diff --git a/resources/definitions/flashforge_adventurer3.def.json b/resources/definitions/flashforge_adventurer3.def.json
new file mode 100644
index 00000000000..57879584010
--- /dev/null
+++ b/resources/definitions/flashforge_adventurer3.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Adventurer 3",
+    "inherits": "flashforge_adventurer3c",
+    "metadata": 
+    {
+        "author": "Jeremie-C",
+        "visible": true,
+        "supports_network_connection": true
+    },
+    "overrides": 
+    {
+        "machine_name": {"default_value": "Adventurer 3"}
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/flashforge_adventurer3c.def.json b/resources/definitions/flashforge_adventurer3c.def.json
new file mode 100644
index 00000000000..9321c2ca400
--- /dev/null
+++ b/resources/definitions/flashforge_adventurer3c.def.json
@@ -0,0 +1,24 @@
+{
+    "version": 2,
+    "name": "Adventurer 3C",
+    "inherits": "flashforge_adventurer_base",
+    "metadata": {
+        "author": "Jeremie-C",
+        "visible": true,
+        "quality_definition": "flashforge_adventurer3"
+    },
+    "overrides": 
+    {
+        "default_material_bed_temperature": {"maximum_value_warning": "100"},
+        "gantry_height": {"value": "150"},
+        "machine_center_is_zero": {"default_value": true},
+        "machine_depth": {"default_value": 150},
+        "machine_end_gcode": {"default_value": ";end gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18"},
+        "machine_head_with_fans_polygon": {"default_value": [[-20, 10], [-20, -10], [10, 10], [10, -10]]},
+        "machine_height": {"default_value": 150},
+        "machine_name": {"default_value": "Adventurer 3C"},
+        "machine_start_gcode": {"default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start"},
+        "machine_width": {"default_value": 150},
+        "speed_print": {"maximum_value_warning": 100}
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/flashforge_adventurer4.def.json b/resources/definitions/flashforge_adventurer4.def.json
new file mode 100644
index 00000000000..d3b29c4f4a1
--- /dev/null
+++ b/resources/definitions/flashforge_adventurer4.def.json
@@ -0,0 +1,25 @@
+{
+    "version": 2,
+    "name": "Adventurer 4",
+    "inherits": "flashforge_adventurer_base",
+    "metadata": 
+    {
+        "author": "Jeremie-C",
+        "visible": true,
+        "quality_definition": "flashforge_adventurer4",
+        "supports_network_connection": true
+    },
+    "overrides": 
+    {
+        "default_material_bed_temperature": {"maximum_value_warning": "110"},
+        "gantry_height": {"value": "250"},
+        "machine_depth": {"default_value": 200},
+        "machine_end_gcode": {"default_value": ";End Gcode\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18"},
+        "machine_head_with_fans_polygon": {"default_value": [[-20, 10], [-20, -10], [10, 10], [10, -10]]},
+        "machine_height": {"default_value": 250},
+        "machine_name": {"default_value": "Adventurer 4"},
+        "machine_start_gcode": {"default_value": ";Start Gcode\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n;End Start"},
+        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
+        "machine_width": {"default_value": 220}
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/flashforge_adventurer4lite.def.json b/resources/definitions/flashforge_adventurer4lite.def.json
new file mode 100644
index 00000000000..05534793d81
--- /dev/null
+++ b/resources/definitions/flashforge_adventurer4lite.def.json
@@ -0,0 +1,14 @@
+{
+    "version": 2,
+    "name": "Adventurer 4 Lite",
+    "inherits": "flashforge_adventurer4",
+    "metadata": 
+    {
+        "author": "Jeremie-C",
+        "visible": true
+    },
+    "overrides": 
+    {
+        "machine_name": { "default_value": "Adventurer 4 Lite" }
+    }
+}
\ No newline at end of file
diff --git a/resources/definitions/flashforge_adventurer_base.def.json b/resources/definitions/flashforge_adventurer_base.def.json
new file mode 100644
index 00000000000..7a31d6400f8
--- /dev/null
+++ b/resources/definitions/flashforge_adventurer_base.def.json
@@ -0,0 +1,34 @@
+{
+    "version": 2,
+    "name": "Flashforge Adventurer Base",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "author": "Jeremie-C",
+        "manufacturer": "Flashforge",
+        "visible": false,
+        "file_formats": "application/gx;text/x-gcode",
+        "first_start_actions": ["MachineSettingsAction"],
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_variants": true,
+        "machine_extruder_trains": {"0": "flashforge_adventurer_extruder_0"},
+        "preferred_material": "generic_pla",
+        "preferred_quality_type": "normal",
+        "preferred_variant_name": "0.4mm Nozzle",
+        "variants_name": "Nozzle Size"
+    },
+    "overrides":
+    {
+        "adhesion_type": {"default_value": "skirt"},
+        "default_material_print_temperature": {"maximum_value_warning": "265"},
+        "layer_height": 
+        {
+            "minimum_value_warning": "0.1",
+            "maximum_value_warning": "0.4"
+        },
+        "machine_center_is_zero": {"default_value": true},
+        "machine_gcode_flavor": {"default_value": "RepRap (Marlin/Sprinter)"},
+        "machine_heated_bed": {"default_value": true}
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/flashforge_adventurer_extruder_0.def.json b/resources/extruders/flashforge_adventurer_extruder_0.def.json
new file mode 100644
index 00000000000..d8b902a97b9
--- /dev/null
+++ b/resources/extruders/flashforge_adventurer_extruder_0.def.json
@@ -0,0 +1,16 @@
+{
+    "version": 2,
+    "name": "Extruder",
+    "inherits": "fdmextruder",
+    "metadata":
+    {
+        "machine": "flashforge_adventurer_base",
+        "position": "0"
+    },
+    "overrides":
+    {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
\ No newline at end of file
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_fine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..63488b25cf3
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_vfine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..466e76686a1
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.3_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 45
+speed_travel = 100
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_draft.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..678ab9d3711
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 70
+speed_travel = 90
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..0b2e235d921
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 60
+speed_travel = 80
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..b71dc27d96f
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 40
+speed_travel = 70
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_normal.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..9641fb7befd
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_normal.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Standard
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 60
+speed_travel = 80
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..5c1c0138e8a
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 90
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..465ee99c889
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.4_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 35
+speed_travel = 70
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_draft.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..7fae92a4878
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 55
+speed_travel = 100
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_fast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..7f99640845c
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_vfast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..c0212259a13
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer3_abs_0.6_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_fine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..ac6dfe5a332
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_vfine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..4c4a0873d31
