From 2d82bb94abc92d5ff2e4e0a60e307d44d5cbd8b2 Mon Sep 17 00:00:00 2001 From: Paul Kuiper <46715907+pkuiper-ultimaker@users.noreply.github.com> Date: Thu, 8 Feb 2024 16:20:02 +0100 Subject: [PATCH] Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands. It also cleans up the settings. PP-389 --- resources/definitions/ultimaker.def.json | 1 + resources/definitions/ultimaker3.def.json | 1 - resources/definitions/ultimaker_method_base.def.json | 1 - resources/definitions/ultimaker_s3.def.json | 1 - resources/definitions/ultimaker_s5.def.json | 1 - resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg | 1 - resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg | 1 - resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg | 1 - resources/variants/ultimaker_s3_aa0.25.inst.cfg | 1 - resources/variants/ultimaker_s3_aa0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_aa04.inst.cfg | 1 - resources/variants/ultimaker_s3_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s3_bb04.inst.cfg | 1 - resources/variants/ultimaker_s3_cc04.inst.cfg | 1 - resources/variants/ultimaker_s3_cc06.inst.cfg | 1 - resources/variants/ultimaker_s5_aa0.25.inst.cfg | 1 - resources/variants/ultimaker_s5_aa0.8.inst.cfg | 1 - resources/variants/ultimaker_s5_aa04.inst.cfg | 1 - resources/variants/ultimaker_s5_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s5_bb04.inst.cfg | 1 - resources/variants/ultimaker_s5_cc04.inst.cfg | 1 - resources/variants/ultimaker_s5_cc06.inst.cfg | 1 - resources/variants/ultimaker_s7_aa0.25.inst.cfg | 1 - resources/variants/ultimaker_s7_aa0.8.inst.cfg | 1 - resources/variants/ultimaker_s7_aa04.inst.cfg | 1 - resources/variants/ultimaker_s7_bb0.8.inst.cfg | 1 - resources/variants/ultimaker_s7_bb04.inst.cfg | 1 - resources/variants/ultimaker_s7_cc04.inst.cfg | 1 - resources/variants/ultimaker_s7_cc06.inst.cfg | 1 - 64 files changed, 1 insertion(+), 63 deletions(-) diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json index 1669dd5e000..dae64cea6bc 100644 --- a/resources/definitions/ultimaker.def.json +++ b/resources/definitions/ultimaker.def.json @@ -106,6 +106,7 @@ "retraction_combing_max_distance": { "value": 15 }, "retraction_count_max": { "value": 25 }, "retraction_extrusion_window": { "value": 1 }, + "retraction_min_travel": { "value": 5 }, "roofing_layer_count": { "value": "1" }, "roofing_material_flow": { "value": "material_flow" }, "skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 19df92c08d7..17a4b6045e1 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -156,7 +156,6 @@ "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, - "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, "speed_prime_tower": { "value": "speed_topbottom" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index f0808c529e5..6e40f0bbf1b 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -373,7 +373,6 @@ "retraction_hop": { "value": 0.4 }, "retraction_hop_enabled": { "value": true }, "retraction_hop_only_when_collides": { "value": false }, - "retraction_min_travel": { "value": "line_width * 4" }, "retraction_prime_speed": { "value": "retraction_speed" }, "retraction_speed": { "value": 5 }, "roofing_layer_count": { "value": 2 }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index add1782368e..483825df5a3 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -108,7 +108,6 @@ "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, - "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "retraction_speed": { "value": "45" }, "speed_prime_tower": { "value": "speed_topbottom" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index ec82e6b630b..cd48c4fd38c 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -110,7 +110,6 @@ "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, "retraction_hop_only_when_collides": { "value": "True" }, - "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "retraction_speed": { "value": "45" }, "speed_prime_tower": { "value": "speed_topbottom" }, diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg index c6d99b63b59..e0d3aa4d50f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_nylon_0.1mm.inst.cfg @@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 ooze_shield_angle = 40 raft_airgap = 0.4 -retraction_min_travel = 5 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg index ec864943979..369cbcd5630 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg index 77082932a57..6485844da80 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.2 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 retraction_prime_speed = 15 speed_print = 25 speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg index f46f816cfbc..c9eebee8a0c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg @@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg index 2c234493733..bcd04f4b24c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg index e0899c8dc2b..278e502231a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg @@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg index 329bd095d58..1baf43933c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg index eee8fc31b60..3b106196f27 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg index fa878257185..455338a9016 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg @@ -29,7 +29,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg index 6c90ec685f7..b1f5e1f19a9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg @@ -29,7 +29,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg index 15018203e9f..601886a065d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.15mm.inst.cfg @@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg index 1b9912c1d62..bb303eeb339 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.1mm.inst.cfg @@ -29,7 +29,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg index 971cee7b3a7..85c37d439dc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tpu_0.2mm.inst.cfg @@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index 163f32a36da..7619fcf43da 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 10 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index 3f75c3366e8..b157ed198c6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 15 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index b2c5dab3c45..550a26c7f86 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 20 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_infill = =math.ceil(speed_wall * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 75949f45aa3..5d6ce58f7c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -27,7 +27,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 034bda5d09e..1b69ada75dc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index e7189d54674..d678d7e178e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -27,7 +27,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_infill = =speed_print speed_print = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg index 38267fcf24a..ea86a9a9a6e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_nylon_0.1mm.inst.cfg @@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 ooze_shield_angle = 40 raft_airgap = 0.4 -retraction_min_travel = 5 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg index 57791421620..eef6e66a5e6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg index 64b1be79aa9..56689c4bfa8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.2 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 retraction_prime_speed = 15 speed_print = 25 speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg index 0b471a8c75b..c58107dcf9e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg @@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg index 6c9710e4362..b210b894e55 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg index 945b77e6996..aa17d35a978 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg @@ -26,7 +26,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg index b523e3c6466..616443b1292 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg @@ -25,7 +25,6 @@ prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg index 85e892628d5..8eb0d257d6f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg index 531f946ba81..bd4dd317bb6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg @@ -29,7 +29,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg index a7f63a76b12..1e5ea9efb62 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg @@ -29,7 +29,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) speed_wall = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg index 0b69ae0c439..db01865cf87 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.15mm.inst.cfg @@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg index 29aa42a4369..27a8bb863bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.1mm.inst.cfg @@ -29,7 +29,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg index 48e6ffb81be..cf3069ee0f0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tpu_0.2mm.inst.cfg @@ -28,7 +28,6 @@ prime_tower_wipe_enabled = True retraction_count_max = 15 retraction_extra_prime_amount = 0.8 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 0.8) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index 149104700e3..c338c4b7ff5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 10 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index 670ec78d512..62d9eb235d7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 15 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_wall_x = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index c9b5c26d64b..b2792b6feef 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -24,7 +24,6 @@ prime_tower_min_volume = 20 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 -retraction_min_travel = 1.5 retraction_prime_speed = 15 speed_infill = =math.ceil(speed_wall * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 43436cd4c73..2491d0ed881 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -27,7 +27,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index 58b524dd2a1..e975175ce09 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -28,7 +28,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index d17ec5486a2..5334fac1f01 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -27,7 +27,6 @@ retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = =line_width * 2 speed_infill = =speed_print speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg index 1f3baa432fa..97b303035c2 100644 --- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg @@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 -retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed speed_print = 55 speed_topbottom = 20 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index c30365897b4..e7d3487503e 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -29,7 +29,6 @@ raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 retraction_speed = 25 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg index b3f76758f4b..76992b58052 100644 --- a/resources/variants/ultimaker_s3_aa04.inst.cfg +++ b/resources/variants/ultimaker_s3_aa04.inst.cfg @@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_amount = 6.5 -retraction_min_travel = =line_width * 2 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 34e1b6d3083..d0f78ac3bd1 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -30,7 +30,6 @@ prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 3 speed_prime_tower = =math.ceil(speed_print * 7 / 35) speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg index e50241aa3ab..4e232cbb5e1 100644 --- a/resources/variants/ultimaker_s3_bb04.inst.cfg +++ b/resources/variants/ultimaker_s3_bb04.inst.cfg @@ -16,7 +16,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -retraction_min_travel = =3 * line_width speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg index 19192bfba69..38f04547aa7 100644 --- a/resources/variants/ultimaker_s3_cc04.inst.cfg +++ b/resources/variants/ultimaker_s3_cc04.