From 501b15753d1ef931fea1e79183844ccd6d326598 Mon Sep 17 00:00:00 2001 From: "c.lamboo" Date: Thu, 22 Feb 2024 16:20:39 +0100 Subject: [PATCH 01/10] Revert "Change prime_tower_enable to prime_tower_mode in all defs/profiles" This reverts commit 5a291f9ba9e83c85d1bdfe1c0e907e0df8154f6f. --- plugins/LegacyProfileReader/DictionaryOfDoom.json | 2 +- resources/definitions/atmat_signal_pro_base.def.json | 2 +- resources/definitions/deltacomb_dc20flux.def.json | 2 +- resources/definitions/deltacomb_dc21flux.def.json | 2 +- resources/definitions/deltacomb_dc30flux.def.json | 2 +- resources/definitions/dxu_dual.def.json | 3 ++- resources/definitions/elegoo_neptune_2D.def.json | 1 + resources/definitions/leapfrog_bolt_pro.def.json | 2 +- resources/definitions/lotmaxx_sc60.def.json | 2 +- resources/definitions/strateo3d_IDEX420.def.json | 1 + resources/definitions/ultimaker3.def.json | 1 + resources/definitions/ultimaker_method_base.def.json | 2 +- resources/definitions/ultimaker_s3.def.json | 2 +- resources/definitions/ultimaker_s5.def.json | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg | 2 +- ...Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg | 2 +- .../gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg | 2 +- .../liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg | 2 +- resources/quality/nps/nps_ABS_B.inst.cfg | 2 +- resources/quality/nps/nps_ABS_C.inst.cfg | 2 +- resources/quality/nps/nps_PC_A.inst.cfg | 2 +- resources/quality/nps/nps_PC_B.inst.cfg | 2 +- resources/quality/nps/nps_PC_C.inst.cfg | 2 +- resources/quality/nps/nps_PETG_A.inst.cfg | 2 +- resources/quality/nps/nps_PETG_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg | 2 +- .../strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg | 2 +- .../tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg | 2 +- .../tizyx_evy_dual_global_Normal_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg | 2 +- resources/variants/liquid/liquid_vo08.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_04.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_06.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_08.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_10.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_12.inst.cfg | 2 +- resources/variants/ultimaker3_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker3_extended_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker3_extended_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s3_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s5_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s5_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s7_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s7_bb0.8.inst.cfg | 2 +- 627 files changed, 628 insertions(+), 624 deletions(-) diff --git a/plugins/LegacyProfileReader/DictionaryOfDoom.json b/plugins/LegacyProfileReader/DictionaryOfDoom.json index 90e973b7798..f65cc271d1f 100644 --- a/plugins/LegacyProfileReader/DictionaryOfDoom.json +++ b/plugins/LegacyProfileReader/DictionaryOfDoom.json @@ -68,7 +68,7 @@ "meshfix_keep_open_polygons": "fix_horrible_use_open_bits", "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"", "magic_spiralize": "spiralize", - "prime_tower_mode": "\"normal\" if wipe_tower else \"none\"", + "prime_tower_enable": "wipe_tower", "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))", "ooze_shield_enabled": "ooze_shield", "skin_overlap": "fill_overlap" diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json index 0b8761a62c1..cd59e1c1691 100644 --- a/resources/definitions/atmat_signal_pro_base.def.json +++ b/resources/definitions/atmat_signal_pro_base.def.json @@ -110,7 +110,7 @@ "min_infill_area": { "value": "5.0" }, "minimum_polygon_circumference": { "value": "0.2" }, "optimize_wall_printing_order": { "value": "True" }, - "prime_tower_mode": { "value": "'normal'" }, + "prime_tower_enable": { "value": "True" }, "retraction_amount": { "value": "1" }, "retraction_combing": { "value": "'noskin'" }, "retraction_combing_max_distance": { "value": "10" }, diff --git a/resources/definitions/deltacomb_dc20flux.def.json b/resources/definitions/deltacomb_dc20flux.def.json index f76ba3e4cd0..f81909dae55 100644 --- a/resources/definitions/deltacomb_dc20flux.def.json +++ b/resources/definitions/deltacomb_dc20flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, + "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": "50" }, - "prime_tower_mode": { "value": "'normal'" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc21flux.def.json b/resources/definitions/deltacomb_dc21flux.def.json index 3c2080a87bf..dbcdf3ad37d 100644 --- a/resources/definitions/deltacomb_dc21flux.def.json +++ b/resources/definitions/deltacomb_dc21flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, + "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": "50" }, - "prime_tower_mode": { "value": "'normal'" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc30flux.def.json b/resources/definitions/deltacomb_dc30flux.def.json index 69249e42fd9..7ba4f4252d9 100644 --- a/resources/definitions/deltacomb_dc30flux.def.json +++ b/resources/definitions/deltacomb_dc30flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, + "prime_tower_enable": { "value": "True" }, "prime_tower_min_volume": { "value": "50" }, - "prime_tower_mode": { "value": "'normal'" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/dxu_dual.def.json b/resources/definitions/dxu_dual.def.json index b81d148f80f..6d30af005fc 100644 --- a/resources/definitions/dxu_dual.def.json +++ b/resources/definitions/dxu_dual.def.json @@ -5,6 +5,7 @@ "overrides": { "machine_end_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" }, - "machine_start_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" } + "machine_start_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" }, + "prime_tower_enable": { "default_value": true } } } \ No newline at end of file diff --git a/resources/definitions/elegoo_neptune_2D.def.json b/resources/definitions/elegoo_neptune_2D.def.json index dbdf066b21d..c9aa5a01843 100644 --- a/resources/definitions/elegoo_neptune_2D.def.json +++ b/resources/definitions/elegoo_neptune_2D.def.json @@ -55,6 +55,7 @@ "settable_per_extruder": false }, "prime_blob_enable": { "default_value": false }, + "prime_tower_enable": { "default_value": true }, "prime_tower_min_volume": { "default_value": 90 }, "prime_tower_size": { "default_value": 30 }, "raft_airgap": { "default_value": 0.25 }, diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json index 449967072f5..e4a13217e5f 100644 --- a/resources/definitions/leapfrog_bolt_pro.def.json +++ b/resources/definitions/leapfrog_bolt_pro.def.json @@ -80,7 +80,7 @@ "material_final_print_temperature": { "value": "default_material_print_temperature" }, "material_initial_print_temperature": { "value": "default_material_print_temperature" }, "material_standby_temperature": { "enabled": false }, - "prime_tower_mode": { "resolve": "'normal' if extruders_enabled_count > 1 else 'none'" }, + "prime_tower_enable": { "resolve": "extruders_enabled_count > 1" }, "retraction_amount": { "default_value": 2 }, "retraction_combing": { "value": "'all'" }, "skirt_line_count": { "default_value": 3 }, diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index 64220c372e8..f4ce358be1e 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -44,8 +44,8 @@ "machine_width": { "default_value": 235 }, "meshfix_maximum_resolution": { "value": 0.25 }, "optimize_wall_printing_order": { "value": true }, + "prime_tower_enable": { "value": true }, "prime_tower_min_volume": { "value": 30 }, - "prime_tower_mode": { "value": "'normal'" }, "retract_at_layer_change": { "value": false }, "retraction_amount": { "value": 4.5 }, "roofing_layer_count": { "value": 1 }, diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json index 47a3af714be..d4236c126ed 100644 --- a/resources/definitions/strateo3d_IDEX420.def.json +++ b/resources/definitions/strateo3d_IDEX420.def.json @@ -112,6 +112,7 @@ "machine_use_extruder_offset_to_offset_coords": { "default_value": false }, "machine_width": { "default_value": 420 }, "material_diameter": { "default_value": 1.75 }, + "prime_tower_enable": { "default_value": true }, "prime_tower_min_volume": { "default_value": 35.6 }, "raft_acceleration": { "value": "machine_acceleration" }, "raft_base_acceleration": { "value": "machine_acceleration" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 43f718e2dba..17a4b6045e1 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -149,6 +149,7 @@ "enabled": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" }, + "prime_tower_enable": { "default_value": true }, "prime_tower_position_x": { "value": "185" }, "prime_tower_wipe_enabled": { "default_value": false }, "retraction_amount": { "value": "6.5" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 2c417913d5c..983af7ea27e 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -345,9 +345,9 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, + "prime_tower_enable": { "value": false }, "prime_tower_flow": { "value": "material_flow" }, "prime_tower_line_width": { "value": 1 }, - "prime_tower_mode": { "value": "none" }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, "prime_tower_wipe_enabled": { "value": true }, "print_sequence": { "enabled": false }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index ca40788581d..483825df5a3 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -103,7 +103,7 @@ "default_value": false, "enabled": true }, - "prime_tower_mode": { "value": "'normal'" }, + "prime_tower_enable": { "value": "True" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index 73854f28905..cd48c4fd38c 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -104,7 +104,7 @@ "default_value": false, "enabled": true }, - "prime_tower_mode": { "value": "'normal'" }, + "prime_tower_enable": { "value": "True" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'" }, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index 54807c88b37..f4da80ded99 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index 312313c9c51..a052562cd34 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 485e82345a8..145cd34ead9 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index 7fb90fd0938..e6e2cb78a00 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index ce3fe8c60b6..56587fe8838 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index a95c6ce5d35..10353f61103 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True +prime_tower_enable = True prime_tower_min_volume = 6 -prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg index 2e0d11b6eb4..33b5c2c1110 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg index fc487f97e44..5be0dc95270 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg index 3eef71ef41e..76aa867f8fa 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg index 35534c090ec..20bb125cd9d 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg index d61061ff55d..cc0224cf23f 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg index df09da8d684..ec2ebdc647f 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg index be381678562..136ec93d164 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg index 24299680ad2..3a0a94782cb 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg index 2c89d60680b..719a4bdcbd0 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg index c3cbb96ae73..4486a1d3bc3 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg index 5e062678c30..b938502e857 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg index b9651ddf53e..3b88ca6b671 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg index 3e366410377..41347177703 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg index bdb9ca3ce51..e267e7c6eb1 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg index 741e6c613a9..35e2e07b41d 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg index c8421e34a56..dd944cbfd1c 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg index 39bafd45c64..8aa462e206f 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg index c73c5baecda..0691a01debd 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg index b9f63dff355..a4d0582c3a1 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg index 86e03b328c4..831e17c018e 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg index b51b54cb62c..d9a57d60123 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg index 82ad7d5d49e..8408fbc0148 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg index dcc7dfcd484..18c813a79a2 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg index d0fb6ec6e25..660c536a5e2 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg index 1817111e2a2..5dbea58c49f 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg index 8ba8f905d6e..9bfd649e99e 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg index 82cfb879dda..d5a2f73729c 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg index 3b8cc5bb5f5..e86f4546649 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg index 23e6730f11a..db7e5a43c7f 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -17,7 +17,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg index f3059304488..d84cc9e6563 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -20,7 +20,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg index cfc8fb9b321..b6c63fad0fd 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg index 52ebc5566bf..1e3eec080a6 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg index 683bfe317a6..09bc57ffea1 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg index 40cc88859ad..66eb9f49c08 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 skin_overlap = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg index 6043a569d0b..209ce52fa2b 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg index 30760115559..9805a1ae5a8 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -12,7 +12,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] infill_sparse_density = 15 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.8 diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg index 562b84bf027..cb6ca323e69 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -14,7 +14,7 @@ variant = 0.40mm_Elegoo_Nozzle infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.9 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg index 7178468de7f..d9f0a0aaeaf 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg index cb966418ece..620622e555f 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg index 23733ea85e8..05eeb68305a 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg index 01577a46d0c..b63ef09a6b6 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg @@ -29,7 +29,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg index dc279c62321..038affd56f4 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 20 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg index d5684e3ccb3..5091d36813c 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 45 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg index bd43496eb47..0420284fa85 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 40 / 50) speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg index 420b8a9d9cd..927bdbe7b9e 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 40 / 55) speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg index ec682feabdb..02d1292c171 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg index 591e6e2964b..b1c540d01ed 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg index 604e491db3b..6aac1f4972e 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg index e610dcf4959..e831dfb2540 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg @@ -34,7 +34,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg index 37d77be67c3..6e0ac107189 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg index f27381d0e38..5e84c3e1a12 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg index 1c49689b2ad..8974dcbb034 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg index 82b3f109f40..cbada0be182 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg index e6e18da492c..70817b06e31 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg index 50b8662604d..b6991202b2b 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg index baf7af3fdc3..930f5cf3fd0 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg index bf5fb6b1c9d..6595446feef 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg index 86216145d9b..1904758532a 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature + 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg index 7d4abe2d3f6..2a0a5729ece 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 13 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg index 3aace2ea38d..304c4f17f0b 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg index 04b769ec818..bc712bf9997 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg index 5f7216e9b8c..c51c068ae2d 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg index 0f4b43d1adc..3b6749dfb9b 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg index bf262d9b0d0..45418e5994c 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg index 6f15ddf6869..90424ee65e8 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg index e56ee10a987..7857ed00e75 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg index c8c93a744fb..4194c6f3b7b 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg index 70db87df100..87dd8765880 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg index a134533c462..891a20540dc 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg index d8c5450478e..e0090947603 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg index f941d5a55d7..947c042b8c2 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg index d96bf8d17e8..08cb14cb267 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg index 53142e5348b..187ed1f2123 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg index 5a4cb62ee2b..10b6e8185a5 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg index 4168b05c611..ed0fc7fd8a5 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg index af930c749ad..9def9ecb974 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg index dab7612a6c4..4c3f60a2401 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg index 7ec446e803e..1b7c05ac3c3 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg index 9913ea37791..7cbb60c3aac 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg @@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg index 54d9c23b989..4994e3f9f45 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg @@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg index 289e9d48b7f..fd15d041b82 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg @@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg index c8cad9bb3fa..5c88fb165f8 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg @@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/nps/nps_ABS_B.inst.cfg b/resources/quality/nps/nps_ABS_B.inst.cfg index 520bda4b056..3f700405bdb 100644 --- a/resources/quality/nps/nps_ABS_B.inst.cfg +++ b/resources/quality/nps/nps_ABS_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 96 material_print_temperature = =default_material_print_temperature + 13 material_print_temperature_layer_0 = =243 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_ABS_C.inst.cfg b/resources/quality/nps/nps_ABS_C.inst.cfg index 1131f61d36f..6138e4004c0 100644 --- a/resources/quality/nps/nps_ABS_C.inst.cfg +++ b/resources/quality/nps/nps_ABS_C.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 91 material_print_temperature = =default_material_print_temperature + 15 material_print_temperature_layer_0 = =245 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_A.inst.cfg b/resources/quality/nps/nps_PC_A.inst.cfg index 90cc71d9516..8665f8ceaee 100644 --- a/resources/quality/nps/nps_PC_A.inst.cfg +++ b/resources/quality/nps/nps_PC_A.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =280 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_B.inst.cfg b/resources/quality/nps/nps_PC_B.inst.cfg index 3761d802d76..9ccb5cea534 100644 --- a/resources/quality/nps/nps_PC_B.inst.cfg +++ b/resources/quality/nps/nps_PC_B.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_C.inst.cfg b/resources/quality/nps/nps_PC_C.inst.cfg index 85752e78c21..30267d42375 100644 --- a/resources/quality/nps/nps_PC_C.inst.cfg +++ b/resources/quality/nps/nps_PC_C.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_A.inst.cfg b/resources/quality/nps/nps_PETG_A.inst.cfg index 0985dd1b3ad..3cae430f1cc 100644 --- a/resources/quality/nps/nps_PETG_A.inst.cfg +++ b/resources/quality/nps/nps_PETG_A.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 98 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg index e3a5f165ada..5860f654146 100644 --- a/resources/quality/nps/nps_PETG_B.inst.cfg +++ b/resources/quality/nps/nps_PETG_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 95 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg index 0569a356f35..39ba32a332a 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg index e906508f7f5..dd0d167e6bc 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg index a883aba2ec4..f894a7dc139 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg index dc595e8c5df..7642489c2a9 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg index a84b12135fc..bf5c18405bc 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg index ef6358a6a00..6756384e4af 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg index 7a0cd7ee8d5..978484d8130 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg index 4fa5d070aa6..bcec4fe68f4 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg index 7944c44371e..85f79ebe7a0 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg index fb2ee81c9f2..9b29e496242 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg index 4e63f1513d1..07a46f0d05b 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg index 5e158007ab2..60410d8d346 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg index f73adbfa513..93046306306 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg index da2aa052377..d39d91c91ae 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg index e636a5ebee1..e716824cf03 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg index a997ac74dd9..bd964bed2a5 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg index 