Sep 2024 Binaries (rev 1)

[clevelandmusicco]

Updated example effects for the stereo version of the Hothouse. If you bought your Hothouse kit or pedal in the month of Sep 2024 or later, you probably have a stereo version. Look on the right edge of the main PCB for "Stereo" to confirm.

Use the Daisy Web Programmer to flash any of these binaries to your Hothouse. If it's the first time you've flashed one of these examples, you'll have to press the BOOT and RESET buttons as explained here.

Important

NEW! After you flash any of these examples, you can reset the Daisy Seed into bootloader mode by HOLDING DOWN THE LEFT FOOT SWITCH FOR 2 SECONDS. The LEDs will alternately flash 3 times, and then the Daisy Seed will be ready for programming another example.

---

This discussion was created from the release Sep 2024 Binaries (rev 1).