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.4 machine_nozzle_size = 0.4 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45 diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg index 925a9f68d60..e42817e8f8b 100644 --- a/resources/variants/ultimaker_s3_cc06.inst.cfg +++ b/resources/variants/ultimaker_s3_cc06.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.6 machine_nozzle_size = 0.6 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45 diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg index 519b21c9206..08ed6132f59 100644 --- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg @@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 -retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed speed_print = 55 speed_topbottom = 20 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index b482c418f06..04a3a97d115 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -29,7 +29,6 @@ raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 retraction_speed = 25 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg index 09f528162d4..fd4f1ff7789 100644 --- a/resources/variants/ultimaker_s5_aa04.inst.cfg +++ b/resources/variants/ultimaker_s5_aa04.inst.cfg @@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_amount = 6.5 -retraction_min_travel = =line_width * 2 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 660a6b10f48..07b556d2068 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -30,7 +30,6 @@ prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 3 speed_prime_tower = =math.ceil(speed_print * 7 / 35) speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg index 2058185bb84..7959fc75c2a 100644 --- a/resources/variants/ultimaker_s5_bb04.inst.cfg +++ b/resources/variants/ultimaker_s5_bb04.inst.cfg @@ -16,7 +16,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000) machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 -retraction_min_travel = =3 * line_width speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg index ef64dc0ae47..5510d0126fc 100644 --- a/resources/variants/ultimaker_s5_cc04.inst.cfg +++ b/resources/variants/ultimaker_s5_cc04.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.4 machine_nozzle_size = 0.4 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45 diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg index ba33bab17bd..a49c790e4f1 100644 --- a/resources/variants/ultimaker_s5_cc06.inst.cfg +++ b/resources/variants/ultimaker_s5_cc06.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.6 machine_nozzle_size = 0.6 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45 diff --git a/resources/variants/ultimaker_s7_aa0.25.inst.cfg b/resources/variants/ultimaker_s7_aa0.25.inst.cfg index 1495af6c480..fc1bdcfef2a 100644 --- a/resources/variants/ultimaker_s7_aa0.25.inst.cfg +++ b/resources/variants/ultimaker_s7_aa0.25.inst.cfg @@ -16,7 +16,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = AA 0.25 machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.65 -retraction_min_travel = 0.7 retraction_prime_speed = =retraction_speed speed_print = 55 speed_topbottom = 20 diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg index a5b6a665165..b3253f7d258 100644 --- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg @@ -29,7 +29,6 @@ raft_surface_layers = 1 retraction_amount = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 2 retraction_speed = 25 speed_print = 35 speed_topbottom = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s7_aa04.inst.cfg b/resources/variants/ultimaker_s7_aa04.inst.cfg index a9079c975ec..6aee6597e00 100644 --- a/resources/variants/ultimaker_s7_aa04.inst.cfg +++ b/resources/variants/ultimaker_s7_aa04.inst.cfg @@ -14,7 +14,6 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = AA 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_amount = 6.5 -retraction_min_travel = =line_width * 2 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg index 6823fe18a4e..010d5c7cf11 100644 --- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg @@ -31,7 +31,6 @@ raft_surface_layers = 1 retraction_amount = 4.5 retraction_hop = 2 retraction_hop_only_when_collides = True -retraction_min_travel = =line_width * 3 speed_prime_tower = =math.ceil(speed_print * 7 / 35) speed_print = 35 speed_support = =math.ceil(speed_print * 25 / 35) diff --git a/resources/variants/ultimaker_s7_bb04.inst.cfg b/resources/variants/ultimaker_s7_bb04.inst.cfg index bead299de34..1ec0dfab981 100644 --- a/resources/variants/ultimaker_s7_bb04.inst.cfg +++ b/resources/variants/ultimaker_s7_bb04.inst.cfg @@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.5 machine_nozzle_id = BB 0.4 machine_nozzle_tip_outer_diameter = 1.0 retraction_amount = 4.5 -retraction_min_travel = =3 * line_width speed_prime_tower = =math.ceil(speed_print * 10 / 35) speed_support = =math.ceil(speed_print * 25 / 35) speed_support_interface = =math.ceil(speed_support * 20 / 25) diff --git a/resources/variants/ultimaker_s7_cc04.inst.cfg b/resources/variants/ultimaker_s7_cc04.inst.cfg index d46d3873301..6949c5be74d 100644 --- a/resources/variants/ultimaker_s7_cc04.inst.cfg +++ b/resources/variants/ultimaker_s7_cc04.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.4 machine_nozzle_size = 0.4 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45 diff --git a/resources/variants/ultimaker_s7_cc06.inst.cfg b/resources/variants/ultimaker_s7_cc06.inst.cfg index d0c0d3670fa..576701fc2b8 100644 --- a/resources/variants/ultimaker_s7_cc06.inst.cfg +++ b/resources/variants/ultimaker_s7_cc06.inst.cfg @@ -13,7 +13,6 @@ brim_width = 7 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_id = CC 0.6 machine_nozzle_size = 0.6 -retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed speed_infill = =speed_print speed_print = 45