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.3_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 45
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_draft.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..62ad84398cc
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 70
+speed_travel = 90
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..b15ad40f221
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 60
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..1d325765ff3
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 40
+speed_travel = 70
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_normal.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..c4e43d5eac8
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 60
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..f3f8ada9d91
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 90
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfine.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..5eefe214071
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.4_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 35
+speed_travel = 70
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_draft.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..bf7f894937f
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 55
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_fast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..e97b00157b7
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_vfast.inst.cfg b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..4ccdd810533
--- /dev/null
+++ b/resources/quality/flashforge/abs/flashforge_adventurer4_abs_0.6_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_abs
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fast.inst.cfg b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..5677c663f1b
--- /dev/null
+++ b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_asa
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 45
+speed_travel = 100
+retraction_amount = 4.5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fine.inst.cfg b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..f9f6c6287d4
--- /dev/null
+++ b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_asa
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 35
+speed_travel = 100
+retraction_amount = 4.5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_normal.inst.cfg b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..ba9bb86f37f
--- /dev/null
+++ b/resources/quality/flashforge/asa/flashforge_adventurer4_asa_0.4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+material = generic_asa
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 40
+speed_travel = 100
+retraction_amount = 4.5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/flashforge_adventurer3_draft.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_draft.inst.cfg
new file mode 100644
index 00000000000..61123554fb0
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_draft.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 22
+type = quality
+weight = -3
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.4
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer3_fast.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_fast.inst.cfg
new file mode 100644
index 00000000000..f9d1cda998d
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_fast.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fast
+setting_version = 22
+type = quality
+weight = -1
+
+[values]
+layer_height = 0.25
+layer_height_0 = 0.3
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer3_fine.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_fine.inst.cfg
new file mode 100644
index 00000000000..2d0d2d5b81d
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_fine.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fine
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.23
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer3_normal.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_normal.inst.cfg
new file mode 100644
index 00000000000..b70f28c86f4
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_normal.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Standard
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 22
+type = quality
+weight = 0
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer3_vfast.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_vfast.inst.cfg
new file mode 100644
index 00000000000..3f6379a6f57
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_vfast.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = veryfast
+setting_version = 22
+type = quality
+weight = -2
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.3
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer3_vfine.inst.cfg b/resources/quality/flashforge/flashforge_adventurer3_vfine.inst.cfg
new file mode 100644
index 00000000000..b2015d40ea1
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer3_vfine.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = veryfine
+setting_version = 22
+type = quality
+weight = 2
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.18
+retraction_amount = 5
+retraction_speed = 25
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_draft.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_draft.inst.cfg
new file mode 100644
index 00000000000..b2f6dc976ca
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = draft
+setting_version = 22
+type = quality
+weight = -3
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.4
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_fast.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_fast.inst.cfg
new file mode 100644
index 00000000000..a0a38c36557
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fast
+setting_version = 22
+type = quality
+weight = -1
+
+[values]
+layer_height = 0.25
+layer_height_0 = 0.3
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_fine.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_fine.inst.cfg
new file mode 100644
index 00000000000..8a5615287bd
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = fine
+setting_version = 22
+type = quality
+weight = 1
+
+[values]
+layer_height = 0.15
+layer_height_0 = 0.23
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_normal.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_normal.inst.cfg
new file mode 100644
index 00000000000..64d0df68fcd
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = normal
+setting_version = 22
+type = quality
+weight = 0
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.3
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_vfast.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_vfast.inst.cfg
new file mode 100644
index 00000000000..0b78e0e23e4
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = veryfast
+setting_version = 22
+type = quality
+weight = -2
+
+[values]
+layer_height = 0.3
+layer_height_0 = 0.3
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/flashforge_adventurer4_vfine.inst.cfg b/resources/quality/flashforge/flashforge_adventurer4_vfine.inst.cfg
new file mode 100644
index 00000000000..d3012d5975a
--- /dev/null
+++ b/resources/quality/flashforge/flashforge_adventurer4_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+global_quality = True
+quality_type = veryfine
+setting_version = 22
+type = quality
+weight = 2
+
+[values]
+layer_height = 0.1
+layer_height_0 = 0.18
+speed_infill = =speed_print
+speed_layer_0 = 10
+speed_support = =math.ceil(speed_print * 0.6)
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_draft.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..92467d9d577
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 50
+speed_travel = 90
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_fast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..85811430f48
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 40
+speed_travel = 80
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_normal.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..53431e511b0
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_normal.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Standard
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 40
+speed_travel = 80
