config.cmake

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.

#--------------------------------------------------------------------
#  Template custom cmake configuration for compiling
#
#  This file is used to override the build options in build.
#  If you want to change the configuration, please use the following
#  steps. Assume you are on the root directory. First copy the this
#  file so that any local changes will be ignored by git
#
#  $ mkdir build
#  $ cp cmake/config.cmake build
#
#  Next modify the according entries, and then compile by
#
#  $ cd build
#  $ cmake ..
#
#  Then build in parallel with 8 threads
#
#  $ make -j8
#--------------------------------------------------------------------

#---------------------------------------------
# Backend runtimes.
#---------------------------------------------

# Whether enable CUDA during compile,
#
# Possible values:
# - ON: enable CUDA with cmake's auto search
# - OFF: disable CUDA
# - /path/to/cuda: use specific path to cuda toolkit
set(USE_CUDA OFF)

# Whether enable ROCM runtime
#
# Possible values:
# - ON: enable ROCM with cmake's auto search
# - OFF: disable ROCM
# - /path/to/rocm: use specific path to rocm
set(USE_ROCM OFF)

# Whether enable SDAccel runtime
set(USE_SDACCEL OFF)

# Whether enable Intel FPGA SDK for OpenCL (AOCL) runtime
set(USE_AOCL OFF)

# Whether enable OpenCL runtime
#
# Possible values:
# - ON: enable OpenCL with OpenCL wrapper to remove dependency during build
#       time and trigger dynamic search and loading of OpenCL in runtime
# - OFF: disable OpenCL
# - /path/to/opencl-sdk: use specific path to opencl-sdk
set(USE_OPENCL OFF)

# Wheather to allow OPENCL cl_mem access to host
# cl_mem will be allocated with CL_MEM_ALLOC_HOST_PTR
# OpenCLWorkspace->GetHostPtr API returns the host accessible pointer
set(USE_OPENCL_ENABLE_HOST_PTR OFF)

# Whether enable Metal runtime
set(USE_METAL OFF)

# Whether enable Vulkan runtime
#
# Possible values:
# - ON: enable Vulkan with cmake's auto search
# - OFF: disable vulkan
# - /path/to/vulkan-sdk: use specific path to vulkan-sdk
set(USE_VULKAN OFF)

# Whether to use spirv-tools.and SPIRV-Headers from Khronos github or gitlab.
#
# Possible values:
# - OFF: not to use
# - /path/to/install: path to your khronis spirv-tools and SPIRV-Headers installation directory
#
set(USE_KHRONOS_SPIRV OFF)

# whether enable SPIRV_KHR_DOT_PRODUCT
set(USE_SPIRV_KHR_INTEGER_DOT_PRODUCT OFF)

# Whether enable OpenGL runtime
set(USE_OPENGL OFF)

# Whether enable MicroTVM runtime
set(USE_MICRO OFF)

# Whether enable RPC runtime
set(USE_RPC ON)

# Whether to build the C++ RPC server binary
set(USE_CPP_RPC OFF)

# Whether to build the iOS RPC server application
set(USE_IOS_RPC OFF)

# Whether embed stackvm into the runtime
set(USE_STACKVM_RUNTIME OFF)

# Whether enable tiny embedded graph executor.
set(USE_GRAPH_EXECUTOR ON)

# Whether enable tiny graph executor with CUDA Graph
set(USE_GRAPH_EXECUTOR_CUDA_GRAPH OFF)

# Whether enable pipeline executor.
set(USE_PIPELINE_EXECUTOR OFF)

# Whether to enable the profiler for the graph executor and vm
set(USE_PROFILER ON)

# Whether enable microTVM standalone runtime
set(USE_MICRO_STANDALONE_RUNTIME OFF)

# Whether build with LLVM support
# Requires LLVM version >= 4.0
#
# Possible values:
# - ON: enable llvm with cmake's find search
# - OFF: disable llvm, note this will disable CPU codegen
#        which is needed for most cases
# - /path/to/llvm-config: enable specific LLVM when multiple llvm-dev is available.
set(USE_LLVM OFF)

#---------------------------------------------
# Contrib libraries
#---------------------------------------------
# Whether to build with BYODT software emulated posit custom datatype
#
# Possible values:
# - ON: enable BYODT posit, requires setting UNIVERSAL_PATH
# - OFF: disable BYODT posit
#
# set(UNIVERSAL_PATH /path/to/stillwater-universal) for ON
set(USE_BYODT_POSIT OFF)

# Whether use BLAS, choices: openblas, atlas, apple
set(USE_BLAS none)

# Whether to use MKL
# Possible values:
# - ON: Enable MKL
# - /path/to/mkl: mkl root path
# - OFF: Disable MKL
# set(USE_MKL /opt/intel/mkl) for UNIX
# set(USE_MKL ../IntelSWTools/compilers_and_libraries_2018/windows/mkl) for WIN32
# set(USE_MKL <path to venv or site-packages directory>) if using `pip install mkl`
set(USE_MKL OFF)