7055e3daddf..cd27f777376 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg index 6c66ffd76cb..78191af7be7 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg index f451618a284..f37a3b4d6d0 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg index 5866dad50bb..75fed99b1ec 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg index 502dd8be072..51911c3811d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg index 52792281055..e4596d9def1 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg @@ -33,7 +33,7 @@ material_flow = 105 material_flow_layer_0 = 120 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg index 92c62d2b439..d0faf6eb66e 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg index 92811521ac4..3a64a522543 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg index 234d33c2eb1..debf74ed0d7 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg index 76ea2997baa..990d5cf645e 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg index fc3d8e47ec7..82f26cd66d7 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg index f4bfb4c6986..a91b035e38e 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg index 82715060a6b..c7194e18d24 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg index ca19b0ee14d..078e213a262 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg index f61b83ab7b8..bfb4c46c461 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg index 85097b45067..8dd1c17ea69 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg index 967f7c21a5a..cca98aa5997 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg index 91106506291..5a343d68931 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg index de6356694f1..e6be8813412 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg index ec119cba9ff..c4342c149a1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg index 0b4df9f3a3a..e3581e08230 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg index ad5d8c85869..4c451894bdf 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg index e0600e72d81..65c2c9e81f2 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg index 5827b15cf96..2f5cf9cfa3f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg index 3ee7204b929..36d6697edbe 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg index 4834ca9eefb..e92561350a1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg index 4850f68dc0b..e61775fde0b 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg index ec7cbcc0fd2..020b95dad20 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg index 6f086f06056..6688d82ec8c 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg index ff5016d5431..2c8d6a82d3a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg index e3249312699..fe012ff8735 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg index 5aea3605f59..c0adce0f844 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg index 24a1faed482..5b58c2f37bc 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg index d73b6ac7969..f986831fd5f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg index 14d3867950d..5d360b244b1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg index 26e6ebc4df4..3875e668f41 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg index 54954ff5678..d4d0e1c17e9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg index 057fb1b8cc6..f2bb237ea22 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg index 63f71cff826..f6780fbded2 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg index afef00df11b..6e726932a6f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg index 7b81803b0ce..7ef50ff5b13 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg index c0ac99423da..4d4af1e0f7f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg index bd0f177b1b7..0d88c99c856 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg index 586d49b7db8..de476e6e46b 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg index 16c8c5e6aa9..3fe7ff347cc 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg index 71a70f0849a..9dd3039b65e 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg index ad26bba4cbd..346f33bafb5 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg index e4da72d39a7..8571e8c4b02 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg index b7bebe13b75..4231e1b3a14 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg index f3bc48c8c99..c141a0ab079 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg index 70c2d3044c8..9cd4262c552 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg index d52ceb51ea6..6f49ec9e3bf 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg index 6124b1dfed9..415379417c3 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg index b4a8bc21f43..c4ce86563fa 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg index a764026ca71..dc4505591f1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg index 11b9d689c86..224fa18cd6a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg index 7521ef5d628..44737981b04 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg index 6de69d4eba0..8bf71b5cf5f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg index e2b282ab2a6..3102afdc2c9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg index 60d02fac6db..ad6e3615825 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg index 4969aad456c..b7445aee864 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg index 7bf8dc30d42..cc849df9bac 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg index 27cef2d7c97..10cbd3a4cf2 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg index 24e3a1f2384..055bbb76239 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg index 4211634c6d3..028586beb47 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg index bd2c12c3f13..8bc0b97bc58 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg index 589f27a2213..ec355cec15a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg index bca586491d4..3ab4df020ca 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg index 2e90b6fd6f5..455cb44a7b1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg index e2f63845eed..3475c621c3b 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg index bc9df5fa147..d7d937fdefd 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg index 7216eb093c8..e83067bdc8a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg index a90e755a491..188cddf0d6d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg index 1d54fd6b3cc..6127c2ec434 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg index 90d3d005070..ca38be0476c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg index ca2b4a9c9e3..caa9003cb3d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 101 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg index b297719ba13..a10cbdac7d1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg index 34882ab1af7..85fe174e950 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg index 07969b958a9..9b48be1b8b3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg index ecd3384a5b8..0440a0a34a7 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg index a4a87bc3f3e..7f124ae4ece 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg index c0f93168dac..f662c410485 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg index 4116205747f..dae0dda0981 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg index df1fb6e2e75..1079c746ecc 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg index aa5bfa30f22..04991249e9f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg index 887a35f80e9..685778f3f14 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg index a9a4bcb18f9..ab5eca1d474 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg index d73114c313b..a5a2addbc6e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg index e3f0657f1f4..6ecc9a32650 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg index 542f9405b11..9e060959ddc 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg index 43ff676c46d..322d30a975e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg index 2cca8a5c45f..5ae6c32cb89 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg index 951e26d8413..3fbe1f63708 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg index f408c5a293e..46aacdf22ca 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg index 8b72022a0d4..6997dae536c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg index 2540f2bea92..70bb7206af0 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg index c6bd8cc70e0..eb89937deda 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg index 02b8e45e226..4bc567a2d91 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg index 26e2eb50290..f08c2e68b74 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg index f97462d99c7..4a9a1472b8e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg index 540e14ba238..41edbc8e328 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg index af851371a19..10356ad3448 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg index e2470b9ecf5..9f04791ac2a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg index 21c4f9eccc9..56e09ac385a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg index b210d0fd308..6c8a5462aa6 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg index 6b6a5923cef..be4a045e0d8 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg index f677ac9e32c..6b107e9c9bd 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg index 9ed4c381c9a..ca169572b9b 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg index 3f928f436dd..7e7a3ed9d11 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg index d8e702dc7a6..a08e251fe01 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg index 53516d4617f..2bcf4d4b1d3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg index e7298a71d3b..1352a75a8ab 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg index cd9de526ec3..ad699959aac 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 105 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature - 2 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg index 4de06235da3..6fdabc1a83e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg index 431623b7c67..1954931cc71 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg index e0c29062d7e..913af1994be 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg index 9230df64e3c..573834fc791 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg index 7117a889ed9..3d5d1781ae4 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg index 97d2209bdaf..4910a692729 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg index 111504ad7b7..28d395019a5 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg index d5322c039a3..b91ceb1f851 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg index 74d0fa38693..4a32ddceaf2 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg index 80dfbe8dbc1..e45a8970f76 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg index 26decee7ba2..c0a9632b95b 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg index 850458ed36f..bce7e2891fd 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg index 06f9ed6686d..0a053f123ea 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg index 36398c0cfcb..4f167ecacc9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg index 8dd9bc10fb4..8efea7e2640 