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_vfast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..6d35450f90d
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.4_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 90
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_draft.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..bf0c0cce2d6
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 60
+speed_travel = 100
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_fast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..c7599784fab
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_vfast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..7efde414c29
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer3_pc_0.6_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_draft.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..a593db1ef29
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 50
+speed_travel = 90
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_fast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..7d7e9377262
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 40
+speed_travel = 80
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_normal.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..0806db424ed
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 40
+speed_travel = 80
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_vfast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..3556c8bf062
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.4_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 90
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_draft.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..4cd2861cbe9
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 60
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_fast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..14e162a1fc4
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_vfast.inst.cfg b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..f5a918d859f
--- /dev/null
+++ b/resources/quality/flashforge/pc/flashforge_adventurer4_pc_0.6_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pc
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_fine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..e640d316fe7
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 80
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_vfine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..7ef3d79fe8a
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.3_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 50
+speed_travel = 80
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_draft.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..c51711ca2df
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 65
+speed_travel = 100
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..abc16dfcb70
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 55
+speed_travel = 85
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..6c39de897c6
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 40
+speed_travel = 80
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_normal.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..be51926c7a5
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_normal.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Standard
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 50
+speed_travel = 80
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..1d8286d2047
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 90
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..d06baed13c8
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.4_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 40
+speed_travel = 80
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_draft.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..2f54c96ea41
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 65
+speed_travel = 100
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_fast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..aa55c43ad73
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_vfast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..cb226be3c45
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer3_petg_0.6_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_fine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..a17c8d9648d
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_vfine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..5091364e724
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.3_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 50
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_draft.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..3a144895591
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 65
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..b573bf5ea6f
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 55
+speed_travel = 85
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..e00ff6968ae
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 40
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_normal.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..56df96187f0
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 50
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..7001124129f
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 90
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfine.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..a6249569343
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.4_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 40
+speed_travel = 80
+retraction_amount = 5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_draft.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..5976fdf2258
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -3
+
+[values]
+speed_print = 65
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 20
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_fast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..39d500ea83d
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 20
diff --git a/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_vfast.inst.cfg b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..0d7f397d7e5
--- /dev/null
+++ b/resources/quality/flashforge/petg/flashforge_adventurer4_petg_0.6_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_petg
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 20
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_fine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..ee221f58146
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_vfine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..10861d3ac89
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.3_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 45
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_draft.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..b31667ce5f1
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -3
+
+[values]
+speed_print = 75
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..1517fb90868
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 65
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..b92f15246c9
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_fine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 80
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_normal.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..cb7476638bb
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_normal.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Standard
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 60
+speed_travel = 80
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..970670b2113
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 70
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..a38658883b3
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.4_vfine.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 40
+speed_travel = 70
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_draft.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..620302a4814
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_fast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..e2f91de8124
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_fast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 50
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_vfast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..b9f6ae4e88f
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer3_pla_0.6_vfast.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+definition = flashforge_adventurer3
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 55
+speed_travel = 100
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_fine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_fine.inst.cfg
new file mode 100644
index 00000000000..3ef15e17363
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 1
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_vfine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_vfine.inst.cfg
new file mode 100644
index 00000000000..cdd22c946f4
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.3_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.3mm Nozzle
+weight = 2
+
+[values]
+speed_print = 45
+speed_travel = 100
+retraction_amount = 5
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_draft.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_draft.inst.cfg
new file mode 100644
index 00000000000..993064a6dfe
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 65
+speed_travel = 100
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fast.inst.cfg
new file mode 100644
index 00000000000..2d4aff0fe66
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -1
+
+[values]
+speed_print = 55
+speed_travel = 100
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fine.inst.cfg
new file mode 100644
index 00000000000..37e0731f504
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_fine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 1
+
+[values]
+speed_print = 45
+speed_travel = 90
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_normal.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_normal.inst.cfg
new file mode 100644
index 00000000000..8e2fe1b043e
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_normal.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Standard
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = normal
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 0
+
+[values]
+speed_print = 50
+speed_travel = 100
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfast.inst.cfg
new file mode 100644
index 00000000000..dc887117c00
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 100
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfine.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfine.inst.cfg
new file mode 100644
index 00000000000..cdd5aae558e
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.4_vfine.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fine
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfine
+setting_version = 22
+type = quality
+variant = 0.4mm Nozzle
+weight = 2
+
+[values]
+speed_print = 40
+speed_travel = 80
+retraction_amount = 5.5
+retraction_speed = 25
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_draft.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_draft.inst.cfg
new file mode 100644
index 00000000000..ac4966df734
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_draft.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Draft
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = draft
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 65
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_fast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_fast.inst.cfg
new file mode 100644
index 00000000000..77538fb95e9
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_fast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = fast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -1
+
+[values]
+speed_print = 60
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_vfast.inst.cfg b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_vfast.inst.cfg
new file mode 100644
index 00000000000..923d526e69b
--- /dev/null
+++ b/resources/quality/flashforge/pla/flashforge_adventurer4_pla_0.6_vfast.inst.cfg
@@ -0,0 +1,18 @@
+[general]
+definition = flashforge_adventurer4
+name = Very Fast
+version = 4
+
+[metadata]
+material = generic_pla
+quality_type = veryfast
+setting_version = 22
+type = quality
+variant = 0.6mm Nozzle
+weight = -2
+
+[values]
+speed_print = 60
+speed_travel = 100
+retraction_amount = 6
+retraction_speed = 30
diff --git a/resources/variants/flashforge/flashforge_adventurer3_0.3.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3_0.3.inst.cfg
new file mode 100644
index 00000000000..9233d066d25
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
diff --git a/resources/variants/flashforge/flashforge_adventurer3_0.4.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3_0.4.inst.cfg
new file mode 100644
index 00000000000..9217a0a5187
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
diff --git a/resources/variants/flashforge/flashforge_adventurer3_0.6.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3_0.6.inst.cfg
new file mode 100644
index 00000000000..5e712bb0f51
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
diff --git a/resources/variants/flashforge/flashforge_adventurer3c_0.3.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3c_0.3.inst.cfg
new file mode 100644
index 00000000000..c7162ed63bf
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3c_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3c
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
diff --git a/resources/variants/flashforge/flashforge_adventurer3c_0.4.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3c_0.4.inst.cfg
new file mode 100644
index 00000000000..75b8cf227d3
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3c_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3c
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
diff --git a/resources/variants/flashforge/flashforge_adventurer3c_0.6.inst.cfg b/resources/variants/flashforge/flashforge_adventurer3c_0.6.inst.cfg
new file mode 100644
index 00000000000..07898deed71
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer3c_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer3c
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
diff --git a/resources/variants/flashforge/flashforge_adventurer4_0.3.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4_0.3.inst.cfg
new file mode 100644
index 00000000000..36902259f16
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
diff --git a/resources/variants/flashforge/flashforge_adventurer4_0.4.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4_0.4.inst.cfg
new file mode 100644
index 00000000000..8433cc42d83
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
diff --git a/resources/variants/flashforge/flashforge_adventurer4_0.6.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4_0.6.inst.cfg
new file mode 100644
index 00000000000..39604fef550
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
diff --git a/resources/variants/flashforge/flashforge_adventurer4lite_0.3.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4lite_0.3.inst.cfg
new file mode 100644
index 00000000000..8c1a1d6e2f6
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4lite_0.3.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4lite
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
diff --git a/resources/variants/flashforge/flashforge_adventurer4lite_0.4.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4lite_0.4.inst.cfg
new file mode 100644
index 00000000000..16d88764855
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4lite_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4lite
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
diff --git a/resources/variants/flashforge/flashforge_adventurer4lite_0.6.inst.cfg b/resources/variants/flashforge/flashforge_adventurer4lite_0.6.inst.cfg
new file mode 100644
index 00000000000..b9832c7d84d
--- /dev/null
+++ b/resources/variants/flashforge/flashforge_adventurer4lite_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+definition = flashforge_adventurer4lite
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.6