diff --git a/examples/07-TwinBuilder/02-Wiring_A_Rectifier.py b/examples/07-TwinBuilder/02-Wiring_A_Rectifier.py
new file mode 100644
index 00000000000..390b39cd40f
--- /dev/null
+++ b/examples/07-TwinBuilder/02-Wiring_A_Rectifier.py
@@ -0,0 +1,141 @@
+"""
+Wiring a Rectifier with Capacitive Filter in Twin Builder
+------------------------------------------
+This example shows how you can use PyAEDT to create a Twin Builder design
+and run a Twin Builder time-domain simulation.
+"""
+
+###############################################################################
+# Import Required Packages for Twin Builder
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+import os
+import math
+import matplotlib.pyplot as plt
+from pyaedt import TwinBuilder
+
+###############################################################################
+# Select Version and Launch Options
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# This example launches Twin Builder 2021.2 in graphical mode.
+
+# You can change the Boolean parameter ``non_graphical`` to ``True`` to launch
+# Twin Builder in non graphical mode.
+# You can change the Boolean parameter ``new_thread`` to ``False`` to launch
+# Twin Builder in existing Desktop Session, if any.
+
+desktop_version = "2021.2"
+non_graphical = False
+new_thread = True
+
+###############################################################################
+# Launch Twin Builder
+# ~~~~~~~~~~~~~~~~~~~
+# Use implicit declaration to launch Twin Builder Application
+
+# Add a new Twin Builder design with a default setup
+
+tb = TwinBuilder(specified_version=desktop_version, non_graphical=non_graphical, new_desktop_session=new_thread)
+
+###############################################################################
+# Create Components for a bridge rectifier with capacitor filter
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+
+# Define the Grid Distance for ease of calculations
+
+G = 0.00254
+
+# Place an AC sinosoidal source component
+
+source = tb.modeler.schematic.create_voltage_source("V_AC", "ESINE", 100, 50, [-1 * G, 0])
+
+# Place four diodes of the bridge rectifier
+
+diode1 = tb.modeler.schematic.create_diode("D1", [10 * G, 6 * G], 3 * math.pi / 2)
+diode2 = tb.modeler.schematic.create_diode("D2", [20 * G, 6 * G], 3 * math.pi / 2)
+diode3 = tb.modeler.schematic.create_diode("D3", [10 * G, -4 * G], 3 * math.pi / 2)
+diode4 = tb.modeler.schematic.create_diode("D4", [20 * G, -4 * G], 3 * math.pi / 2)
+
+# Place capacitor filter
+
+capacitor = tb.modeler.schematic.create_capacitor("C_FILTER", 1e-6, [29 * G, -10 * G])
+
+# Place load resistor
+
+resistor = tb.modeler.schematic.create_resistor("RL", 100000, [39 * G, -10 * G])
+
+# Place a ground
+
+gnd = tb.modeler.components.create_gnd([5 * G, -16 * G])
+
+###############################################################################
+# Connect Components
+# ~~~~~~~~~~~~~~~~~~
+# This method connects components with wires.
+
+# Wire the diode bridge
+
+tb.modeler.schematic.create_wire([diode1.pins[0].location, diode3.pins[0].location])
+tb.modeler.schematic.create_wire([diode2.pins[1].location, diode4.pins[1].location])
+tb.modeler.schematic.create_wire([diode1.pins[1].location, diode2.pins[0].location])
+tb.modeler.schematic.create_wire([diode3.pins[1].location, diode4.pins[0].location])
+
+# Wire the AC Source
+
+tb.modeler.schematic.create_wire([source.pins[1].location, [0, 10 * G], [15 * G, 10 * G], [15 * G, 5 * G]])
+tb.modeler.schematic.create_wire([source.pins[0].location, [0, -10 * G], [15 * G, -10 * G], [15 * G, -5 * G]])
+
+# Wire the Filter Capacitor and Load Resistor
+
+tb.modeler.schematic.create_wire([resistor.pins[0].location, [40 * G, 0], [22 * G, 0]])
+tb.modeler.schematic.create_wire([capacitor.pins[0].location, [30 * G, 0]])
+
+# Wire the ground
+
+tb.modeler.schematic.create_wire([resistor.pins[1].location, [40 * G, -15 * G], gnd.pins[0].location])
+tb.modeler.schematic.create_wire([capacitor.pins[1].location, [30 * G, -15 * G]])
+tb.modeler.schematic.create_wire([gnd.pins[0].location, [5 * G, 0], [8 * G, 0]])
+
+###############################################################################
+# Parametrize a Transient Setup
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# This method setup the end time for the default transient setup.
+
+tb.set_end_time("100ms")
+
+###############################################################################
+# Solve the Transient Setup
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# This method solves the transient setup.
+
+tb.analyze_setup("TR")
+
+
+###############################################################################
+# Get Report Data and plot it on matplotlib
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+# Get the values for the voltage on the Pulse voltage source
+# Get the values for the voltage on the capacitor in the RC Circuit
+
+E_Value = "V_AC.V"
+x = tb.post.get_report_data(E_Value, "TR", "Time", {"Time": ["All"]})
+plt.plot(x.sweeps["Time"], x.data_real(E_Value))
+
+R_Value = "RL.V"
+x = tb.post.get_report_data(R_Value, "TR", "Time", {"Time": ["All"]})
+plt.plot(x.sweeps["Time"], x.data_real(R_Value))
+
+plt.grid()
+plt.xlabel("Time")
+plt.ylabel("AC to DC Conversion using Rectifier")
+plt.show()
+
+###############################################################################
+# Close Twin Builder
+# ~~~~~~~~~~~~~~~~~~
+# After the simulaton is completed, you can close Twin Builder or release it
+# All methods provide for saving the project before exiting.
+
+if os.name != "posix":
+    tb.release_desktop()
diff --git a/pyaedt/modeler/PrimitivesSimplorer.py b/pyaedt/modeler/PrimitivesSimplorer.py
index e7dfdec3aeb..a0c0fa83a3e 100644
--- a/pyaedt/modeler/PrimitivesSimplorer.py
+++ b/pyaedt/modeler/PrimitivesSimplorer.py
@@ -236,15 +236,13 @@ def create_voltage_source(
         return id
 
     @aedt_exception_handler
-    def create_diode(self, compname=None, model_name="required", location=[], angle=0, use_instance_id_netlist=False):
+    def create_diode(self, compname=None, location=[], angle=0, use_instance_id_netlist=False):
         """Create a diode.
 
         Parameters
         ----------
         compname : str, optional
             Name of the diode. The default is ``None``.
-        model_name : str, optional
-            Name of the model. The default is ``"required"``.
         location : list of float, optional
             Position on the X axis and Y axis.
         angle : float, optional