diff --git a/keyboards/bm80/bm80.c b/keyboards/bm80/bm80.c new file mode 100644 index 000000000000..4060460805fb --- /dev/null +++ b/keyboards/bm80/bm80.c @@ -0,0 +1,74 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bm80.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 0, 1, 2, 3, 4, 5, NO_LED, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 }, + { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 }, + { 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49 }, + { 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, NO_LED, NO_LED, NO_LED }, + { 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, NO_LED, 76, NO_LED, NO_LED, 77, NO_LED }, + { 78, 79, 80, NO_LED, NO_LED, 81, NO_LED, NO_LED, NO_LED, 82, 83, 84, 85, 86, NO_LED, 87, 88 } +}, { + // LED Index to Physical Position + { 7, 5 }, { 31, 5 }, { 43, 5 }, { 55, 5 }, { 67, 5 }, { 85, 5 }, { 97, 5 }, { 109, 5 }, { 121, 5 }, { 139, 5 }, { 151, 5 }, { 163, 5 }, { 175, 5 }, { 193, 5 }, { 205, 5 }, { 217, 5 }, + { 7, 20 }, { 19, 20 }, { 31, 20 }, { 43, 20 }, { 55, 20 }, { 67, 20 }, { 79, 20 }, { 91, 20 }, { 103, 20 }, { 115, 20 }, { 127, 20 }, { 139, 20 }, { 151, 20 }, { 169, 20 }, { 193, 20 }, { 205, 20 }, { 217, 20 }, + { 10, 30 }, { 25, 30 }, { 37, 30 }, { 49, 30 }, { 61, 30 }, { 73, 30 }, { 85, 30 }, { 97, 30 }, { 109, 30 }, { 121, 30 }, { 133, 30 }, { 145, 30 }, { 157, 30 }, { 172, 30 }, { 193, 30 }, { 205, 30 }, { 217, 30 }, + { 3, 39 }, + { 11, 39 }, { 28, 39 }, { 40, 39 }, { 52, 39 }, { 64, 39 }, { 76, 39 }, { 88, 39 }, { 100, 39 }, { 112, 39 }, { 124, 39 }, { 136, 39 }, { 148, 39 }, { 168, 39 }, + { 14, 49 }, { 34, 49 }, { 46, 49 }, { 58, 49 }, { 70, 49 }, { 82, 49 }, { 94, 49 }, { 106, 49 }, { 118, 49 }, { 130, 49 }, { 142, 49 }, { 165, 49 }, { 205, 49 }, + { 8, 59 }, { 23, 59 }, { 38, 59 }, { 83, 59 }, { 129, 59 }, { 144, 59 }, { 159, 59 }, { 174, 59 }, { 193, 59 }, { 205, 59 }, { 217, 59 } +}, { + // LED Index to Flag + 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 1, 9, 1, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, + 8, + 9, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1 +} }; + +/* +HAS_FLAGS(bits, flags) +n/a +Evaluates to true if bits has all flags set +HAS_ANY_FLAGS(bits, flags) +n/a +Evaluates to true if bits has any flags set +LED_FLAG_NONE +0x00 +If this LED has no flags +LED_FLAG_ALL +0xFF +If this LED has all flags +LED_FLAG_MODIFIER +0x01 +If the LED is on a modifier key +LED_FLAG_UNDERGLOW +0x02 +If the LED is for underglow +LED_FLAG_KEYLIGHT +0x04 +If the LED is for key backlight +LED_FLAG_INDICATOR +0x08 +If the LED is for keyboard state indication +*/ +#endif diff --git a/keyboards/bm80/bm80.h b/keyboards/bm80/bm80.h new file mode 100644 index 000000000000..450befe882dd --- /dev/null +++ b/keyboards/bm80/bm80.h @@ -0,0 +1,43 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_tkl_ansi( \ + K0_0, K0_2, K0_3, K0_4, K0_5, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K3_C, K0_D, K0_E, K0_F, K0_10, \ + K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10, \ + K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10, \ + K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_D, \ + K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, K4_C, K4_F, \ + K5_0, K5_1, K5_2, K5_5, K5_9, K5_A, K5_B, K5_C, K5_D, K5_F, K5_10 \ +) { \ + { K0_0, KC_NO, K0_2, K0_3, K0_4, K0_5, KC_NO, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K0_D, K0_E, K0_F, K0_10 }, \ + { K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10 }, \ + { K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10 }, \ + { K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_C, K3_D, KC_NO, KC_NO, KC_NO }, \ + { K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, KC_NO, K4_C, KC_NO, KC_NO, K4_F, KC_NO }, \ + { K5_0, K5_1, K5_2, KC_NO, KC_NO, K5_5, KC_NO, KC_NO, KC_NO, K5_9, K5_A, K5_B, K5_C, K5_D, KC_NO, K5_F, K5_10 } \ +} diff --git a/keyboards/bm80/config.h b/keyboards/bm80/config.h new file mode 100644 index 000000000000..4ae52798ae26 --- /dev/null +++ b/keyboards/bm80/config.h @@ -0,0 +1,157 @@ +/* +Copyright 2021 peepeetee + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 //KP +#define PRODUCT_ID 0xEF83 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KPRepublic +#define PRODUCT BM80HSRGB + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B3, \ + B2, \ + B1, \ + B0, \ + C6, \ + C7 } +#define MATRIX_COL_PINS { F0, F1, F4, D7, D6, D4, D5, D3, D2, F5, F6, F7, D1, D0, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN E2 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 89 + +#ifdef RGB_DI_PIN +# define RGBLED_NUM 89 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/bm80/info.json b/keyboards/bm80/info.json new file mode 100644 index 000000000000..fe0182302810 --- /dev/null +++ b/keyboards/bm80/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "bm80", + "url": "", + "maintainer": "peepeetee", + "width": 3, + "height": 2, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "k00", "x": 0, "y": 0}, + {"label": "k01", "x": 1, "y": 0}, + {"label": "k02", "x": 2, "y": 0}, + + {"label": "k10", "x": 0, "y": 1, "w": 1.5}, + {"label": "k12", "x": 1.5, "y": 1, "w": 1.5} + ] + } + } +} diff --git a/keyboards/bm80/keymaps/default/keymap.c b/keyboards/bm80/keymaps/default/keymap.c new file mode 100644 index 000000000000..d86c6f9ec8d8 --- /dev/null +++ b/keyboards/bm80/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +/* + [X] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +*/ + + +}; + diff --git a/keyboards/bm80/keymaps/default/readme.md b/keyboards/bm80/keymaps/default/readme.md new file mode 100644 index 000000000000..8ad360ebda28 --- /dev/null +++ b/keyboards/bm80/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bm80 diff --git a/keyboards/bm80/readme.md b/keyboards/bm80/readme.md new file mode 100644 index 000000000000..721c1676873b --- /dev/null +++ b/keyboards/bm80/readme.md @@ -0,0 +1,19 @@ +# bm80 + +![bm80](imgur.com image replace me!) + +*A short description of the keyboard/project* + +* Keyboard Maintainer: [peepeetee](https://github.com/yourusername) +* Hardware Supported: *The PCBs, controllers supported* +* Hardware Availability: *Links to where you can find this hardware* + +Make example for this keyboard (after setting up your build environment): + + make bm80:default + +Flashing example for this keyboard: + + make bm80:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bm80/rules.mk b/keyboards/bm80/rules.mk new file mode 100644 index 000000000000..07a17c7b8073 --- /dev/null +++ b/keyboards/bm80/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +LTO_ENABLE = yes + +LAYOUTS = tkl_ansi