# Whether use DNNL library, aka Intel OneDNN: https://oneapi-src.github.io/oneDNN
#
# Now matmul/dense/conv2d supported by -libs=dnnl,
# and more OP patterns supported in DNNL codegen(json runtime)
#
# choices:
# - ON: Enable DNNL in BYOC and -libs=dnnl, by default using json runtime in DNNL codegen
# - JSON: same as above.
# - C_SRC: use c source runtime in DNNL codegen
# - path/to/oneDNN：oneDNN root path
# - OFF: Disable DNNL
set(USE_DNNL OFF)

# Whether use OpenMP thread pool, choices: gnu, intel
# Note: "gnu" uses gomp library, "intel" uses iomp5 library
set(USE_OPENMP none)

# Whether use contrib.random in runtime
set(USE_RANDOM ON)

# Whether use NNPack
set(USE_NNPACK OFF)

# Possible values:
# - ON: enable tflite with cmake's find search
# - OFF: disable tflite
# - /path/to/libtensorflow-lite.a: use specific path to tensorflow lite library
set(USE_TFLITE OFF)

# /path/to/tensorflow: tensorflow root path when use tflite library
set(USE_TENSORFLOW_PATH none)

# Required for full builds with TFLite. Not needed for runtime with TFLite.
# /path/to/flatbuffers: flatbuffers root path when using tflite library
set(USE_FLATBUFFERS_PATH none)

# Possible values:
# - OFF: disable tflite support for edgetpu
# - /path/to/edgetpu: use specific path to edgetpu library
set(USE_EDGETPU OFF)

# Possible values:
# - ON: enable cuDNN with cmake's auto search in CUDA directory
# - OFF: disable cuDNN
# - /path/to/cudnn: use specific path to cuDNN path
set(USE_CUDNN OFF)

# Whether use cuBLAS
set(USE_CUBLAS OFF)

# Whether use MIOpen
set(USE_MIOPEN OFF)

# Whether use MPS
set(USE_MPS OFF)

# Whether use rocBlas
set(USE_ROCBLAS OFF)

# Whether use contrib sort
set(USE_SORT ON)

# Whether to use Arm Compute Library (ACL) codegen
# We provide 2 separate flags since we cannot build the ACL runtime on x86.
# This is useful for cases where you want to cross-compile a relay graph
# on x86 then run on AArch.
#
# An example of how to use this can be found here: docs/deploy/arm_compute_lib.rst.
#
# USE_ARM_COMPUTE_LIB - Support for compiling a relay graph offloading supported
#                       operators to Arm Compute Library. OFF/ON
# USE_ARM_COMPUTE_LIB_GRAPH_EXECUTOR - Run Arm Compute Library annotated functions via the ACL
#                                     runtime. OFF/ON/"path/to/ACL"
set(USE_ARM_COMPUTE_LIB OFF)
set(USE_ARM_COMPUTE_LIB_GRAPH_EXECUTOR OFF)

# Whether to build with Arm Ethos-N support
# Possible values:
# - OFF: disable Arm Ethos-N support
# - path/to/arm-ethos-N-stack: use a specific version of the
#   Ethos-N driver stack
set(USE_ETHOSN OFF)
# If USE_ETHOSN is enabled, use ETHOSN_HW (ON) if Ethos-N hardware is available on this machine
# otherwise use ETHOSN_HW (OFF) to use the software test infrastructure
set(USE_ETHOSN_HW OFF)

# Whether to build with Arm(R) Ethos(TM)-U NPU codegen support
set(USE_ETHOSU OFF)

# Whether to build with CMSIS-NN external library support.
# See https://github.com/ARM-software/CMSIS_5
set(USE_CMSISNN OFF)

# Whether to build with TensorRT codegen or runtime
# Examples are available here: docs/deploy/tensorrt.rst.
#
# USE_TENSORRT_CODEGEN - Support for compiling a relay graph where supported operators are
#                        offloaded to TensorRT. OFF/ON
# USE_TENSORRT_RUNTIME - Support for running TensorRT compiled modules, requires presense of
#                        TensorRT library. OFF/ON/"path/to/TensorRT"
set(USE_TENSORRT_CODEGEN OFF)
set(USE_TENSORRT_RUNTIME OFF)

# Whether use VITIS-AI codegen
set(USE_VITIS_AI OFF)

# Build Verilator codegen and runtime
set(USE_VERILATOR OFF)

#Whether to use CLML codegen
set(USE_CLML OFF)
# USE_CLML_GRAPH_EXECUTOR - CLML SDK PATH or ON or OFF
set(USE_CLML_GRAPH_EXECUTOR OFF)