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg index fb149908d18..d2f6973da76 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg index 47d9a50940a..57e9fc27a4d 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg index e57fefc2b90..2ef4a5b4794 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg index 0cbddce4c91..a7549a851cd 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg index 965c08e8f9b..322f31e9863 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg index 4062997ba0d..6f3fa578bff 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg index e6acfe27b88..ee3166e7da1 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg index 602837f410b..05eabcc6a32 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg index d5bb0ac8ba3..d10b2df53be 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg index 022a6f36bf9..181d89f9579 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg index 35421e68d61..38bd72884bf 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg index 65217b7ff9e..d8b2e660fc8 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg index 118acb433f2..c39338eeca8 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg index c8102ecdf90..f88eff16151 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg index df178b18072..59a6db473db 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg index 95973a44288..9a94498b121 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg index 32073574ead..2611e1deba9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 93 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg index 4b306434b94..35644e47a87 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg index 99a245dfb49..a820dd84676 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 98 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg index d7ecb957489..a4f135a4fae 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg index 9a973d225d8..ee58caf9e6d 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg @@ -27,7 +27,7 @@ material_flow = 93 material_initial_print_temperature = =default_material_print_temperature material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg index 6ff6a8dd0e8..6399e7fd1fb 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg index 5f19e2ab771..e034d49e6e9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg index 5ea81eab765..632c45a51ff 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg index cc5ecebffe7..e882d420151 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg index d133a60b415..7b52c7bb2d8 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg index 1e243bbea46..a0fcdc4a520 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg index 54889f9923b..496e5fe2159 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg index 8f484b06169..9c676c934bc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg index f328b886459..0b4c3c02811 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 105 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg index 9d11111b78d..ffbb925a229 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 103 material_print_temperature = =default_material_print_temperature + 6 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg index ed25c0fb46c..60af5617e3b 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 101 material_print_temperature = =default_material_print_temperature + 9 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg index 0b70ff0384d..71581b46adc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg index f519ec66d5e..bcbb45062ad 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg index 83c109070a6..827ae4a7ba7 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg index 09ffbaed981..29f88f6e15d 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg index ff50fd3debf..316e5d4447b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg index fbbc7a01875..44203ad144b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg index 95a6d4e7328..e322951476c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg index 2c0caa6a069..b4ee9ea9852 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg index c896adef1bf..708896fdb76 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg index 0dcc4405d74..63ca3d88ff4 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg index 73dce76c2ee..62ed1914db1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg index 36902a619f1..ac9ec6324e8 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg index b0bc012110d..b225d8a9112 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg index baf42116458..6e859c8dd04 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg index 754d20c802e..6b8ebd9d203 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg index 717aed8e494..f168d4cf46c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg index d41dea9d7bd..652876d6b23 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg index b708481aeb3..482b99c2f60 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg index 5e604e6f659..551e79a8e48 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg index 31f7a30f3fb..57097361478 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg index f35389424ce..38f3b2b2efe 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg index 902e42aef11..54a6d54cc03 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg index f1fc4dd8775..abdd37d98da 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg index 03c73269f8c..50f3b04e16f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg index ddf8abc4c15..35e9d199577 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg index 77eb559e6e3..6e59384a4d6 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg index 5053e91cbbf..9df5f69d750 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg index 0e658a7bd26..45b5a9e4153 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg index f30a55729cd..70ec1234ff3 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg index eca2362651c..63275020274 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg index ec460ac49e4..d7056a3f110 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg index 1e85473f67a..a5ec67621f1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg index 9650dac1c02..4ddc98ddd2f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg index 38cf5927f05..1b3a77ab8b0 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg index 60baaa10389..be45c084a56 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg index 385d21e44db..c02401c4d5f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg index ef7573779dc..ba91c749d5d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg index 86e4022a272..b1d4c72a345 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg index aa2af46845e..4fac7e687d8 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg index 915523eadf2..91b4699598a 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg index d258496552b..8d84bc4fd5d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg index 93420a5103b..eafe3eef80e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg index 41764726df3..3286e7fb083 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg index 2e4bb516b00..bb164bcd99e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg index 700c0102c22..82ad174a959 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg index 941f0a6c814..f33abf1ec39 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg index 4cd7728a694..2edb0e32f89 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg index 01b584afcda..30d7139eb91 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg index a4c6fd4046f..1bf36453d18 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg index 376c9b1d511..f413dd3e17b 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg index 5e27fec1509..9b228f7b05d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg index 5ca32bd6554..68c8604a95a 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg index bdebb9a0acc..66fc7c2f92e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg index 01c65f45865..aceba867c23 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg index 9a8aaeb18ef..a34c3a4d45e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg index ba4d2b22ec0..bd41a808d04 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg index 2b1b5fb2f92..6036150353b 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg index 6e05ba15a68..c150380c74b 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 107 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg index 56765cb1567..74ce8559d2a 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 105 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg index 36d6248682f..f59b68f675a 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg index d88ff841d05..689c1fe0764 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg index 9bb1258fc80..514cdcbfde2 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg index 7a662ec6d17..123dc9a953d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg index 767b72a5666..9c3f620a2d1 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg index da088dc345a..0b841dfb095 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg index 1ae6c25ebb7..adfe8161258 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg index a9eb8331c83..4b6108e51d2 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg index 03cb1459449..99af35534f2 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg index ac77c87265e..21043cae581 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg index 538bcfedb96..ac5f3e5bee7 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg @@ -22,8 +22,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True +prime_tower_enable = True prime_tower_flow = 110 -prime_tower_mode = normal prime_tower_size = 35 retraction_min_travel = 2 skirt_gap = 2 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg index 86c4cd18941..eca85becc64 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True +prime_tower_enable = True prime_tower_flow = 110 -prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg index 83ec5746630..8071d7193e5 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True +prime_tower_enable = True prime_tower_flow = 110 -prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg index 2269a480a5d..8354fba5e09 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True +prime_tower_enable = True prime_tower_flow = 110 -prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg index 4fed1695685..074632abda3 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True +prime_tower_enable = True prime_tower_flow = 110 -prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 632a1fb46da..eeb924906f6 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index 0667ef961d2..a64c8298a2d 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index d93ba61d9da..16be0db845c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index b92a826f5ae..916b283c9ce 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_mode = none +prime_tower_enable = False speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 2fe35f1a2eb..5dcbe80bbbb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_mode = none +prime_tower_enable = False speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index fcecc2701b5..1420880995f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_mode = none +prime_tower_enable = False speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index cf417a84b69..e0dd43cc28a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index 363a43975ee..16ece7c2dda 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index 92dae4a19f5..ca7fd8cbf35 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 2540a78b21b..5de59e58c99 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.2 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 37e8df992dc..b2020831d77 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.15 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 5ba84b05642..4be3a9c13aa 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 0fb115b5484..2e24f485d0a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index d0d447acdf5..28e8ccbf75a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index e55a49babab..5113277ab2c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index ee55427cf73..636ce41e716 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 15410514cd9..a7c533bfea7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index a79b715ee08..1d44e48193d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index a838352f48a..6b99ed5a70e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index e5a10d92227..97be45babc7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 486b74c1b20..f305caa82d7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 4293ca81f10..c82043d3afc 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_amount = 6.5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 1b396f5417e..74a628f7cb9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index 6c4ee71b828..fa9b4c54ea4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index d8fca155d38..cffd1e60758 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 20 speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 5ea9fe93369..94fe824f5e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 4e03569ca67..05a68966469 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False skin_overlap = 10 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index 0443afa3f61..dcca81f3ef2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index ccae2cc5d87..585ae8eefe2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 9596b00d339..2280a837aed 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index 4a7e29ec36a..b1f867807bd 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index 5c5b7329900..a75ae74ada6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 15 layer_height = 0.4 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index 9a48e11a7b5..c1544a00e22 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 15 layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 747730c0a73..a0fc0365660 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 40f0779369b..547ab013fb7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 03116ec10dd..b17789ad0f8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg index aab2e25ac23..3eafff9a071 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index 45ec96e0898..fe36a86948d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 layer_height = 0.4 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing = all speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg index ee92c6add79..2bba762e2df 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 layer_height = 0.3 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 84a9b9a5fba..57a830402a6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index ae59471ff3d..40f710327f1 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 2a4c093dca1..702c64bb78a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index c9e31486c0a..145389fbe4e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index e821581360c..68d54bd406b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index a5817651d80..2aa79cad795 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,9 +17,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 5e0816ef9aa..a9b7a929180 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False speed_print = 45 support_angle = 70 top_bottom_thickness = =layer_height * 6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 36e25d258a3..16e17c500ef 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index ffbc413b6ea..96dec4f1c5c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index d8f7812d75e..859eb3b33a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -23,8 +23,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index a689035132d..61ace7da80b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -23,8 +23,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index f4b61cac5d5..e45b8f2d1d5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,8 +24,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index 64ad8ff7f3b..eab1a39931e 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 2cdc81a5d94..ad1e26c7dae 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index fa2b7026a16..e5ae49b17dd 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =3*layer_height diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index d16740c8efd..38334b43587 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =2*layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg index acad5a484b3..369cbcd5630 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg index 262e4f4b549..6485844da80 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg index ad257249040..6877d9b6a22 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg index c0890c9740c..de1905e4101 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg index fbe263ab43e..ae5c9bcbc11 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg index 059d39f6c18..701a2db84d3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg index cb741764d6a..684336d1eb4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg index 3af6b9a69d2..a7a17e5f693 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg index 1526b46ba52..a3b8129ed70 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg index 999e2ce9c95..5c051039d0b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg index 42b98f5be7b..61073067fc8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg index 864421ed78b..880461bccf2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg index 2591f15abb0..5dd5e61f828 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg index ab0354f9ea7..7617b35b3b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg index 7ac2d069982..7ed1fcd2980 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg index 9968edc74c7..c9eebee8a0c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg index 0138115976a..bcd04f4b24c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg index f2a006ce6ca..278e502231a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg index 0e72f56e021..1baf43933c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg index d313f08887a..4b8f9f433b0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg index 73105ed5121..5581284de49 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg index b6eac28eb9d..30af138465b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg index 7ee4df3cacd..e5dc960d98c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg index 80a564e05a0..719adc820b4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg index 775e8420dff..3b106196f27 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg index f8448e868b9..455338a9016 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg index e561a640757..b1f5e1f19a9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg index 26cce4fcade..b5253cb0779 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg index 86d98cfd6c7..69cf85f3497 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg index 2715630b07e..397992c551e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg index 8446a7957f9..773da6d3acf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg index 8e4d4596afc..10e43b5699c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index 95f9c846090..de5e0faf2e1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg index 447b6dfee5b..c39c6d42c81 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index 49a6120c8f9..08bb2befdf4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg index 2f595d38d09..89b8386d2f9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg index 5aa2ff791b4..cc0da1a2531 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg index 170e2199be2..d4431382ddb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg index aae7ff42a23..c304f13e349 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg index 96c3513a976..854b868259c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 3a87267e373..9678ba95235 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg index 17dd1613464..c53596bc9f0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index 70b9a95dd4b..58a8a1ebb09 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg index 564b251c4b6..2870c09199b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg index 5d27f8e05e6..6f450463b9a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index b1ac45f1b05..e193aa51c33 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg index 6201f53938e..622f2030e46 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 4c9e939ccc7..09f02aa3751 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg index dc07130b6c2..3b82ebfac7b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg index cbaf3cd89a2..2fd9e5ef2c5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg index ff96a0df68a..c2d04c9bade 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg index a3d9b394b9b..caf16e5f940 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg index dc46682c392..1cd46fab48d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg index f2ea43800e4..f9ee324f336 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg index 58193faaaf2..f883fe19987 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg index 7e58326c02d..a5c059c5e6f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg index 5b33c9854fe..e7d656dcc4f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg index 6ac1edf4e92..08c1f4933b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg index 536a00cc009..c4d2894885d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg index 539a8c5a7ce..d901c6c0dd7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg index bf923543102..02798823463 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg index 138369ef63c..373d6a0b789 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg index a3935c55f7e..1feae070fcb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg index 9f7162abe09..f93f0848db1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg index 997095fcbf8..67f9cdfcf02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index 2ec19359cf5..7619fcf43da 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index 6726d34585e..b157ed198c6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index 0bf76412b20..550a26c7f86 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg index a59a80d04a3..1f706632ce9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg index c8407226819..b1437e9160e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg index 18655899918..7c3c4ff6e91 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 437fc03997b..5d6ce58f7c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 05401c0d34d..1b69ada75dc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index a77cde65e6b..d678d7e178e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg index 79f23f9c2c8..9d7b4455d6f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg index a187dc31798..e2a5c54c66d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg index cc2c57bcff5..26d3dc7fb8f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg index 9649f71775e..b1dae1cb7a9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg index a0d9dbdee79..4d4ffa00591 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg index 840008f60d5..5cc6a43e132 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg index c0719e38b3b..59f8409483d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg index 8f045a1238d..a4cdd898f1f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg index b1e8b913fdd..79dc105f863 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg index 176cfb2cb2a..a76864a1a3c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg index 404435e21b4..d3642327268 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg index 76724ad9581..02a71fa9b71 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg index b69ddd1011c..12b815d5ab9 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg index 67a101d2bc4..5390b3ecb7f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg index 66c0486b0f8..b15b5958a77 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg index 6e36d9578fc..e273e85eb50 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg index 9b81b09599d..ea2902cd6c8 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg index e596c6fcd08..bbbad9be1fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg index 5c9671c99e0..300e2ebaedb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg index 872368142ca..84040ede4ea 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg index 2b76474e5fc..402ae15ebae 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg index dc841082982..0c9154a2334 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg index 3706d834246..e7b72d6cd09 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg index 6e03ebd7e56..38c857de5e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg index dc6dc3906d4..eef6e66a5e6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg index 69a5af3102a..56689c4bfa8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg index f96f28e71f5..573b758705b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg index 9cc0a12b5a0..926ef499223 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg index 651c780d321..598e83d9222 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg index 28bd4cddfff..5f5e9e2fd3c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg index 49e70ecb1c8..8656a280676 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg index b2dd10f321b..a4381e0e3b7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg index ba704aa34b9..5f4c480fa4b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg index ccccb2d3e83..9e3c0153b17 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg index cc6e8f94535..bd4e13ebaf6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg index 0b11bc463b6..a77d1b42335 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg index 476cdad5ce2..805fb08ead6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg index 6a18d6a8590..77f775d6723 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg index dcd01b10841..877c48c42d9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg index c2d943bb775..c58107dcf9e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg index 30b18965281..b210b894e55 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg index aa58bd07b30..aa17d35a978 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg index e74d6a6532c..616443b1292 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg index e724f809d58..f34549bc781 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg index 2cce79480c1..4a9e914b99d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg index 5a730aba3a8..dc73f13bb55 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg index a1bde9d68db..ead512bb507 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg index e0070ff73ba..c6641e7a08e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg index 0f06f432d45..8eb0d257d6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg index 68aeea4c251..bd4dd317bb6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg index 2f7a70bfa07..1e5ea9efb62 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg index 2bf08e3489b..cf7a8335b86 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg index 3b44a9eb373..a7dcb611285 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg index 3167f395637..f053b33478d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg index 238468f784c..4e98b6005ae 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_mode = none +prime_tower_enable = False retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg index 208277dc9b7..5c6ed285489 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index e7d58a1001a..c0b4799ca95 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg index 20e10b3e78d..d430f867d85 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index fe37499b763..b2c25e26c70 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg index 5f85f0b6d1f..15b87d8229c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg index 7d9bd13d077..9a100248130 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg index 4673f7dddcf..5d14f014b94 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg index 7ffa9aa60ab..4e1b0f535f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg index 5cf1740ad17..ab66eed0ab2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index cc05029e749..2b192e8c1c9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg index a7bebed4727..11301a29907 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg index 4ca8ccaa86f..28cf131812b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg @@ -45,7 +45,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg index c1ea2d98dda..a01b433eb2b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index 597bf3b3026..f368ac13d87 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg index 81f4e207be8..b699ebc9f33 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index a38a73679d3..d0ee391c657 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -42,7 +42,7 @@ machine_nozzle_heat_up_speed = 1.9 material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg index f045d5425d0..9869a18bb34 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg index 79e81610472..fc8507c42b2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = none +prime_tower_enable = False raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg index a7877d90e1e..0dd369e4dd3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg index 2b5b521f025..e6ce183f4a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg index ff9a049f7e8..0c3abc6e3fc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_mode = normal +prime_tower_enable = True retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg index a3340f81a85..eb6e07e0806 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg index 7c80d16f247..e7958d98416 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg index 18ec3e9dbe0..0683b2959bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg index 798db0dfc8f..5a774e07508 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg index 86d6130a706..bed4ac46d7f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg index 2d9c3ebabe3..a0d58757da8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg index 7f51af7154c..6208ad9bec5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg index 81d08397f37..98b0d3f5f8c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg index 689455183f4..156113b809c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg index d00e5235ba9..10bf06fbb5c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg index a22439011e6..1a63005ced6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg index 7a97620cb4b..5e22cee246e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = normal +prime_tower_enable = True speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index 355e3afa786..c338c4b7ff5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index e89b5d717b8..62d9eb235d7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index 542ba0bb5b6..b2792b6feef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg index 1c5161a635b..26c20268eac 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = none +prime_tower_enable = False speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg index 0a4c4ad2c7c..cc28dc51505 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg index 2fc8aaf7462..eb338d1e1db 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_mode = none +prime_tower_enable = False speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 3deb8f57a09..2491d0ed881 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index fd30dfc228e..e975175ce09 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index 2f21317657e..5334fac1f01 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 +prime_tower_enable = True prime_tower_flow = 100 -prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg index e308015dd81..9ba4a38c6e7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg index 3d7cabe23d1..4ab74980ef0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg index f7ab03fac0a..269d51dd4b5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg index 692f4f8aa77..4f56167ffde 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg index 93e4e071f5d..9fdf9a665b1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg index 592c835689b..3368ae6e2d2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg index fd0b6da1304..ca93df9dc10 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg index a6b7ac04396..4461ae07724 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg index c873edfacb1..1acdad53a0c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg index 413903a8e88..4973ec35bbc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg index f0c51693895..2bcf3fa82d4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg index cb12b8740cd..3e4693c115f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_mode = normal +prime_tower_enable = True raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg index 022e91ed9f0..2bc28f4c1a0 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg index 40cf72eff4a..f5b8c352984 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg index 8b5a3e9f678..6457f97c9c9 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg index 1ff95a0e3b7..eef90f5f17c 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg index 58796a07a47..e1862ce3c41 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_mode = none +prime_tower_enable = False retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg index b7d9b2a05f0..8b807c1eb5f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg index e3e8d486b08..ebc58413e2a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg index f01921353b9..1204be4c15e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg index 0a1cc1204da..6a7d52af4b3 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg index 4437f2c5315..40d414cbcb6 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg index 3796177bc5f..6144a2c3f03 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg index 1ec49116767..5bf5d910e81 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg index 36b56b65130..21407b6e66a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_mode = normal +prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/variants/liquid/liquid_vo08.inst.cfg b/resources/variants/liquid/liquid_vo08.inst.cfg index a69a0f806e9..58cbea1b9db 100644 --- a/resources/variants/liquid/liquid_vo08.inst.cfg +++ b/resources/variants/liquid/liquid_vo08.inst.cfg @@ -37,7 +37,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True retract_at_layer_change = =not magic_spiralize retraction_amount = 3 diff --git a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg index b66b984346e..4bf51a967ad 100644 --- a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = HT0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False support_angle = 45 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg index 968c7c72626..3d705453d87 100644 --- a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = Standard 0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False support_angle = 60 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg index 9b6d921d704..3443f64531e 100644 --- a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.4 machine_nozzle_id = Standard 0.6 machine_nozzle_size = 0.6 machine_nozzle_tip_outer_diameter = 1.5 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = False support_angle = 55 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg index 11ff582ef16..f436ce1fe74 100644 --- a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.5 machine_nozzle_id = Standard 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg index c9d50d91c38..b957d58d9fe 100644 --- a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.6 machine_nozzle_id = Standard 1.0 Experimental machine_nozzle_size = 1.0 machine_nozzle_tip_outer_diameter = 2.5 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg index f1f03bfcb4d..3a35f9c4a20 100644 --- a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.7 machine_nozzle_id = Standard 1.2 Experimental machine_nozzle_size = 1.2 machine_nozzle_tip_outer_diameter = 3.0 -prime_tower_mode = normal +prime_tower_enable = True retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index baf5f4043a6..4190aab0cd1 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 5250dff5e92..62227f50f65 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 109cd55a9da..941634e3a61 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index c40c69ff621..2a88f165e61 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index 5385e5e540e..e7d3487503e 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 56b1ea9af79..d0f78ac3bd1 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index 4bb5eda5dba..04a3a97d115 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index b833c4bcf3a..07b556d2068 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg index 1feea8c676b..b3253f7d258 100644 --- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg index 17a99710028..010d5c7cf11 100644 --- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_mode = none +prime_tower_enable = False prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 4.5 From bb439e586775089a500de32956ee9d56a2069d1e Mon Sep 17 00:00:00 2001 From: "c.lamboo" Date: Thu, 22 Feb 2024 16:21:32 +0100 Subject: [PATCH 02/10] Introduce `primetower_enable` setting CURA-11645 --- resources/definitions/fdmprinter.def.json | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 1d453456a8e..9dbd7b19a0b 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6794,20 +6794,29 @@ "description": "Settings used for printing with multiple extruders.", "children": { + "prime_tower_enable": { + "label": "Enable Prime Tower", + "description": "Print a tower next to the print which serves to prime the material after each nozzle switch.", + "type": "bool", + "enabled": "extruders_enabled_count > 1", + "default_value": false, + "resolve": "(extruders_enabled_count > 1) and any(extruderValues('prime_tower_enable'))", + "settable_per_mesh": false, + "settable_per_extruder": false + }, "prime_tower_mode": { "label": "Prime Tower", - "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.", + "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.", "type": "enum", - "value": "'none' if (extruders_enabled_count < 2) else ('interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal')", + "value": "'interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal'", "options": { - "none": "None", "normal": "Normal", "interleaved": "Interleaved" }, - "default_value": "none", - "enabled": "extruders_enabled_count > 1", + "default_value": "normal", + "enabled": "prime_tower_enabled", "settable_per_mesh": false, "settable_per_extruder": false }, From 0a09cee0c6bda29c15b76e3074b8b043c2c4ad94 Mon Sep 17 00:00:00 2001 From: casperlamboo Date: Thu, 22 Feb 2024 15:22:31 +0000 Subject: [PATCH 03/10] Applied printer-linter format --- resources/definitions/fdmprinter.def.json | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 9dbd7b19a0b..a22a06c19fb 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6794,7 +6794,8 @@ "description": "Settings used for printing with multiple extruders.", "children": { - "prime_tower_enable": { + "prime_tower_enable": + { "label": "Enable Prime Tower", "description": "Print a tower next to the print which serves to prime the material after each nozzle switch.", "type": "bool", From d4ba499d68fca86b6ccf2e3f9beb8b0824e59207 Mon Sep 17 00:00:00 2001 From: Casper Lamboo Date: Thu, 22 Feb 2024 17:13:01 +0100 Subject: [PATCH 04/10] Update resources/definitions/fdmprinter.def.json --- resources/definitions/fdmprinter.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index a22a06c19fb..8b5a1e5e928 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6817,7 +6817,7 @@ "interleaved": "Interleaved" }, "default_value": "normal", - "enabled": "prime_tower_enabled", + "enabled": "prime_tower_enable", "settable_per_mesh": false, "settable_per_extruder": false }, From d5e8a0acb9d740296e5ee04f91b1b084afac58db Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Mon, 26 Feb 2024 11:12:31 +0100 Subject: [PATCH 05/10] Fix prime tower shadow visible when disabled CURA-11645 --- cura/BuildVolume.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 56abfc0fa15..0f906332eb1 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -880,7 +880,7 @@ def _computeDisallowedAreasPrinted(self, used_extruders): result[extruder.getId()] = [] # Currently, the only normally printed object is the prime tower. - if self._global_container_stack.getProperty("prime_tower_mode", "value") != 'none': + if self._global_container_stack.getProperty("prime_tower_enable", "value"): prime_tower_size = self._global_container_stack.getProperty("prime_tower_size", "value") machine_width = self._global_container_stack.getProperty("machine_width", "value") machine_depth = self._global_container_stack.getProperty("machine_depth", "value") From fb33dfe665778dbcf36480dd1f8f8041c42aea46 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Mon, 26 Feb 2024 11:15:34 +0100 Subject: [PATCH 06/10] Register notification on prime tower enable CURA-11645 --- cura/BuildVolume.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 0f906332eb1..742d1872cb5 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -1208,7 +1208,7 @@ def _clamp(self, value, min_value, max_value): _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_layers", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap", "layer_0_z_overlap"] _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"] _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "prime_blob_enable"] - _tower_settings = ["prime_tower_mode", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] + _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"] _distance_settings = ["infill_wipe_dist", "travel_avoid_distance", "support_offset", "support_enable", "travel_avoid_other_parts", "travel_avoid_supports", "wall_line_count", "wall_line_width_0", "wall_line_width_x"] _extruder_settings = ["support_enable", "support_bottom_enable", "support_roof_enable", "support_infill_extruder_nr", "support_extruder_nr_layer_0", "support_bottom_extruder_nr", "support_roof_extruder_nr", "brim_line_count", "skirt_brim_extruder_nr", "raft_base_extruder_nr", "raft_interface_extruder_nr", "raft_surface_extruder_nr", "adhesion_type"] #Settings that can affect which extruders are used. From af494883ccd8f20ce16efee27ca04dd5737f6bf8 Mon Sep 17 00:00:00 2001 From: Casper Lamboo Date: Mon, 26 Feb 2024 12:28:19 +0100 Subject: [PATCH 07/10] Update resources/definitions/fdmprinter.def.json Co-authored-by: Erwan MATHIEU --- resources/definitions/fdmprinter.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 8b5a1e5e928..4fac6e1d6e9 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6808,7 +6808,7 @@ "prime_tower_mode": { "label": "Prime Tower", - "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • Normal: generate a bucket in which secondary materials are primed
  • Interleaved: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", + "description": "How to generate the prime tower:
  • Normal: create a bucket in which secondary materials are primed
