Needs to be fully charged to work with all computers
Needs to be flashed via OTA. Example: Startup Paddelec as Access Point, start paddle and connect on PC. IPs should be:
- 192.168.4.1: Paddelec
- 192.168.4.2: Paddle
- 192.168.4.3: PC
A charging adapter is needed to charge the paddle
Use control_usart2. Need to hold down power button during flashing
Need additional Serial adapter, hold boot0 button during start to enter bootloader.
Use control_usart3_ADC.
Just make sure power is not connected during flashing