# Build ANTLR parser for Relay text format
# Possible values:
# - ON: enable ANTLR by searching default locations (cmake find_program for antlr4 and /usr/local for jar)
# - OFF: disable ANTLR
# - /path/to/antlr-*-complete.jar: path to specific ANTLR jar file
set(USE_ANTLR OFF)

# Whether use Relay debug mode
set(USE_RELAY_DEBUG OFF)

# Whether to build fast VTA simulator driver
set(USE_VTA_FSIM OFF)

# Whether to build cycle-accurate VTA simulator driver
set(USE_VTA_TSIM OFF)

# Whether to build VTA FPGA driver (device side only)
set(USE_VTA_FPGA OFF)

# Whether use Thrust
set(USE_THRUST OFF)

# Whether use cuRAND
set(USE_CURAND OFF)

# Whether to build the TensorFlow TVMDSOOp module
set(USE_TF_TVMDSOOP OFF)

# Whether to build the PyTorch custom class module
set(USE_PT_TVMDSOOP OFF)

# Whether to use STL's std::unordered_map or TVM's POD compatible Map
set(USE_FALLBACK_STL_MAP OFF)

# Whether to enable Hexagon support
set(USE_HEXAGON OFF)
set(USE_HEXAGON_SDK /path/to/sdk)

# Whether to build the minimal support android rpc server for Hexagon
set(USE_HEXAGON_RPC OFF)

# Hexagon architecture to target when compiling TVM itself (not the target for
# compiling _by_ TVM). This applies to components like the TVM runtime, but is
# also used to select correct include/library paths from the Hexagon SDK when
# building runtime for Android.
# Valid values are v65, v66, v68, v69.
set(USE_HEXAGON_ARCH "v66")

# Whether to use QHL library
set(USE_HEXAGON_QHL OFF)

# Whether to use ONNX codegen
set(USE_TARGET_ONNX OFF)

# Whether enable BNNS runtime
set(USE_BNNS OFF)

# Whether to use libbacktrace
# Libbacktrace provides line and column information on stack traces from errors.
# It is only supported on linux and macOS.
# Possible values:
# - AUTO: auto set according to system information and feasibility
# - ON: enable libbacktrace
# - OFF: disable libbacktrace
set(USE_LIBBACKTRACE AUTO)

# Whether to install a signal handler to print a backtrace on segfault. This
# may replace existing signal handlers specified by other libraries.
set(BACKTRACE_ON_SEGFAULT OFF)

# Whether to build static libtvm_runtime.a, the default is to build the dynamic
# version: libtvm_runtime.so.
#
# The static runtime library needs to be linked into executables with the linker
# option --whole-archive (or its equivalent). The reason is that the TVM registry
# mechanism relies on global constructors being executed at program startup.
# Global constructors alone are not sufficient for the linker to consider a
# library member to be used, and some of such library members (object files) may
# not be included in the final executable. This would make the corresponding
# runtime functions to be unavailable to the program.
set(BUILD_STATIC_RUNTIME OFF)

# Caches the build so that building is faster when switching between branches.
# If you switch branches, build and then encounter a linking error, you may
# need to regenerate the build tree through "make .." (the cache will
# still provide significant speedups).
# Possible values:
# - AUTO: search for path to ccache, disable if not found.
# - ON: enable ccache by searching for the path to ccache, report an error if not found
# - OFF: disable ccache
# - /path/to/ccache: use specific path to ccache
set(USE_CCACHE AUTO)

# Whether to enable PAPI support in profiling. PAPI provides access to hardware
# counters while profiling.
# Possible values:
# - ON: enable PAPI support. Will search PKG_CONFIG_PATH for a papi.pc
# - OFF: disable PAPI support.
# - /path/to/folder/containing/: Path to folder containing papi.pc.
set(USE_PAPI OFF)

# Whether to use GoogleTest for C++ unit tests. When enabled, the generated
# build file (e.g. Makefile) will have a target "cpptest".
# Possible values:
# - ON: enable GoogleTest. The package `GTest` will be required for cmake
#   to succeed.
# - OFF: disable GoogleTest.
# - AUTO: cmake will attempt to find the GTest package, if found GTest will
#   be enabled, otherwise it will be disabled.
# Note that cmake will use `find_package` to find GTest. Please use cmake's
# predefined variables to specify the path to the GTest package if needed.
set(USE_GTEST AUTO)

# Enable using CUTLASS as a BYOC backend
# Need to have USE_CUDA=ON
set(USE_CUTLASS OFF)

# Enable to show a summary of TVM options
set(SUMMARIZE OFF)

# Whether to use LibTorch as backend
# To enable pass the path to the root libtorch (or PyTorch) directory
# OFF or /path/to/torch/
set(USE_LIBTORCH OFF)

# Whether to use the Universal Modular Accelerator Interface
set(USE_UMA OFF)

# Set custom Alloc Alignment for device allocated memory ndarray points to
set(USE_KALLOC_ALIGNMENT 64)