  • Interleaved: create a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", "type": "enum", "value": "'interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal'", "options": From caf710ff606a0fcfb1c27e6986fb0a64251d8adf Mon Sep 17 00:00:00 2001 From: "c.lamboo" Date: Tue, 27 Feb 2024 12:46:58 +0100 Subject: [PATCH 08/10] Change some left over prime tower mode -> enable CURA-11645 --- plugins/SliceInfoPlugin/SliceInfo.py | 1 + resources/definitions/fdmprinter.def.json | 30 +++++++++++------------ resources/setting_visibility/advanced.cfg | 1 + resources/setting_visibility/basic.cfg | 2 +- resources/setting_visibility/expert.cfg | 1 + 5 files changed, 19 insertions(+), 16 deletions(-) diff --git a/plugins/SliceInfoPlugin/SliceInfo.py b/plugins/SliceInfoPlugin/SliceInfo.py index f61f5cf2952..411146d0653 100755 --- a/plugins/SliceInfoPlugin/SliceInfo.py +++ b/plugins/SliceInfoPlugin/SliceInfo.py @@ -263,6 +263,7 @@ def _onWriteStarted(self, output_device): print_settings["retraction_enable"] = global_stack.getProperty("retraction_enable", "value") # Prime tower settings + print_settings["prime_tower_enable"] = global_stack.getProperty("prime_tower_enable", "value") print_settings["prime_tower_mode"] = global_stack.getProperty("prime_tower_mode", "value") # Infill settings diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 4fac6e1d6e9..92856e9613b 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -979,7 +979,7 @@ "description": "Width of a single prime tower line.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": 0.4, "value": "line_width", "minimum_value": "0.001", @@ -3363,7 +3363,7 @@ "description": "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal.", "type": "float", "unit": "mm/s", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": 60, "value": "speed_print", "minimum_value": "0.1", @@ -3741,7 +3741,7 @@ "maximum_value_warning": "10000", "default_value": 3000, "value": "acceleration_print", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('acceleration_enabled')", + "enabled": "'prime_tower_enable' and resolveOrValue('acceleration_enabled')", "settable_per_mesh": false } } @@ -4060,7 +4060,7 @@ "maximum_value_warning": "50", "default_value": 20, "value": "jerk_print", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('jerk_enabled')", + "enabled": "'prime_tower_enable' and resolveOrValue('jerk_enabled')", "settable_per_mesh": false } } @@ -6827,7 +6827,7 @@ "description": "The width of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": 20, "resolve": "max(extruderValues('prime_tower_size'))", "minimum_value": "0", @@ -6846,7 +6846,7 @@ "default_value": 6, "minimum_value": "0", "maximum_value_warning": "(resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height') - sum(extruderValues('prime_tower_min_volume')) + prime_tower_min_volume", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6859,7 +6859,7 @@ "default_value": 5, "minimum_value": "line_width", "maximum_value_warning": "10.0", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6869,7 +6869,7 @@ "description": "The x coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": 200, "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_x')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6883,7 +6883,7 @@ "description": "The y coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": 200, "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_y')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6896,7 +6896,7 @@ "label": "Wipe Inactive Nozzle on Prime Tower", "description": "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "enabled": "'prime_tower_enable'", "default_value": true, "settable_per_mesh": false, "settable_per_extruder": true @@ -6907,7 +6907,7 @@ "label": "Prime Tower Base", "description": "By enabling this setting, your prime-tower will get a brim, even if the model doesn't. If you want a sturdier base for a high tower, you can increase the base height.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('adhesion_type') != 'raft'", + "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') != 'raft'", "default_value": false, "settable_per_mesh": false, "settable_per_extruder": false @@ -6919,7 +6919,7 @@ "description": "The width of the prime tower brim/base. A larger base enhances adhesion to the build plate, but also reduces the effective print area.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 1.2, "minimum_value": "0", "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", @@ -6933,7 +6933,7 @@ "description": "The height of the prime tower base. Increasing this value will result in a more sturdy prime tower because the base will be wider. If this setting is too low, the prime tower will not have a sturdy base.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 0, "minimum_value": "0", "maximum_value": "machine_height", @@ -6945,7 +6945,7 @@ "label": "Prime Tower Base Slope", "description": "The magnitude factor used for the slope of the prime tower base. If you increase this value, the base will become slimmer. If you decrease it, the base will become thicker.", "type": "float", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 4, "minimum_value": "0", "maximum_value": "10", @@ -6963,7 +6963,7 @@ "minimum_value": "0", "minimum_value_warning": "raft_base_line_width", "maximum_value_warning": "100", - "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('adhesion_type') == 'raft'", + "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, "limit_to_extruder": "raft_base_extruder_nr" diff --git a/resources/setting_visibility/advanced.cfg b/resources/setting_visibility/advanced.cfg index 57698bf252c..55a36075be6 100644 --- a/resources/setting_visibility/advanced.cfg +++ b/resources/setting_visibility/advanced.cfg @@ -127,6 +127,7 @@ brim_line_count brim_outside_only [dual] +prime_tower_enable prime_tower_mode prime_tower_position_x prime_tower_position_y diff --git a/resources/setting_visibility/basic.cfg b/resources/setting_visibility/basic.cfg index f5552f3cd88..0193eb26ba7 100644 --- a/resources/setting_visibility/basic.cfg +++ b/resources/setting_visibility/basic.cfg @@ -53,7 +53,7 @@ adhesion_type adhesion_extruder_nr [dual] -prime_tower_mode +prime_tower_enable prime_tower_position_x prime_tower_position_y diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index 0a07fff4492..130b2580a4e 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -356,6 +356,7 @@ raft_fan_speed raft_is_shrink_plate [dual] +prime_tower_enable prime_tower_mode prime_tower_size prime_tower_min_volume From 85a82ea986c91ab4b88551dc2d15a497ffb6122d Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Tue, 27 Feb 2024 12:57:38 +0100 Subject: [PATCH 09/10] Fix prime_tower_enable setting use CURA-11645 --- resources/definitions/fdmprinter.def.json | 30 +++++++++++------------ 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 92856e9613b..2cea608c338 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -979,7 +979,7 @@ "description": "Width of a single prime tower line.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": 0.4, "value": "line_width", "minimum_value": "0.001", @@ -3363,7 +3363,7 @@ "description": "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal.", "type": "float", "unit": "mm/s", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": 60, "value": "speed_print", "minimum_value": "0.1", @@ -3741,7 +3741,7 @@ "maximum_value_warning": "10000", "default_value": 3000, "value": "acceleration_print", - "enabled": "'prime_tower_enable' and resolveOrValue('acceleration_enabled')", + "enabled": "prime_tower_enable and resolveOrValue('acceleration_enabled')", "settable_per_mesh": false } } @@ -4060,7 +4060,7 @@ "maximum_value_warning": "50", "default_value": 20, "value": "jerk_print", - "enabled": "'prime_tower_enable' and resolveOrValue('jerk_enabled')", + "enabled": "prime_tower_enable and resolveOrValue('jerk_enabled')", "settable_per_mesh": false } } @@ -6827,7 +6827,7 @@ "description": "The width of the prime tower.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": 20, "resolve": "max(extruderValues('prime_tower_size'))", "minimum_value": "0", @@ -6846,7 +6846,7 @@ "default_value": 6, "minimum_value": "0", "maximum_value_warning": "(resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height') - sum(extruderValues('prime_tower_min_volume')) + prime_tower_min_volume", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6859,7 +6859,7 @@ "default_value": 5, "minimum_value": "line_width", "maximum_value_warning": "10.0", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6869,7 +6869,7 @@ "description": "The x coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": 200, "value": "(resolveOrValue('machine_width') / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (resolveOrValue('machine_width') - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_x')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (resolveOrValue('machine_width') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_width / 2 if machine_center_is_zero else machine_width) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6883,7 +6883,7 @@ "description": "The y coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": 200, "value": "machine_depth - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('machine_nozzle_offset_y')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (resolveOrValue('machine_depth') / 2 if resolveOrValue('machine_center_is_zero') else 0)", "maximum_value": "(machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')) - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0)", @@ -6896,7 +6896,7 @@ "label": "Wipe Inactive Nozzle on Prime Tower", "description": "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower.", "type": "bool", - "enabled": "'prime_tower_enable'", + "enabled": "prime_tower_enable", "default_value": true, "settable_per_mesh": false, "settable_per_extruder": true @@ -6907,7 +6907,7 @@ "label": "Prime Tower Base", "description": "By enabling this setting, your prime-tower will get a brim, even if the model doesn't. If you want a sturdier base for a high tower, you can increase the base height.", "type": "bool", - "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') != 'raft'", + "enabled": "prime_tower_enable and resolveOrValue('adhesion_type') != 'raft'", "default_value": false, "settable_per_mesh": false, "settable_per_extruder": false @@ -6919,7 +6919,7 @@ "description": "The width of the prime tower brim/base. A larger base enhances adhesion to the build plate, but also reduces the effective print area.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 1.2, "minimum_value": "0", "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", @@ -6933,7 +6933,7 @@ "description": "The height of the prime tower base. Increasing this value will result in a more sturdy prime tower because the base will be wider. If this setting is too low, the prime tower will not have a sturdy base.", "type": "float", "unit": "mm", - "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 0, "minimum_value": "0", "maximum_value": "machine_height", @@ -6945,7 +6945,7 @@ "label": "Prime Tower Base Slope", "description": "The magnitude factor used for the slope of the prime tower base. If you increase this value, the base will become slimmer. If you decrease it, the base will become thicker.", "type": "float", - "enabled": "'prime_tower_enable' and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", + "enabled": "prime_tower_enable and (resolveOrValue('prime_tower_brim_enable') or resolveOrValue('adhesion_type') == 'raft')", "default_value": 4, "minimum_value": "0", "maximum_value": "10", @@ -6963,7 +6963,7 @@ "minimum_value": "0", "minimum_value_warning": "raft_base_line_width", "maximum_value_warning": "100", - "enabled": "'prime_tower_enable' and resolveOrValue('adhesion_type') == 'raft'", + "enabled": "prime_tower_enable and resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, "limit_to_extruder": "raft_base_extruder_nr" From 98becc9f25c901565eef3250c108caa0152cf29c Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Tue, 27 Feb 2024 13:02:46 +0100 Subject: [PATCH 10/10] Minor prime tower setting wording CURA-11645 --- resources/definitions/fdmprinter.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 2cea608c338..1db28b289cc 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6807,7 +6807,7 @@ }, "prime_tower_mode": { - "label": "Prime Tower", + "label": "Prime Tower Type", "description": "How to generate the prime tower:
  • Normal: create a bucket in which secondary materials are primed
  • Interleaved: create a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", "type": "enum", "value": "'interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal'",