IKEA Controller stopped working after update to Zigbee2MQTT 2.0.0

[CHoerby]

IKEA Controller stopped working after update to Zigbee2MQTT 2.0.0

refer to
https://github.com/Koenkk/zigbee2mqtt/releases/tag/2.0.0

this concerns e.g.:
Controller - IKEA E2001/E2002 STYRBAR Remote control
Controller - IKEA E1743 TRÅDFRI On/Off Switch & Dimmer

Solution
but as far as I understand just temporary:

All action sensors are now disabled by default (sensor.*_action entities). It's recommended to use the MQTT device trigger instead. In case you really need the action sensors, add the following to your [Zigbee2MQTT] configuration.yaml.

homeassistant:
   legacy_action_sensor: true

see /Koenkk/zigbee2mqtt#24198 (comment)

Just for reference/Notes:

also found so far:
Koenkk/zigbee2mqtt#24198 (comment)
Koenkk/zigbee2mqtt#24198 (comment)
Koenkk/zigbee2mqtt#24198 (comment)

sorry - even after using HA intensive - I have no idea, what's going on there

[CHoerby]

Probably the solution is here:

https://www.zigbee2mqtt.io/guide/usage/integrations/home_assistant.html#via-mqtt-device-trigger-recommended

- alias: Respond to button click
  triggers:
      - trigger: device
        domain: mqtt
        device_id: ad44cabee4c646f493814306aa6446e1
        type: action
        subtype: arrow_left_click
  actions:
      - action: light.toggle
        target:
            entity_id: light.bedroom

[helpfinder]

Hi there,
I am also using this blueprint with IKEA E2001/E2002 STYRBAR Remote control
After Zigbee2MQTT 2.0 update the button does not control the LED stripe as it did last few years

To above said > isn´t reason for this Blueprint to avoid such manual yaml configuration like described (and recommanded) via device trigger?

I am still waiting if there is any other solution for this?
Or any tested configuration which will make the blueprint working as before?

Maybe @EPMatt could provide some feedback?

[CHoerby]

This a fork of original repository which has some updates to work with z2m 2.x.

I'm confident, that next weeks, there will be further updates.

btw.:
my both IKEA motion sensors (old ones) decided to stop working with half battery at the time of the HA & Z2M Update ... Coincidence!?

[yarafie]

This a fork of original repository which has some updates to work with z2m 2.x.

I'm confident, that next weeks, there will be further updates.

btw.: my both IKEA motion sensors (old ones) decided to stop working with half battery at the time of the HA & Z2M Update ... Coincidence!?

I know. I am the one who contributed to that fork to update the controllers (ikea and sonoff) to add support for z2m 2.x :)

[GamesBondNL]

Thanks yarafie! Hope all the forks can be merged into a combined effort in the future :)

[helpfinder]

This a fork of original repository which has some updates to work with z2m 2.x.

I'm confident, that next weeks, there will be further updates.

btw.: my both IKEA motion sensors (old ones) decided to stop working with half battery at the time of the HA & Z2M Update ... Coincidence!?

I know it is a fork. I just wanted to mention that for my setup all is working with yaml from 2024-12-07, but is not working with your latest (the one from December contains ZIGBEE2MQTT V2, but the current one does not)

[yarafie]

We are working to merge the repositories,
All blueprints have been updated to work with zigbee2mqtt version 2.x as well as old zigbee2mqtt 1.x
Testing will be needed of course.

[yarafie]

Ive updated all blueprints in my fork yarafie/awesome-ha-blueprints to work with z2m 2.0.0 MQTT triggers
This is a breaking change as the old legacy entity triggers have been removed from the blueprints so if you download the controllers or hook blueprints again you will have to redo your automations.

These are also untested so use with caution.

Just also waiting for EPMatt so I can start merging into his repo.

[quodo]

I am using a Sonoff Zigbee 3.0 USB Dongle Plus - ZBDongle-E with this firmware
ncp-uart-hw-v7.4.5.0-zbdonglee-115200.gbl from https://github.com/darkxst/silabs-firmware-builder/tree/main/firmware_builds/zbdonglee.

Hm, I just changed the firmware four days ago to go from ezsp to ember. I chose this file because I read to get the ncp-uart-hw- file for the “Sonoff ZBDongle-E”, this was the latest in version 7, and the youtube example used 115200 as well (but I don't know why), however, I don't really know what I'm doing...

I'm not 100% sure it worked well with Home Assistant 2024.x and the ember protocol.

As a test I have a Sonoff SNZB-01 Wireless switch, a button with single press, double press and long press. I grouped all my lights and the control outlet in one zigbee group and made an automation that they're all turned on with a single press and turned off with a double press. That works. No errors.

[yarafie]

I don't think I can help with this problem.
I suggest you check on both the silabs and the zigbee2mqtt forums, I seem to recall reading something about a similar issue on one of these.

How do you havs the Dongle connected? I hope with a USB Cable with the dongle far from the system

[quodo]

I don't think I can help with this problem.

You did help, you pointed me to a direction to try to find a solution.
Edit: I'll try to update the firmware on the dongle tomorrow: Koenkk/zigbee2mqtt#24249 (comment)

How do you havs the Dongle connected? I hope with a USB Cable with the dongle far from the system

Indeed with a USB cable, though not really far from the system (HA on a Raspberry Pi, with an SSD on the USB2 port) and the WiFi router. I did change the Zigbee channel to 25 and set up the WiFi 'elsewhere' according to
https://www.metageek.com/training/resources/zigbee-wifi-coexistence/

Now for another test --> Ikea Styrbar remote for a single Ikea light: works fine!

With your blueprint I setup a third Ikea Styrbar (E2001 RVS, firmware 2.4.16) which is used with a single light (Zigbee Model TRADFRIbulbE27WSglobeopal1055lm, firmware 1.0.012). I filled in the three required parts: integration Zigbee2MQTT, Controller Device (styrbar) and the Helper - Last Controller Event.

The only optional setting is the "Up button short press": Light toggle on the device Ikea light bulb, just like I used to have in v1 and as expected.

This works nicely:

• up turns the light on
• down turn the light off
• left or right changes the kind of white
• long down/up decreases/increases the brightness

even when the buttons are used quickly after one another.

Not even a warning, let alone an error, in the Zigbee2MQTT logs. It just works like it used to work before v2!

What do you suggest to test next?

[quodo]

My problem with the Failed to send with status=BUSY errors and randomly unresponsive lights were solved by updating the Sonoff dongle firmware from version 7.4.5.0 to 8.0.2 (details).

Your blueprint now works as expected with my Ikea Styrbar! Thanks!

So now I have three Ikea Styrbars, two in use and a third to play with. How can I help testing your blueprints?

[yarafie]

Glad everything worked out. Was sure it was your dongle.

I have mirrored EPMatts Repo and switched most links to my own fork.
So even the website points to my repo so you can just click the links.

All blueprints and hooks have been updated and one new controller added IKEA RODRET.

Feel free to visit my fork

Code: https://github.com/yarafie/awesome-ha-blueprints
website: https://yarafie.github.io/awesome-ha-blueprints/

[EPMatt]

Update: IKEA E1743 Controller Blueprint Version 2025.01.23 is published, with Z2M 2.0.0 support! 🔥

@yarafie we can now open the PR to replicate changes to all other controllers.