Compiling on Raspberry Pi 64 bit

[00RedD00]

I just flashed by emporia, not installed yet, and like others I wasted a lot of time because the pi would not compile.
After of lot of trials, I got it to compile simply by changing "platform_version: recommended" to "platform_version: 5.3.0".
Can someone that has the vue installed try to compile with a pi and check if everything works?
I so adding this at the end of the doc under the "I'm using a 64-bit Pi & can't compile!" section would save others a lot of time.

[flaviut]

I've added a link to this discussion. Thanks for the feedback!

[00RedD00]

I realise I was not super accurate in my description, so in case, this is the actual config that compiles for me:
esp32:
board: esp32dev
framework:
type: esp-idf
platform_version: 5.3.0
sdkconfig_options:
CONFIG_COMPILER_OPTIMIZATION_SIZE: y

No idea if the 2 last lines do anything

[excalbian]

Just wanted to report that I was able to compile successfully on a Pi-4 64-bit (within the esphome add-on of my HomeAssistant instance) without changing the platform version. Perhaps platformio has added support for 64-bit ARM (Raspberry Pi) in a more recent release?

Linking /data/vue-alpha/.pioenvs/vue-alpha/firmware.elf
RAM:   [=         ]   9.3% (used 30440 bytes from 327680 bytes)
Flash: [=====     ]  46.3% (used 848833 bytes from 1835008 bytes)
Building /data/vue-alpha/.pioenvs/vue-alpha/firmware.bin
Creating esp32 image...
Successfully created esp32 image.
esp32_create_combined_bin(["/data/vue-alpha/.pioenvs/vue-alpha/firmware.bin"], ["/data/vue-alpha/.pioenvs/vue-alpha/firmware.elf"])
Wrote 0xe0a30 bytes to file /data/vue-alpha/.pioenvs/vue-alpha/firmware-factory.bin, ready to flash to offset 0x0
======================== [SUCCESS] Took 900.06 seconds ========================
INFO Successfully compiled program.

There was one warning, but doesn't seem to have caused any issues (I'm not sure, may also show up on other environments):

ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
esphome 2023.6.2 requires pyparsing>=3.0, but you have pyparsing 2.3.1 which is incompatible.

My versions:

• Home Assistant 2023.6.3
• Supervisor 2023.06.2
• Operating System 10.3
• Raspberry Pi 4 / rpi 4-64
• Esphome 2023.6.2

I'm using a templated version of the config from the readme, here are the esphome and esp32 sections:

esphome:
  name: ${devicename}
  friendly_name: ${devicename_upper}

esp32:
  board: esp32dev
  framework:
    type: esp-idf
    version: recommended