       non-timestamped."
  ::= { selEntry 3 }

  timestamp OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Time when event was logged. It is expressed in the form of string
       (ASCII Code)."
  ::= { selEntry 4 }

  recordData OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Raw data bytes. It is expressed in the form of string(ASCII Code)."
  ::= { selEntry 5 }

  eventDescription OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "The Description of Event. It is expressed in the form of string
       (ASCII Code)."
  ::= { selEntry 6 }


--------------------------------------------------------------------------------
  eventGenerationInformation OBJECT IDENTIFIER ::= { HitachiHardwareInformations 254 }

  eventGenerationTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF EventGeneration
    ACCESS  not-accessible
    STATUS  mandatory
  ::= { eventGenerationInformation 1 }

  eventGenerationEntry OBJECT-TYPE
    SYNTAX  EventGeneration
    ACCESS  not-accessible
    STATUS  mandatory
    INDEX   { eventType }
  ::= { eventGenerationTable 1 }

  EventGeneration ::= SEQUENCE
  {
    eventType       INTEGER,
    eventLevel      INTEGER,
    eventMessage    DisplayString,
    selRecordData   DisplayString
  }

  eventType OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "This value is the event type."
  ::= { eventGenerationEntry 1 }

  eventLevel OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "This value is the event level. It is indicated by a integer value as
       follows (hexadecimal).
         0x01 = Monitor
         0x02 = Information
         0x04 = OK
         0x08 = Non-Critical
         0x0A = Critical
         0x0C = Non-Recoverable"
  ::= { eventGenerationEntry 2 }

  eventMessage OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Event Message. It is expressed in the form of string(ASCII Code)."
  ::= { eventGenerationEntry 3 }

  selRecordData OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..255))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
      "Raw data bytes. It is expressed in the form of string(ASCII Code)."
  ::= { eventGenerationEntry 4 }


--------------------------------------------------------------------------------

END

--------------------------------------------------------------------------------