HPC-Stack Documentation

docs/Makefile

@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)

docs/README

@@ -0,0 +1,15 @@
+To build html docs:
+
+From the docs directory:
+
+make clean && sphinx-build -b html source build
+
+OR simply run: 
+
+make html
+
+Sphinx uses Latex to export the documentation as a PDF file. To build pdf run:
+
+make latexpdf
+
+It will generate a PDF file in ./build/latex/<sphinx-project-name>.pdf

docs/make.bat

@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.https://www.sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd

docs/requirements.txt

@@ -0,0 +1,2 @@
+sphinxcontrib-bibtex
+sphinx_rtd_theme

docs/source/_templates/conf.py

@@ -0,0 +1,111 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+import os
+import sys
+sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'HPC-Stack Users Guide'
+copyright = '2022, EMC/EPIC'
+author = 'EMC/EPIC'
+
+# The short X.Y version
+version = ''
+# The full version, including alpha/beta/rc tags
+release = ''
+
+numfig = True
+
+
+# -- General configuration ---------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.doctest',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.todo',
+    'sphinx.ext.coverage',
+    'sphinx.ext.mathjax',
+    'sphinx.ext.ifconfig',
+    'sphinx.ext.viewcode',
+    'sphinx.ext.githubpages',
+    'sphinx.ext.napoleon',
+    'sphinxcontrib.bibtex'
+]
+
+bibtex_bibfiles = ['references.bib']
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = 'en'
+
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'sphinx_rtd_theme'
+html_theme_path = ["_themes", ]
+
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+html_theme_options = {"body_max_width": "none"}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+html_context = {
+    'css_files': [
+        '_static/theme_overrides.css',  # override wide tables in RTD theme
+        ],
+     }
+
+def setup(app):
+    app.add_css_file('custom.css')  # may also be an URL
+

docs/source/conf.py

@@ -0,0 +1,209 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+import os
+import sys
+sys.path.insert(0, os.path.abspath('.'))
+
+# -- Project information -----------------------------------------------------
+
+project = 'HPC-Stack Users Guide'
+copyright = '2022, EMC/EPIC'
+author = 'EMC/EPIC'
+
+# The short X.Y version
+version = ''
+# The full version, including alpha/beta/rc tags
+release = ''
+
+numfig = True
+
+
+# -- General configuration ---------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.doctest',
+    'sphinx.ext.intersphinx',
+    'sphinx.ext.todo',
+    'sphinx.ext.coverage',
+    'sphinx.ext.mathjax',
+    'sphinx.ext.ifconfig',
+    'sphinx.ext.viewcode',
+    'sphinx.ext.githubpages',
+    'sphinx.ext.napoleon',
+    'sphinx_rtd_theme',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = 'en'
+
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'sphinx_rtd_theme'
+html_theme_path = ["_themes", ]
+
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+html_theme_options = {"body_max_width": "none"}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+#html_static_path = ['_static']
+html_static_path = []
+
+html_context = {}
+
+def setup(app):
+    app.add_css_file('custom.css')  # may also be an URL
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'HPC-Stack Help'
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_engine = 'pdflatex'
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+      'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+      'pointsize': '11pt',
+
+    # Additional stuff for the LaTeX preamble.
+      'preamble': r'''
+        \usepackage{charter}
+        \usepackage[defaultsans]{lato}
+        \usepackage{inconsolata}
+    ''',
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'HPC-Stack.tex', 'HPC-Stack Users Guide',
+     ' ', 'manual'),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'HPC-Stack', 'HPC-Stack Users Guide',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'HPC-Stack', 'HPC-Stack Users Guide',
+     author, 'HPC-Stack', 'How to build and run the HPC-Stack',
+     'Miscellaneous'),
+]
+
+
+# -- Options for Epub output -------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#
+# epub_identifier = ''
+
+# A unique identification for the text.
+#
+# epub_uid = ''
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+
+# -- Extension configuration -------------------------------------------------
+
+# -- Options for intersphinx extension ---------------------------------------
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {'https://docs.python.org/': None}
+#intersphinx_mapping = {
+#    'rtd': ('https://docs.readthedocs.io/en/stable/', None),
+#    'sphinx': ('https://www.sphinx-doc.org/en/master/', None),
+#}
+#intersphinx_disabled_domains = ['std']
+
+
+# -- Options for todo extension ----------------------------------------------
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = True