Skip to content

Latest commit

 

History

History
2499 lines (1855 loc) · 107 KB

GettingStarted.md

File metadata and controls

2499 lines (1855 loc) · 107 KB

Datadog Ruby Trace Client

ddtrace is Datadog’s tracing client for Ruby. It is used to trace requests as they flow across web servers, databases and microservices so that developers have high visibility into bottlenecks and troublesome requests.

Getting started

For the general APM documentation, see our setup documentation.

For more information about what APM looks like once your application is sending information to Datadog, take a look at Visualizing your APM data.

To contribute, check out the contribution guidelines and development guide.

Table of Contents

Compatibility

Supported Ruby interpreters:

Type Documentation Version Support type Gem version support
MRI https://www.ruby-lang.org/ 3.0 Full Latest
2.7 Full Latest
2.6 Full Latest
2.5 Full Latest
2.4 Full Latest
2.3 Full Latest
2.2 Full Latest
2.1 Full Latest
2.0 Full Latest
1.9.3 EOL since August 6th, 2020 < 0.27.0
1.9.1 EOL since August 6th, 2020 < 0.27.0
JRuby https://www.jruby.org 9.2 Full Latest

Supported web servers:

Type Documentation Version Support type
Puma http://puma.io/ 2.16+ / 3.6+ Full
Unicorn https://bogomips.org/unicorn/ 4.8+ / 5.1+ Full
Passenger https://www.phusionpassenger.com/ 5.0+ Full

Supported tracing frameworks:

Type Documentation Version Gem version support
OpenTracing https://github.com/opentracing/opentracing-ruby 0.4.1+ (w/ Ruby 2.1+) >= 0.16.0

Full support indicates all tracer features are available.

Deprecated indicates support will transition to Maintenance in a future release.

Maintenance indicates only critical bugfixes are backported until EOL.

EOL indicates support is no longer provided.

Installation

The following steps will help you quickly start tracing your Ruby application.

Configure the Datadog Agent for APM

Before downloading tracing on your application, install the Datadog Agent. The Ruby APM tracer sends trace data through the Datadog Agent.

Install and configure the Datadog Agent to receive traces from your now instrumented application. By default the Datadog Agent is enabled in your datadog.yaml file under apm_enabled: true and listens for trace traffic at localhost:8126. For containerized environments, follow the steps below to enable trace collection within the Datadog Agent.

Containers

  1. Set apm_non_local_traffic: true in your main datadog.yaml configuration file.

  2. See the specific setup instructions for Docker, Kubernetes, Amazon ECS or Fargate to ensure that the Agent is configured to receive traces in a containerized environment:

  3. After having instrumented your application, the tracing client sends traces to localhost:8126 by default. If this is not the correct host and port change it by setting the env variables DD_AGENT_HOST and DD_TRACE_AGENT_PORT.

Quickstart for Rails applications

Automatic instrumentation

  1. Add the ddtrace gem to your Gemfile:

    source 'https://rubygems.org'
gem 'ddtrace', require: 'ddtrace/auto_instrument'

  2. Install the gem with bundle install

  3. You can configure, override, or disable any specific integration settings by also adding a Rails Manual Configuration file.

Manual instrumentation

  1. Add the ddtrace gem to your Gemfile:

    source 'https://rubygems.org'
gem 'ddtrace'

  2. Install the gem with bundle install

  3. Create a config/initializers/datadog.rb file containing:

    Datadog.configure do |c|
  # This will activate auto-instrumentation for Rails
  c.use :rails
end

    You can also activate additional integrations here (see Integration instrumentation)

Quickstart for Ruby applications

Automatic instrumentation

  1. Install the gem with gem install ddtrace

  2. Requiring any supported libraries or frameworks that should be instrumented.

  3. Add require 'ddtrace/auto_instrument' to your application. Note: This must be done after requiring any supported libraries or frameworks.

    # Example frameworks and libraries
require 'sinatra'
require 'faraday'
require 'redis'

require 'ddtrace/auto_instrument'

    You can configure, override, or disable any specific integration settings by also adding a Ruby Manual Configuration Block.

Manual instrumentation

  1. Install the gem with gem install ddtrace

  2. Add a configuration block to your Ruby application:

    require 'ddtrace'
Datadog.configure do |c|
  # Configure the tracer here.
  # Activate integrations, change tracer settings, etc...
  # By default without additional configuration, nothing will be traced.
end

  3. Add or activate instrumentation by doing either of the following:

Quickstart for OpenTracing

  1. Install the gem with gem install ddtrace

  2. To your OpenTracing configuration file, add the following:

    require 'opentracing'
require 'ddtrace'
require 'ddtrace/opentracer'

# Activate the Datadog tracer for OpenTracing
OpenTracing.global_tracer = Datadog::OpenTracer::Tracer.new

  3. (Optional) Add a configuration block to your Ruby application to configure Datadog with:

    Datadog.configure do |c|
  # Configure the Datadog tracer here.
  # Activate integrations, change tracer settings, etc...
  # By default without additional configuration,
  # no additional integrations will be traced, only
  # what you have instrumented with OpenTracing.
end

  4. (Optional) Add or activate additional instrumentation by doing either of the following:

Final steps for installation

After setting up, your services will appear on the APM services page within a few minutes. Learn more about using the APM UI.

Manual Instrumentation

If you aren't using a supported framework instrumentation, you may want to manually instrument your code.

To trace any Ruby code, you can use the Datadog.tracer.trace method:

Datadog.tracer.trace(name, options) do |span|
  # Wrap this block around the code you want to instrument
  # Additionally, you can modify the span here.
  # e.g. Change the resource name, set tags, etc...
end

Where name should be a String that describes the generic kind of operation being done (e.g. 'web.request', or 'request.parse')

And options is an optional Hash that accepts the following parameters:

Key Type Description Default
service String The service name which this span belongs (e.g. 'my-web-service') Tracer default-service, $PROGRAM_NAME or 'ruby'
resource String Name of the resource or action being operated on. Traces with the same resource value will be grouped together for the purpose of metrics (but still independently viewable.) Usually domain specific, such as a URL, query, request, etc. (e.g. 'Article#submit', http://example.com/articles/list.) name of Span.
span_type String The type of the span (such as 'http', 'db', etc.) nil
child_of Datadog::Span / Datadog::Context Parent for this span. If not provided, will automatically become current active span. nil
start_time Time When the span actually starts. Useful when tracing events that have already happened. Time.now
tags Hash Extra tags which should be added to the span. {}
on_error Proc Handler invoked when a block is provided to trace, and it raises an error. Provided span and error as arguments. Sets error on the span by default. `proc {

It's highly recommended you set both service and resource at a minimum. Spans without a service or resource as nil will be discarded by the Datadog agent.

Example of manual instrumentation in action:

get '/posts' do
  Datadog.tracer.trace('web.request', service: 'my-blog', resource: 'GET /posts') do |span|
    # Trace the activerecord call
    Datadog.tracer.trace('posts.fetch') do
      @posts = Posts.order(created_at: :desc).limit(10)
    end

    # Add some APM tags
    span.set_tag('http.method', request.request_method)
    span.set_tag('posts.count', @posts.length)

    # Trace the template rendering
    Datadog.tracer.trace('template.render') do
      erb :index
    end
  end
end

Asynchronous tracing

It might not always be possible to wrap Datadog.tracer.trace around a block of code. Some event or notification based instrumentation might only notify you when an event begins or ends.

To trace these operations, you can trace code asynchronously by calling Datadog.tracer.trace without a block:

# Some instrumentation framework calls this after an event finishes...
def db_query(start, finish, query)
  span = Datadog.tracer.trace('database.query')
  span.resource = query
  span.start_time = start
  span.finish(finish)
end

Calling Datadog.tracer.trace without a block will cause the function to return a Datadog::Span that is started, but not finished. You can then modify this span however you wish, then close it finish.

You must not leave any unfinished spans. If any spans are left open when the trace completes, the trace will be discarded. You can activate debug mode to check for warnings if you suspect this might be happening.

To avoid this scenario when handling start/finish events, you can use Datadog.tracer.active_span to get the current active span.

# e.g. ActiveSupport::Notifications calls this when an event starts
def start(name, id, payload)
  # Start a span
  Datadog.tracer.trace(name)
end

# e.g. ActiveSupport::Notifications calls this when an event finishes
def finish(name, id, payload)
  # Retrieve current active span (thread-safe)
  current_span = Datadog.tracer.active_span
  unless current_span.nil?
    current_span.resource = payload[:query]
    current_span.finish
  end
end

Enriching traces from nested methods

You can tag additional information to the current active span from any method. Note however that if the method is called and there is no span currently active active_span will be nil.

# e.g. adding tag to active span

current_span = Datadog.tracer.active_span
current_span.set_tag('my_tag', 'my_value') unless current_span.nil?

You can also get the root span of the current active trace using the active_root_span method. This method will return nil if there is no active trace.

# e.g. adding tag to active root span

current_root_span = Datadog.tracer.active_root_span
current_root_span.set_tag('my_tag', 'my_value') unless current_root_span.nil?

Integration instrumentation

Many popular libraries and frameworks are supported out-of-the-box, which can be auto-instrumented. Although they are not activated automatically, they can be easily activated and configured by using the Datadog.configure API:

Datadog.configure do |c|
  # Activates and configures an integration
  c.use :integration_name, options
end

options is a Hash of integration-specific configuration settings.

For a list of available integrations, and their configuration options, please refer to the following:

Name Key Versions Supported: MRI Versions Supported: JRuby How to configure Gem source
Action Cable action_cable >= 5.0 >= 5.0 Link Link
Action View action_view >= 3.0 >= 3.0 Link Link
Active Model Serializers active_model_serializers >= 0.9 >= 0.9 Link Link
Action Pack action_pack >= 3.0 >= 3.0 Link Link
Active Record active_record >= 3.0 >= 3.0 Link Link
Active Support active_support >= 3.0 >= 3.0 Link Link
AWS aws >= 2.0 >= 2.0 Link Link
Concurrent Ruby concurrent_ruby >= 0.9 >= 0.9 Link Link
Cucumber cucumber >= 3.0 >= 1.7.16 Link Link
Dalli dalli >= 2.0 >= 2.0 Link Link
DelayedJob delayed_job >= 4.1 >= 4.1 Link Link
Elasticsearch elasticsearch >= 1.0 >= 1.0 Link Link
Ethon ethon >= 0.11 >= 0.11 Link Link
Excon excon >= 0.50 >= 0.50 Link Link
Faraday faraday >= 0.14 >= 0.14 Link Link
Grape grape >= 1.0 >= 1.0 Link Link
GraphQL graphql >= 1.7.9 >= 1.7.9 Link Link
gRPC grpc >= 1.7 gem not available Link Link
http.rb httprb >= 2.0 >= 2.0 Link Link
httpclient httpclient >= 2.2 >= 2.2 Link Link
httpx httpx >= 0.11 >= 0.11 Link Link
Kafka ruby-kafka >= 0.7.10 >= 0.7.10 Link Link
MongoDB mongo >= 2.1 >= 2.1 Link Link
MySQL2 mysql2 >= 0.3.21 gem not available Link Link
Net/HTTP http (Any supported Ruby) (Any supported Ruby) Link Link
Presto presto >= 0.5.14 >= 0.5.14 Link Link
Qless qless >= 0.10.0 >= 0.10.0 Link Link
Que que >= 1.0.0.beta2 >= 1.0.0.beta2 Link Link
Racecar racecar >= 0.3.5 >= 0.3.5 Link Link
Rack rack >= 1.1 >= 1.1 Link Link
Rails rails >= 3.0 >= 3.0 Link Link
Rake rake >= 12.0 >= 12.0 Link Link
Redis redis >= 3.2 >= 3.2 Link Link
Resque resque >= 1.0 >= 1.0 Link Link
Rest Client rest-client >= 1.8 >= 1.8 Link Link
RSpec rspec. >= 3.0.0 >= 3.0.0 Link. Link
Sequel sequel >= 3.41 >= 3.41 Link Link
Shoryuken shoryuken >= 3.2 >= 3.2 Link Link
Sidekiq sidekiq >= 3.5.4 >= 3.5.4 Link Link
Sinatra sinatra >= 1.4 >= 1.4 Link Link
Sneakers sneakers >= 2.12.0 >= 2.12.0 Link Link
Sucker Punch sucker_punch >= 2.0 >= 2.0 Link Link

Action Cable

The Action Cable integration traces broadcast messages and channel actions.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :action_cable, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for action_cable instrumentation 'action_cable'

Action View

Most of the time, Active Support is set up as part of Rails, but it can be activated separately:

require 'actionview'
require 'ddtrace'

Datadog.configure do |c|
  c.use :action_view, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for rendering instrumentation. action_view
template_base_path Used when the template name is parsed. If you don't store your templates in the views/ folder, you may need to change this value 'views/'

Active Model Serializers

The Active Model Serializers integration traces the serialize event for version 0.9+ and the render event for version 0.10+.

require 'active_model_serializers'
require 'ddtrace'

Datadog.configure do |c|
  c.use :active_model_serializers, options
end

my_object = MyModel.new(name: 'my object')
ActiveModelSerializers::SerializableResource.new(test_obj).serializable_hash
Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for active_model_serializers instrumentation. 'active_model_serializers'

Action Pack

Most of the time, Action Pack is set up as part of Rails, but it can be activated separately:

require 'actionpack'
require 'ddtrace'

Datadog.configure do |c|
  c.use :action_pack, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for rendering instrumentation. action_pack

Active Record

Most of the time, Active Record is set up as part of a web framework (Rails, Sinatra...) however, it can be set up alone:

require 'tmpdir'
require 'sqlite3'
require 'active_record'
require 'ddtrace'

Datadog.configure do |c|
  c.use :active_record, options
end

Dir::Tmpname.create(['test', '.sqlite']) do |db|
  conn = ActiveRecord::Base.establish_connection(adapter: 'sqlite3',
                                                 database: db)
  conn.connection.execute('SELECT 42') # traced!
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to the global setting, false for off. false
orm_service_name Service name used for the mapping portion of query results to ActiveRecord objects. Inherits service name from parent by default. parent.service_name (e.g. 'mysql2')
service_name Service name used for database portion of active_record instrumentation. Name of database adapter (e.g. 'mysql2')

Configuring trace settings per database

You can configure trace settings per database connection by using the describes option:

# Provide a `:describes` option with a connection key.
# Any of the following keys are acceptable and equivalent to one another.
# If a block is provided, it yields a Settings object that
# accepts any of the configuration options listed above.

Datadog.configure do |c|
  # Symbol matching your database connection in config/database.yml
  # Only available if you are using Rails with ActiveRecord.
  c.use :active_record, describes: :secondary_database, service_name: 'secondary-db'
  
  # Block configuration pattern.
  c.use :active_record, describes: :secondary_database do |second_db|
    second_db.service_name = 'secondary-db'
  end

  # Connection string with the following connection settings:
  # adapter, username, host, port, database
  # Other fields are ignored.
  c.use :active_record, describes: 'mysql2://root@127.0.0.1:3306/mysql', service_name: 'secondary-db'

  # Hash with following connection settings:
  # adapter, username, host, port, database
  # Other fields are ignored.
  c.use :active_record, describes: {
      adapter:  'mysql2',
      host:     '127.0.0.1',
      port:     '3306',
      database: 'mysql',
      username: 'root'
    },
    service_name: 'secondary-db'
end

You can also create configurations based on partial matching of database connection fields:

Datadog.configure do |c|
  # Matches any connection on host `127.0.0.1`.
  c.use :active_record, describes: { host:  '127.0.0.1' }, service_name: 'local-db'

  # Matches any `mysql2` connection.
  c.use :active_record, describes: { adapter: 'mysql2'}, service_name: 'mysql-db'
  
  # Matches any `mysql2` connection to the `reports` database.
  #
  # In case of multiple matching `describe` configurations, the latest one applies.
  # In this case a connection with both adapter `mysql` and database `reports`
  # will be configured `service_name: 'reports-db'`, not `service_name: 'mysql-db'`.
  c.use :active_record, describes: { adapter: 'mysql2', database:  'reports'}, service_name: 'reports-db'
end

When multiple describes configurations match a connection, the latest configured rule that matches will be applied.

If ActiveRecord traces an event that uses a connection that matches a key defined by describes, it will use the trace settings assigned to that connection. If the connection does not match any of the described connections, it will use default settings defined by c.use :active_record instead.

Active Support

Most of the time, Active Support is set up as part of Rails, but it can be activated separately:

require 'activesupport'
require 'ddtrace'

Datadog.configure do |c|
  c.use :active_support, options
end

cache = ActiveSupport::Cache::MemoryStore.new
cache.read('city')

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
cache_service Service name used for caching with active_support instrumentation. active_support-cache

AWS

The AWS integration will trace every interaction (e.g. API calls) with AWS services (S3, ElastiCache etc.).

require 'aws-sdk'
require 'ddtrace'

Datadog.configure do |c|
  c.use :aws, options
end

# Perform traced call
Aws::S3::Client.new.list_buckets

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for aws instrumentation 'aws'

Concurrent Ruby

The Concurrent Ruby integration adds support for context propagation when using ::Concurrent::Future. Making sure that code traced within the Future#execute will have correct parent set.

To activate your integration, use the Datadog.configure method:

# Inside Rails initializer or equivalent
Datadog.configure do |c|
  # Patches ::Concurrent::Future to use ExecutorService that propagates context
  c.use :concurrent_ruby, options
end

# Pass context into code executed within Concurrent::Future
Datadog.tracer.trace('outer') do
  Concurrent::Future.execute { Datadog.tracer.trace('inner') { } }.wait
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
service_name Service name used for concurrent-ruby instrumentation 'concurrent-ruby'

Cucumber

Cucumber integration will trace all executions of scenarios and steps when using cucumber framework.

To activate your integration, use the Datadog.configure method:

require 'cucumber'
require 'ddtrace'

# Configure default Cucumber integration
Datadog.configure do |c|
  c.use :cucumber, options
end

# Example of how to attach tags from scenario to active span
Around do |scenario, block|
  active_span = Datadog.configuration[:cucumber][:tracer].active_span
  unless active_span.nil?
    scenario.tags.filter { |tag| tag.include? ':' }.each do |tag|
      active_span.set_tag(*tag.name.split(':', 2))
    end
  end
  block.call
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
enabled Defines whether Cucumber tests should be traced. Useful for temporarily disabling tracing. true or false true
service_name Service name used for cucumber instrumentation. 'cucumber'
operation_name Operation name used for cucumber instrumentation. Useful if you want rename automatic trace metrics e.g. trace.#{operation_name}.errors. 'cucumber.test'

Dalli

Dalli integration will trace all calls to your memcached server:

require 'dalli'
require 'ddtrace'

# Configure default Dalli tracing behavior
Datadog.configure do |c|
  c.use :dalli, options
end

# Configure Dalli tracing behavior for single client
client = Dalli::Client.new('localhost:11211', options)
client.set('abc', 123)

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for dalli instrumentation 'memcached'

DelayedJob

The DelayedJob integration uses lifecycle hooks to trace the job executions and enqueues.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :delayed_job, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for DelayedJob instrumentation 'delayed_job'
client_service_name Service name used for client-side DelayedJob instrumentation 'delayed_job-client'
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Elasticsearch

The Elasticsearch integration will trace any call to perform_request in the Client object:

require 'elasticsearch/transport'
require 'ddtrace'

Datadog.configure do |c|
  c.use :elasticsearch, options
end

# Perform a query to Elasticsearch
client = Elasticsearch::Client.new url: 'http://127.0.0.1:9200'
response = client.perform_request 'GET', '_cluster/health'

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
quantize Hash containing options for quantization. May include :show with an Array of keys to not quantize (or :all to skip quantization), or :exclude with Array of keys to exclude entirely. {}
service_name Service name used for elasticsearch instrumentation 'elasticsearch'

Ethon

The ethon integration will trace any HTTP request through Easy or Multi objects. Note that this integration also supports Typhoeus library which is based on Ethon.

require 'ddtrace'

Datadog.configure do |c|
  c.use :ethon, options

  # optionally, specify a different service name for hostnames matching a regex
  c.use :ethon, describes: /user-[^.]+\.example\.com/ do |ethon|
    ethon.service_name = 'user.example.com'
    ethon.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
service_name Service name for ethon instrumentation. 'ethon'
split_by_domain Uses the request domain as the service name when set to true. false

Excon

The excon integration is available through the ddtrace middleware:

require 'excon'
require 'ddtrace'

# Configure default Excon tracing behavior
Datadog.configure do |c|
  c.use :excon, options

  # optionally, specify a different service name for hostnames matching a regex
  c.use :excon, describes: /user-[^.]+\.example\.com/ do |excon|
    excon.service_name = 'user.example.com'
    excon.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

connection = Excon.new('https://example.com')
connection.get

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
error_handler A Proc that accepts a response parameter. If it evaluates to a truthy value, the trace span is marked as an error. By default only sets 5XX responses as errors. nil
service_name Service name for Excon instrumentation. When provided to middleware for a specific connection, it applies only to that connection object. 'excon'
split_by_domain Uses the request domain as the service name when set to true. false

Configuring connections to use different settings

If you use multiple connections with Excon, you can give each of them different settings by configuring their constructors with middleware:

# Wrap the Datadog tracing middleware around the default middleware stack
Excon.new(
  'http://example.com',
  middlewares: Datadog::Contrib::Excon::Middleware.with(options).around_default_stack
)

# Insert the middleware into a custom middleware stack.
# NOTE: Trace middleware must be inserted after ResponseParser!
Excon.new(
  'http://example.com',
  middlewares: [
    Excon::Middleware::ResponseParser,
    Datadog::Contrib::Excon::Middleware.with(options),
    Excon::Middleware::Idempotent
  ]
)

Where options is a Hash that contains any of the parameters listed in the table above.

Faraday

The faraday integration is available through the ddtrace middleware:

require 'faraday'
require 'ddtrace'

# Configure default Faraday tracing behavior
Datadog.configure do |c|
  c.use :faraday, options

  # optionally, specify a different service name for hostnames matching a regex
  c.use :faraday, describes: /user-[^.]+\.example\.com/ do |faraday|
    faraday.service_name = 'user.example.com'
    faraday.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

# In case you want to override the global configuration for a certain client instance
connection = Faraday.new('https://example.com') do |builder|
  builder.use(:ddtrace, options)
  builder.adapter Faraday.default_adapter
end

connection.get('/foo')

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
error_handler A Proc that accepts a response parameter. If it evaluates to a truthy value, the trace span is marked as an error. By default only sets 5XX responses as errors. nil
service_name Service name for Faraday instrumentation. When provided to middleware for a specific connection, it applies only to that connection object. 'faraday'
split_by_domain Uses the request domain as the service name when set to true. false

Grape

The Grape integration adds the instrumentation to Grape endpoints and filters. This integration can work side by side with other integrations like Rack and Rails.

To activate your integration, use the Datadog.configure method before defining your Grape application:

# api.rb
require 'grape'
require 'ddtrace'

Datadog.configure do |c|
  c.use :grape, options
end

# Then define your application
class RackTestingAPI < Grape::API
  desc 'main endpoint'
  get :success do
    'Hello world!'
  end
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. nil
enabled Defines whether Grape should be traced. Useful for temporarily disabling tracing. true or false true
service_name Service name used for grape instrumentation 'grape'
error_statuses Defines a status code or range of status codes which should be marked as errors. '404,405,500-599' or [404,405,'500-599'] nil

GraphQL

The GraphQL integration activates instrumentation for GraphQL queries.

To activate your integration, use the Datadog.configure method:

# Inside Rails initializer or equivalent
Datadog.configure do |c|
  c.use :graphql, schemas: [YourSchema], options
end

# Then run a GraphQL query
YourSchema.execute(query, variables: {}, context: {}, operation_name: nil)

The use :graphql method accepts the following parameters. Additional options can be substituted in for options:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. nil
service_name Service name used for graphql instrumentation 'ruby-graphql'
schemas Required. Array of GraphQL::Schema objects which to trace. Tracing will be added to all the schemas listed, using the options provided to this configuration. If you do not provide any, then tracing will not be activated. []

Manually configuring GraphQL schemas

If you prefer to individually configure the tracer settings for a schema (e.g. you have multiple schemas with different service names), in the schema definition, you can add the following using the GraphQL API:

# Class-based schema
class YourSchema < GraphQL::Schema
  use(
    GraphQL::Tracing::DataDogTracing,
    service: 'graphql'
  )
end
# .define-style schema
YourSchema = GraphQL::Schema.define do
  use(
    GraphQL::Tracing::DataDogTracing,
    service: 'graphql'
  )
end

Or you can modify an already defined schema:

# Class-based schema
YourSchema.use(
    GraphQL::Tracing::DataDogTracing,
    service: 'graphql'
)
# .define-style schema
YourSchema.define do
  use(
    GraphQL::Tracing::DataDogTracing,
    service: 'graphql'
  )
end

Do NOT use :graphql in Datadog.configure if you choose to configure manually, as to avoid double tracing. These two means of configuring GraphQL tracing are considered mutually exclusive.

gRPC

The grpc integration adds both client and server interceptors, which run as middleware before executing the service's remote procedure call. As gRPC applications are often distributed, the integration shares trace information between client and server.

To setup your integration, use the Datadog.configure method like so:

require 'grpc'
require 'ddtrace'

Datadog.configure do |c|
  c.use :grpc, options
end

# Server side
server = GRPC::RpcServer.new
server.add_http2_port('localhost:50051', :this_port_is_insecure)
server.handle(Demo)
server.run_till_terminated

# Client side
client = Demo.rpc_stub_class.new('localhost:50051', :this_channel_is_insecure)
client.my_endpoint(DemoMessage.new(contents: 'hello!'))

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for grpc instrumentation 'grpc'

Configuring clients to use different settings

In situations where you have multiple clients calling multiple distinct services, you may pass the Datadog interceptor directly, like so

configured_interceptor = Datadog::Contrib::GRPC::DatadogInterceptor::Client.new do |c|
  c.service_name = "Alternate"
end

alternate_client = Demo::Echo::Service.rpc_stub_class.new(
  'localhost:50052',
  :this_channel_is_insecure,
  :interceptors => [configured_interceptor]
)

The integration will ensure that the configured_interceptor establishes a unique tracing setup for that client instance.

http.rb

The http.rb integration will trace any HTTP call using the Http.rb gem.

require 'http'
require 'ddtrace'
Datadog.configure do |c|
  c.use :httprb, options
  # optionally, specify a different service name for hostnames matching a regex
  c.use :httprb, describes: /user-[^.]+\.example\.com/ do |httprb|
    httprb.service_name = 'user.example.com'
    httprb.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
service_name Service name for httprb instrumentation. 'httprb'
split_by_domain Uses the request domain as the service name when set to true. false

httpclient

The httpclient integration will trace any HTTP call using the httpclient gem.

require 'httpclient'
require 'ddtrace'
Datadog.configure do |c|
  c.use :httpclient, options
  # optionally, specify a different service name for hostnames matching a regex
  c.use :httpclient, describes: /user-[^.]+\.example\.com/ do |httpclient|
    httpclient.service_name = 'user.example.com'
    httpclient.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
service_name Service name for httpclient instrumentation. 'httpclient'
split_by_domain Uses the request domain as the service name when set to true. false

httpx

httpx maintains its own integration with ddtrace:

require "ddtrace"
require "httpx/adapters/datadog"

Datadog.configure do |c|
  c.use :httpx

  # optionally, specify a different service name for hostnames matching a regex
  c.use :httpx, describes: /user-[^.]+\.example\.com/ do |http|
    http.service_name = 'user.example.com'
    http.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

Kafka

The Kafka integration provides tracing of the ruby-kafka gem:

You can enable it through Datadog.configure:

require 'active_support/notifications' # required to enable 'ruby-kafka' instrumentation
require 'kafka'
require 'ddtrace'

Datadog.configure do |c|
  c.use :kafka, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for kafka instrumentation 'kafka'
tracer Datadog::Tracer used to perform instrumentation. Usually you don't need to set this. Datadog.tracer

MongoDB

The integration traces any Command that is sent from the MongoDB Ruby Driver to a MongoDB cluster. By extension, Object Document Mappers (ODM) such as Mongoid are automatically instrumented if they use the official Ruby driver. To activate the integration, simply:

require 'mongo'
require 'ddtrace'

Datadog.configure do |c|
  c.use :mongo, options
end

# Create a MongoDB client and use it as usual
client = Mongo::Client.new([ '127.0.0.1:27017' ], :database => 'artists')
collection = client[:people]
collection.insert_one({ name: 'Steve' })

# In case you want to override the global configuration for a certain client instance
Datadog.configure(client, options)

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
quantize Hash containing options for quantization. May include :show with an Array of keys to not quantize (or :all to skip quantization), or :exclude with Array of keys to exclude entirely. { show: [:collection, :database, :operation] }
service_name Service name used for mongo instrumentation 'mongodb'

MySQL2

The MySQL2 integration traces any SQL command sent through mysql2 gem.

require 'mysql2'
require 'ddtrace'

Datadog.configure do |c|
  c.use :mysql2, options
end

client = Mysql2::Client.new(:host => "localhost", :username => "root")
client.query("SELECT * FROM users WHERE group='x'")

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for mysql2 instrumentation 'mysql2'

Net/HTTP

The Net/HTTP integration will trace any HTTP call using the standard lib Net::HTTP module.

require 'net/http'
require 'ddtrace'

Datadog.configure do |c|
  c.use :http, options

  # optionally, specify a different service name for hostnames matching a regex
  c.use :http, describes: /user-[^.]+\.example\.com/ do |http|
    http.service_name = 'user.example.com'
    http.split_by_domain = false # Only necessary if split_by_domain is true by default
  end
end

Net::HTTP.start('127.0.0.1', 8080) do |http|
  request = Net::HTTP::Get.new '/index'
  response = http.request(request)
end

content = Net::HTTP.get(URI('http://127.0.0.1/index.html'))

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
service_name Service name used for http instrumentation 'net/http'
split_by_domain Uses the request domain as the service name when set to true. false

If you wish to configure each connection object individually, you may use the Datadog.configure as it follows:

client = Net::HTTP.new(host, port)
Datadog.configure(client, options)

Presto

The Presto integration traces any SQL command sent through presto-client gem.

require 'presto-client'
require 'ddtrace'

Datadog.configure do |c|
  c.use :presto, options
end

client = Presto::Client.new(
  server: "localhost:8880",
  ssl: {verify: false},
  catalog: "native",
  schema: "default",
  time_zone: "US/Pacific",
  language: "English",
  http_debug: true,
)

client.run("select * from system.nodes")

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for presto instrumentation 'presto'

Qless

The Qless integration uses lifecycle hooks to trace job executions.

To add tracing to a Qless job:

require 'ddtrace'

Datadog.configure do |c|
  c.use :qless, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to the global setting, false for off. false
service_name Service name used for qless instrumentation 'qless'
tag_job_data Enable tagging with job arguments. true for on, false for off. false
tag_job_tags Enable tagging with job tags. true for on, false for off. false

Que

The Que integration is a middleware which will trace job executions.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :que, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
enabled Defines whether Que should be traced. Useful for temporarily disabling tracing. true or false true
service_name Service name used for que instrumentation 'que'
tag_args Enable tagging of a job's args field. true for on, false for off. false
tag_data Enable tagging of a job's data field. true for on, false for off. false
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Racecar

The Racecar integration provides tracing for Racecar jobs.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :racecar, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for racecar instrumentation 'racecar'

Rack

The Rack integration provides a middleware that traces all requests before they reach the underlying framework or application. It responds to the Rack minimal interface, providing reasonable values that can be retrieved at the Rack level.

This integration is automatically activated with web frameworks like Rails. If you're using a plain Rack application, enable the integration it to your config.ru:

# config.ru example
require 'ddtrace'

Datadog.configure do |c|
  c.use :rack, options
end

use Datadog::Contrib::Rack::TraceMiddleware

app = proc do |env|
  [ 200, {'Content-Type' => 'text/plain'}, ['OK'] ]
end

run app

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. nil
application Your Rack application. Required for middleware_names. nil
distributed_tracing Enables distributed tracing so that this service trace is connected with a trace of another service if tracing headers are received true
headers Hash of HTTP request or response headers to add as tags to the rack.request. Accepts request and response keys with Array values e.g. ['Last-Modified']. Adds http.request.headers.* and http.response.headers.* tags respectively. { response: ['Content-Type', 'X-Request-ID'] }
middleware_names Enable this if you want to use the last executed middleware class as the resource name for the rack span. If enabled alongside the rails instrumention, rails takes precedence by setting the rack resource name to the active rails controller when applicable. Requires application option to use. false
quantize Hash containing options for quantization. May include :query or :fragment. {}
quantize.query Hash containing options for query portion of URL quantization. May include :show or :exclude. See options below. Option must be nested inside the quantize option. {}
quantize.query.show Defines which values should always be shown. Shows no values by default. May be an Array of strings, or :all to show all values. Option must be nested inside the query option. nil
quantize.query.exclude Defines which values should be removed entirely. Excludes nothing by default. May be an Array of strings, or :all to remove the query string entirely. Option must be nested inside the query option. nil
quantize.fragment Defines behavior for URL fragments. Removes fragments by default. May be :show to show URL fragments. Option must be nested inside the quantize option. nil
request_queuing Track HTTP request time spent in the queue of the frontend server. See HTTP request queuing for setup details. Set to true to enable. false
service_name Service name used for rack instrumentation 'rack'
web_service_name Service name for frontend server request queuing spans. (e.g. 'nginx') 'web-server'

Configuring URL quantization behavior

Datadog.configure do |c|
  # Default behavior: all values are quantized, fragment is removed.
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path?category_id&sort_by
  # http://example.com/path?categories[]=1&categories[]=2 --> http://example.com/path?categories[]

  # Show values for any query string parameter matching 'category_id' exactly
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path?category_id=1&sort_by
  c.use :rack, quantize: { query: { show: ['category_id'] } }

  # Show all values for all query string parameters
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path?category_id=1&sort_by=asc
  c.use :rack, quantize: { query: { show: :all } }

  # Totally exclude any query string parameter matching 'sort_by' exactly
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path?category_id
  c.use :rack, quantize: { query: { exclude: ['sort_by'] } }

  # Remove the query string entirely
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path
  c.use :rack, quantize: { query: { exclude: :all } }

  # Show URL fragments
  # http://example.com/path?category_id=1&sort_by=asc#featured --> http://example.com/path?category_id&sort_by#featured
  c.use :rack, quantize: { fragment: :show }
end

Rails

The Rails integration will trace requests, database calls, templates rendering, and cache read/write/delete operations. The integration makes use of the Active Support Instrumentation, listening to the Notification API so that any operation instrumented by the API is traced.

To enable the Rails instrumentation, create an initializer file in your config/initializers folder:

# config/initializers/datadog.rb
require 'ddtrace'

Datadog.configure do |c|
  c.use :rails, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to the global setting, false for off. nil
cache_service Cache service name used when tracing cache activity '<app_name>-cache'
controller_service Service name used when tracing a Rails action controller '<app_name>'
database_service Database service name used when tracing database activity '<app_name>-<adapter_name>'
distributed_tracing Enables distributed tracing so that this service trace is connected with a trace of another service if tracing headers are received true
exception_controller Class or Module which identifies a custom exception controller class. Tracer provides improved error behavior when it can identify custom exception controllers. By default, without this option, it 'guesses' what a custom exception controller looks like. Providing this option aids this identification. nil
middleware Add the trace middleware to the Rails application. Set to false if you don't want the middleware to load. true
middleware_names Enables any short-circuited middleware requests to display the middleware name as a resource for the trace. false
service_name Service name used when tracing application requests (on the rack level) '<app_name>' (inferred from your Rails application namespace)
template_base_path Used when the template name is parsed. If you don't store your templates in the views/ folder, you may need to change this value 'views/'
log_injection Automatically enables injection Trace Correlation information, such as dd.trace_id, into Rails logs. Supports the default logger (ActiveSupport::TaggedLogging) and Lograge. Details on the format of Trace Correlation information can be found in the Trace Correlation section. false

Supported versions

MRI Versions JRuby Versions Rails Versions
2.0 3.0 - 3.2
2.1 3.0 - 4.2
2.2 - 2.3 3.0 - 5.2
2.4 4.2.8 - 5.2
2.5 4.2.8 - 6.1
2.6 - 2.7 9.2 5.0 - 6.1
3.0 6.1

Rake

You can add instrumentation around your Rake tasks by activating the rake integration. Each task and its subsequent subtasks will be traced.

To activate Rake task tracing, add the following to your Rakefile:

# At the top of your Rakefile:
require 'rake'
require 'ddtrace'

Datadog.configure do |c|
  c.use :rake, options
end

task :my_task do
  # Do something task work here...
end

Rake::Task['my_task'].invoke

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to the global setting, false for off. false
enabled Defines whether Rake tasks should be traced. Useful for temporarily disabling tracing. true or false true
quantize Hash containing options for quantization of task arguments. See below for more details and examples. {}
service_name Service name used for rake instrumentation 'rake'

Configuring task quantization behavior

Datadog.configure do |c|
  # Given a task that accepts :one, :two, :three...
  # Invoked with 'foo', 'bar', 'baz'.

  # Default behavior: all arguments are quantized.
  # `rake.invoke.args` tag  --> ['?']
  # `rake.execute.args` tag --> { one: '?', two: '?', three: '?' }
  c.use :rake

  # Show values for any argument matching :two exactly
  # `rake.invoke.args` tag  --> ['?']
  # `rake.execute.args` tag --> { one: '?', two: 'bar', three: '?' }
  c.use :rake, quantize: { args: { show: [:two] } }

  # Show all values for all arguments.
  # `rake.invoke.args` tag  --> ['foo', 'bar', 'baz']
  # `rake.execute.args` tag --> { one: 'foo', two: 'bar', three: 'baz' }
  c.use :rake, quantize: { args: { show: :all } }

  # Totally exclude any argument matching :three exactly
  # `rake.invoke.args` tag  --> ['?']
  # `rake.execute.args` tag --> { one: '?', two: '?' }
  c.use :rake, quantize: { args: { exclude: [:three] } }

  # Remove the arguments entirely
  # `rake.invoke.args` tag  --> ['?']
  # `rake.execute.args` tag --> {}
  c.use :rake, quantize: { args: { exclude: :all } }
end

Redis

The Redis integration will trace simple calls as well as pipelines.

require 'redis'
require 'ddtrace'

Datadog.configure do |c|
  c.use :redis, options
end

# Perform Redis commands
redis = Redis.new
redis.set 'foo', 'bar'

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for redis instrumentation 'redis'
command_args Show the command arguments (e.g. key in GET key) as resource name and tag true

You can also set per-instance configuration as it follows:

require 'redis'
require 'ddtrace'

Datadog.configure do |c|
  c.use :redis # Enabling integration instrumentation is still required
end

customer_cache = Redis.new
invoice_cache = Redis.new

Datadog.configure(customer_cache, service_name: 'customer-cache')
Datadog.configure(invoice_cache, service_name: 'invoice-cache')

# Traced call will belong to `customer-cache` service
customer_cache.get(...)
# Traced call will belong to `invoice-cache` service
invoice_cache.get(...)

Configuring trace settings per connection

You can configure trace settings per connection by using the describes option:

# Provide a `:describes` option with a connection key.
# Any of the following keys are acceptable and equivalent to one another.
# If a block is provided, it yields a Settings object that
# accepts any of the configuration options listed above.

Datadog.configure do |c|
  # The default configuration for any redis client
  c.use :redis, service_name: 'redis-default'

  # The configuration matching a given unix socket.
  c.use :redis, describes: { url: 'unix://path/to/file' }, service_name: 'redis-unix'

  # For network connections, only these fields are considered during matching:
  # scheme, host, port, db
  # Other fields are ignored.
  
  # Network connection string
  c.use :redis, describes: 'redis://127.0.0.1:6379/0', service_name: 'redis-connection-string'
  c.use :redis, describes: { url: 'redis://127.0.0.1:6379/1' }, service_name: 'redis-connection-url'
  # Network client hash
  c.use :redis, describes: { host: 'my-host.com', port: 6379, db: 1, scheme: 'redis' }, service_name: 'redis-connection-hash'
  # Only a subset of the connection hash
  c.use :redis, describes: { host: ENV['APP_CACHE_HOST'], port: ENV['APP_CACHE_PORT'] }, service_name: 'redis-cache'
  c.use :redis, describes: { host: ENV['SIDEKIQ_CACHE_HOST'] }, service_name: 'redis-sidekiq'
end

When multiple describes configurations match a connection, the latest configured rule that matches will be applied.

Resque

The Resque integration uses Resque hooks that wraps the perform method.

To add tracing to a Resque job:

require 'ddtrace'

class MyJob
  def self.perform(*args)
    # do_something
  end
end

Datadog.configure do |c|
  c.use :resque, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to the global setting, false for off. false
service_name Service name used for resque instrumentation 'resque'
workers An array including all worker classes you want to trace (e.g. [MyJob]) []
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Rest Client

The rest-client integration is available through the ddtrace middleware:

require 'rest_client'
require 'ddtrace'

Datadog.configure do |c|
  c.use :rest_client, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
distributed_tracing Enables distributed tracing true
service_name Service name for rest_client instrumentation. 'rest_client'

RSpec

RSpec integration will trace all executions of example groups and examples when using rspec test framework.

To activate your integration, use the Datadog.configure method:

require 'rspec'
require 'ddtrace'

# Configure default RSpec integration
Datadog.configure do |c|
  c.use :rspec, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
enabled Defines whether RSpec tests should be traced. Useful for temporarily disabling tracing. true or false true
service_name Service name used for rspec instrumentation. 'rspec'
operation_name Operation name used for rspec instrumentation. Useful if you want rename automatic trace metrics e.g. trace.#{operation_name}.errors. 'rspec.example'

Sequel

The Sequel integration traces queries made to your database.

require 'sequel'
require 'ddtrace'

# Connect to database
database = Sequel.sqlite

# Create a table
database.create_table :articles do
  primary_key :id
  String :name
end

Datadog.configure do |c|
  c.use :sequel, options
end

# Perform a query
articles = database[:articles]
articles.all

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name for sequel instrumentation Name of database adapter (e.g. 'mysql2')

Only Ruby 2.0+ is supported.

Configuring databases to use different settings

If you use multiple databases with Sequel, you can give each of them different settings by configuring their respective Sequel::Database objects:

sqlite_database = Sequel.sqlite
postgres_database = Sequel.connect('postgres://user:password@host:port/database_name')

# Configure each database with different service names
Datadog.configure(sqlite_database, service_name: 'my-sqlite-db')
Datadog.configure(postgres_database, service_name: 'my-postgres-db')

Shoryuken

The Shoryuken integration is a server-side middleware which will trace job executions.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :shoryuken, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for shoryuken instrumentation 'shoryuken'
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Sidekiq

The Sidekiq integration is a client-side & server-side middleware which will trace job queuing and executions respectively.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :sidekiq, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
client_service_name Service name used for client-side sidekiq instrumentation 'sidekiq-client'
service_name Service name used for server-side sidekiq instrumentation 'sidekiq'
tag_args Enable tagging of job arguments. true for on, false for off. false
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Sinatra

The Sinatra integration traces requests and template rendering.

To start using the tracing client, make sure you import ddtrace and use :sinatra after either sinatra or sinatra/base, and before you define your application/routes:

Classic application

require 'sinatra'
require 'ddtrace'

Datadog.configure do |c|
  c.use :sinatra, options
end

get '/' do
  'Hello world!'
end

Modular application

require 'sinatra/base'
require 'ddtrace'

Datadog.configure do |c|
  c.use :sinatra, options
end

class NestedApp < Sinatra::Base
  register Datadog::Contrib::Sinatra::Tracer

  get '/nested' do
    'Hello from nested app!'
  end
end

class App < Sinatra::Base
  register Datadog::Contrib::Sinatra::Tracer

  use NestedApp

  get '/' do
    'Hello world!'
  end
end

Ensure you register Datadog::Contrib::Sinatra::Tracer as a middleware before you mount your nested applications.

Instrumentation options

options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. nil
distributed_tracing Enables distributed tracing so that this service trace is connected with a trace of another service if tracing headers are received true
headers Hash of HTTP request or response headers to add as tags to the sinatra.request. Accepts request and response keys with Array values e.g. ['Last-Modified']. Adds http.request.headers.* and http.response.headers.* tags respectively. { response: ['Content-Type', 'X-Request-ID'] }
resource_script_names Prepend resource names with script name false
service_name Service name used for sinatra instrumentation 'sinatra'

Sneakers

The Sneakers integration is a server-side middleware which will trace job executions.

You can enable it through Datadog.configure:

require 'ddtrace'

Datadog.configure do |c|
  c.use :sneakers, options
end

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
enabled Defines whether Sneakers should be traced. Useful for temporarily disabling tracing. true or false true
service_name Service name used for sneakers instrumentation 'sneakers'
tag_body Enable tagging of job message. true for on, false for off. false
error_handler Custom error handler invoked when a job raises an error. Provided span and error as arguments. Sets error on the span by default. Useful for ignoring transient errors. `proc {

Sucker Punch

The sucker_punch integration traces all scheduled jobs:

require 'ddtrace'

Datadog.configure do |c|
  c.use :sucker_punch, options
end

# Execution of this job is traced
LogJob.perform_async('login')

Where options is an optional Hash that accepts the following parameters:

Key Description Default
analytics_enabled Enable analytics for spans produced by this integration. true for on, nil to defer to global setting, false for off. false
service_name Service name used for sucker_punch instrumentation 'sucker_punch'

Advanced configuration

Tracer settings

To change the default behavior of the Datadog tracer, you can provide custom options inside the Datadog.configure block as in:

# config/initializers/datadog-tracer.rb

Datadog.configure do |c|
  c.tracer.enabled = true
  c.tracer.hostname = 'my-agent'
  c.tracer.port = 8126
  c.tracer.partial_flush.enabled = false
  c.tracer.sampler = Datadog::AllSampler.new

  # OR for advanced use cases, you can specify your own tracer:
  c.tracer.instance = Datadog::Tracer.new

  # To enable debug mode:
  c.diagnostics.debug = true
end

Available options are:

  • enabled: defines if the tracer is enabled or not. If set to false instrumentation will still run, but no spans are sent to the trace agent. Can be configured through the DD_TRACE_ENABLED environment variable. Defaults to true.
  • hostname: set the hostname of the trace agent.
  • instance: set to a custom Datadog::Tracer instance. If provided, other trace settings are ignored (you must configure it manually.)
  • partial_flush.enabled: set to true to enable partial trace flushing (for long running traces.) Disabled by default. Experimental.
  • port: set the port the trace agent is listening on.
  • sampler: set to a custom Datadog::Sampler instance. If provided, the tracer will use this sampler to determine sampling behavior.
  • diagnostics.startup_logs.enabled: Startup configuration and diagnostic log. Defaults to true. Can be configured through the DD_TRACE_STARTUP_LOGS environment variable.
  • diagnostics.debug: set to true to enable debug logging. Can be configured through the DD_TRACE_DEBUG environment variable. Defaults to false.
  • time_now_provider: when testing, it might be helpful to use a different time provider. For Timecop, for example, ->{ Time.now_without_mock_time } allows the tracer to use the real wall time. Span duration calculation will still use the system monotonic clock when available, thus not being affected by this setting. Defaults to ->{ Time.now }.

Custom logging

By default, all logs are processed by the default Ruby logger. When using Rails, you should see the messages in your application log file.

Datadog client log messages are marked with [ddtrace] so you should be able to isolate them from other messages.

Additionally, it is possible to override the default logger and replace it by a custom one. This is done using the log setting.

f = File.new("my-custom.log", "w+") # Log messages should go there
Datadog.configure do |c|
  c.logger = Logger.new(f) # Overriding the default logger
  c.logger.level = ::Logger::INFO
end

Datadog.logger.info { "this is typically called by tracing code" }

Environment and tags

By default, the trace agent (not this library, but the program running in the background collecting data from various clients) uses the tags set in the agent config file, see our environments tutorial for details.

You can configure the application to automatically tag your traces and metrics, using the following environment variables:

  • DD_ENV: Your application environment (e.g. production, staging, etc.)
  • DD_SERVICE: Your application's default service name (e.g. billing-api)
  • DD_VERSION: Your application version (e.g. 2.5, 202003181415, 1.3-alpha, etc.)
  • DD_TAGS: Custom tags in value pairs separated by , (e.g. layer:api,team:intake)
    • If DD_ENV, DD_SERVICE or DD_VERSION are set, it will override any respective env/service/version tag defined in DD_TAGS.
    • If DD_ENV, DD_SERVICE or DD_VERSION are NOT set, tags defined in DD_TAGS will be used to populate env/service/version respectively.

These values can also be overridden at the tracer level:

Datadog.configure do |c|
  c.service = 'billing-api'
  c.env = 'test'
  c.tags = { 'team' => 'qa' }
  c.version = '1.3-alpha'
end

This enables you to set this value on a per application basis, so you can have for example several applications reporting for different environments on the same host.

Tags can also be set directly on individual spans, which will supersede any conflicting tags defined at the application level.

Environment variables

Other Environment Variables:

  • DD_TRACE_AGENT_URL: Sets the URL endpoint where traces are sent. Has priority over DD_AGENT_HOST and DD_TRACE_AGENT_PORT if set. e.g. DD_TRACE_AGENT_URL=http://localhost:8126.
  • DD_TRACE_<INTEGRATION>_ENABLED: Enables or disables an activated integration. Defaults to true.. e.g. DD_TRACE_RAILS_ENABLED=false. This option has no effects on integrations that have not been explicitly activated (e.g. Datadog.configure{ |c| c.use :integration }).on code. This environment variable can only be used to disable an integration.
  • DD_TRACE_<INTEGRATION>_ANALYTICS_ENABLED: Enables or disable App Analytics for a specific integration. Valid values are: true or false (default). e.g. DD_TRACE_ACTION_CABLE_ANALYTICS_ENABLED=true.
  • DD_TRACE_<INTEGRATION>_ANALYTICS_SAMPLE_RATE: Sets the App Analytics sampling rate for a specific integration. A floating number between 0.0 and 1.0 (default). e.g. DD_TRACE_ACTION_CABLE_ANALYTICS_SAMPLE_RATE=0.5.
  • DD_LOGS_INJECTION: Automatically enables injection Trace Correlation information, such as dd.trace_id, into Rails logs. Supports the default logger (ActiveSupport::TaggedLogging) and Lograge. Details on the format of Trace Correlation information can be found in the Trace Correlation section. Valid values are: true or false(default). e.g. DD_LOGS_INJECTION=true.

Sampling

ddtrace can perform trace sampling. While the trace agent already samples traces to reduce bandwidth usage, client sampling reduces the performance overhead.

Datadog::RateSampler samples a ratio of the traces. For example:

# Sample rate is between 0 (nothing sampled) to 1 (everything sampled).
sampler = Datadog::RateSampler.new(0.5) # sample 50% of the traces

Datadog.configure do |c|
  c.tracer.sampler = sampler
end

Priority sampling

Priority sampling decides whether to keep a trace by using a priority attribute propagated for distributed traces. Its value indicates to the Agent and the backend about how important the trace is.

The sampler can set the priority to the following values:

  • Datadog::Ext::Priority::AUTO_REJECT: the sampler automatically decided to reject the trace.
  • Datadog::Ext::Priority::AUTO_KEEP: the sampler automatically decided to keep the trace.

Priority sampling is enabled by default. Enabling it ensures that your sampled distributed traces will be complete. Once enabled, the sampler will automatically assign a priority of 0 or 1 to traces, depending on their service and volume.

You can also set this priority manually to either drop a non-interesting trace or to keep an important one. For that, set the context#sampling_priority to:

  • Datadog::Ext::Priority::USER_REJECT: the user asked to reject the trace.
  • Datadog::Ext::Priority::USER_KEEP: the user asked to keep the trace.

When not using distributed tracing, you may change the priority at any time, as long as the trace incomplete. But it has to be done before any context propagation (fork, RPC calls) to be useful in a distributed context. Changing the priority after the context has been propagated causes different parts of a distributed trace to use different priorities. Some parts might be kept, some parts might be rejected, and this can cause the trace to be partially stored and remain incomplete.

If you change the priority, we recommend you do it as soon as possible - when the root span has just been created.

# First, grab the active span
span = Datadog.tracer.active_span

# Indicate to reject the trace
span.context.sampling_priority = Datadog::Ext::Priority::USER_REJECT

# Indicate to keep the trace
span.context.sampling_priority = Datadog::Ext::Priority::USER_KEEP

Distributed Tracing

Distributed tracing allows traces to be propagated across multiple instrumented applications so that a request can be presented as a single trace, rather than a separate trace per service.

To trace requests across application boundaries, the following must be propagated between each application:

Property Type Description
Trace ID Integer ID of the trace. This value should be the same across all requests that belong to the same trace.
Parent Span ID Integer ID of the span in the service originating the request. This value will always be different for each request within a trace.
Sampling Priority Integer Sampling priority level for the trace. This value should be the same across all requests that belong to the same trace.

Such propagation can be visualized as:

Service A:
  Trace ID:  100000000000000001
  Parent ID: 0
  Span ID:   100000000000000123
  Priority:  1

  |
  | Service B Request:
  |   Metadata:
  |     Trace ID:  100000000000000001
  |     Parent ID: 100000000000000123
  |     Priority:  1
  |
  V

Service B:
  Trace ID:  100000000000000001
  Parent ID: 100000000000000123
  Span ID:   100000000000000456
  Priority:  1

  |
  | Service C Request:
  |   Metadata:
  |     Trace ID:  100000000000000001
  |     Parent ID: 100000000000000456
  |     Priority:  1
  |
  V

Service C:
  Trace ID:  100000000000000001
  Parent ID: 100000000000000456
  Span ID:   100000000000000789
  Priority:  1

Via HTTP

For HTTP requests between instrumented applications, this trace metadata is propagated by use of HTTP Request headers:

Property Type HTTP Header name
Trace ID Integer x-datadog-trace-id
Parent Span ID Integer x-datadog-parent-id
Sampling Priority Integer x-datadog-sampling-priority

Such that:

Service A:
  Trace ID:  100000000000000001
  Parent ID: 0
  Span ID:   100000000000000123
  Priority:  1

  |
  | Service B HTTP Request:
  |   Headers:
  |     x-datadog-trace-id:          100000000000000001
  |     x-datadog-parent-id:         100000000000000123
  |     x-datadog-sampling-priority: 1
  |
  V

Service B:
  Trace ID:  100000000000000001
  Parent ID: 100000000000000123
  Span ID:   100000000000000456
  Priority:  1

  |
  | Service C HTTP Request:
  |   Headers:
  |     x-datadog-trace-id:          100000000000000001
  |     x-datadog-parent-id:         100000000000000456
  |     x-datadog-sampling-priority: 1
  |
  V

Service C:
  Trace ID:  100000000000000001
  Parent ID: 100000000000000456
  Span ID:   100000000000000789
  Priority:  1

Activating distributed tracing for integrations

Many integrations included in ddtrace support distributed tracing. Distributed tracing is enabled by default in Agent v7 and most versions of Agent v6. If needed, you can activate distributed tracing with configuration settings.

  • If your application receives requests from services with distributed tracing activated, you must activate distributed tracing on the integrations that handle these requests (e.g. Rails)
  • If your application send requests to services with distributed tracing activated, you must activate distributed tracing on the integrations that send these requests (e.g. Faraday)
  • If your application both sends and receives requests implementing distributed tracing, it must activate all integrations that handle these requests.

For more details on how to activate distributed tracing for integrations, see their documentation:

Using the HTTP propagator

To make the process of propagating this metadata easier, you can use the Datadog::HTTPPropagator module.

On the client:

Datadog.tracer.trace('web.call') do |span|
  # Inject span context into headers (`env` must be a Hash)
  Datadog::HTTPPropagator.inject!(span.context, env)
end

On the server:

Datadog.tracer.trace('web.work') do |span|
  # Build a context from headers (`env` must be a Hash)
  context = HTTPPropagator.extract(request.env)
  Datadog.tracer.provider.context = context if context.trace_id
end

HTTP request queuing

Traces that originate from HTTP requests can be configured to include the time spent in a frontend web server or load balancer queue before the request reaches the Ruby application.

This feature is disabled by default. To activate it, you must add an X-Request-Start or X-Queue-Start header from your web server (i.e., Nginx). The following is an Nginx configuration example:

# /etc/nginx/conf.d/ruby_service.conf
server {
    listen 8080;

    location / {
      proxy_set_header X-Request-Start "t=${msec}";
      proxy_pass http://web:3000;
    }
}

Then you must enable the request queuing feature, by setting request_queuing: true, in the integration handling the request. For Rack-based applications, see the documentation for details.

Processing Pipeline

Some applications might require that traces be altered or filtered out before they are sent upstream. The processing pipeline allows users to create processors to define such behavior.

Processors can be any object that responds to #call accepting trace as an argument (which is an Array of Datadog::Spans.)

For example:

lambda_processor = ->(trace) do
  # Processing logic...
  trace
end

class MyCustomProcessor
  def call(trace)
    # Processing logic...
    trace
  end
end
custom_processor = MyFancyProcessor.new

#call blocks of processors must return the trace object; this return value will be passed to the next processor in the pipeline.

These processors must then be added to the pipeline via Datadog::Pipeline.before_flush:

Datadog::Pipeline.before_flush(lambda_processor, custom_processor)

You can also define processors using the short-hand block syntax for Datadog::Pipeline.before_flush:

Datadog::Pipeline.before_flush do |trace|
  trace.delete_if { |span| span.name =~ /forbidden/ }
end

Filtering

You can use the Datadog::Pipeline::SpanFilter processor to remove spans, when the block evaluates as truthy:

Datadog::Pipeline.before_flush(
  # Remove spans that match a particular resource
  Datadog::Pipeline::SpanFilter.new { |span| span.resource =~ /PingController/ },
  # Remove spans that are trafficked to localhost
  Datadog::Pipeline::SpanFilter.new { |span| span.get_tag('host') == 'localhost' }
)

Processing

You can use the Datadog::Pipeline::SpanProcessor processor to modify spans:

Datadog::Pipeline.before_flush(
  # Strip matching text from the resource field
  Datadog::Pipeline::SpanProcessor.new { |span| span.resource.gsub!(/password=.*/, '') }
)

Trace correlation

In many cases, such as logging, it may be useful to correlate trace IDs to other events or data streams, for easier cross-referencing.

For logging in Rails applications

Automatic

For Rails applications using the default logger (ActiveSupport::TaggedLogging) or lograge, you can automatically enable trace correlation injection by setting the rails instrumentation configuration option log_injection to true or by setting environment variable DD_LOGS_INJECTION=true:

# config/initializers/datadog.rb
require 'ddtrace'

Datadog.configure do |c|
  c.use :rails, log_injection: true
end

Note: For lograge users who have also defined lograge.custom_options in an initializers/lograge.rb configuration file, due to the order that Rails loads initializers (alphabetical), automatic trace correlation may not take effect, since initializers/datadog.rb would be overwritten by the initializers/lograge.rb initializer. To support automatic trace correlation with existing lograge.custom_options, use the Manual (Lograge) configuration below.

Manual (Lograge)

After setting up Lograge in a Rails application, manually modify the custom_options block in your environment configuration file (e.g. config/environments/production.rb) to add the trace IDs.

config.lograge.custom_options = lambda do |event|
  # Retrieves trace information for current thread
  correlation = Datadog.tracer.active_correlation

  {
    # Adds IDs as tags to log output
    :dd => {
      # To preserve precision during JSON serialization, use strings for large numbers
      :trace_id => correlation.trace_id.to_s,
      :span_id => correlation.span_id.to_s,
      :env => correlation.env.to_s,
      :service => correlation.service.to_s,
      :version => correlation.version.to_s
    },
    :ddsource => ["ruby"],
    :params => event.payload[:params].reject { |k| %w(controller action).include? k }
  }
end
Manual (ActiveSupport::TaggedLogging)

Rails applications which are configured with the default ActiveSupport::TaggedLogging logger can append correlation IDs as tags to log output. To enable Trace Correlation with ActiveSupport::TaggedLogging, in your Rails environment configuration file, add the following:

Rails.application.configure do
  config.log_tags = [proc { Datadog.tracer.active_correlation.to_s }]
end

# Given:
# DD_ENV = 'production' (The name of the environment your application is running in.)
# DD_SERVICE = 'billing-api' (Default service name of your application.)
# DD_VERSION = '2.5.17' (The version of your application.)

# Web requests will produce:
# [dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=7110975754844687674 dd.span_id=7518426836986654206] Started GET "/articles" for 172.22.0.1 at 2019-01-16 18:50:57 +0000
# [dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=7110975754844687674 dd.span_id=7518426836986654206] Processing by ArticlesController#index as */*
# [dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=7110975754844687674 dd.span_id=7518426836986654206]   Article Load (0.5ms)  SELECT "articles".* FROM "articles"
# [dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=7110975754844687674 dd.span_id=7518426836986654206] Completed 200 OK in 7ms (Views: 5.5ms | ActiveRecord: 0.5ms)

For logging in Ruby applications

To add correlation IDs to your logger, add a log formatter which retrieves the correlation IDs with Datadog.tracer.active_correlation, then add them to the message.

To properly correlate with Datadog logging, be sure the following is present in the log message, in order as they appear:

  • dd.env=<ENV>: Where <ENV> is equal to Datadog.tracer.active_correlation.env. Omit if no environment is configured.
  • dd.service=<SERVICE>: Where <SERVICE> is equal to Datadog.tracer.active_correlation.service. Omit if no default service name is configured.
  • dd.version=<VERSION>: Where <VERSION> is equal to Datadog.tracer.active_correlation.version. Omit if no application version is configured.
  • dd.trace_id=<TRACE_ID>: Where <TRACE_ID> is equal to Datadog.tracer.active_correlation.trace_id or 0 if no trace is active during logging.
  • dd.span_id=<SPAN_ID>: Where <SPAN_ID> is equal to Datadog.tracer.active_correlation.span_id or 0 if no trace is active during logging.

By default, Datadog::Correlation::Identifier#to_s will return dd.env=<ENV> dd.service=<SERVICE> dd.version=<VERSION> dd.trace_id=<TRACE_ID> dd.span_id=<SPAN_ID>.

If a trace is not active and the application environment & version is not configured, it will return dd.trace_id=0 dd.span_id=0 dd.env= dd.version=.

An example of this in practice:

require 'ddtrace'
require 'logger'

ENV['DD_ENV'] = 'production'
ENV['DD_SERVICE'] = 'billing-api'
ENV['DD_VERSION'] = '2.5.17'

logger = Logger.new(STDOUT)
logger.progname = 'my_app'
logger.formatter  = proc do |severity, datetime, progname, msg|
  "[#{datetime}][#{progname}][#{severity}][#{Datadog.tracer.active_correlation}] #{msg}\n"
end

# When no trace is active
logger.warn('This is an untraced operation.')
# [2019-01-16 18:38:41 +0000][my_app][WARN][dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=0 dd.span_id=0] This is an untraced operation.

# When a trace is active
Datadog.tracer.trace('my.operation') { logger.warn('This is a traced operation.') }
# [2019-01-16 18:38:41 +0000][my_app][WARN][dd.env=production dd.service=billing-api dd.version=2.5.17 dd.trace_id=8545847825299552251 dd.span_id=3711755234730770098] This is a traced operation.

Configuring the transport layer

By default, the tracer submits trace data using Net::HTTP to 127.0.0.1:8126, the default location for the Datadog trace agent process. However, the tracer can be configured to send its trace data to alternative destinations, or by alternative protocols.

Some basic settings, such as hostname and port, can be configured using tracer settings.

Using the Net::HTTP adapter

The Net adapter submits traces using Net::HTTP over TCP. It is the default transport adapter.

Datadog.configure do |c|
  c.tracer.transport_options = proc { |t|
    # Hostname, port, and additional options. :timeout is in seconds.
    t.adapter :net_http, '127.0.0.1', 8126, { timeout: 1 }
  }
end

Using the Unix socket adapter

The UnixSocket adapter submits traces using Net::HTTP over Unix socket.

To use, first configure your trace agent to listen by Unix socket, then configure the tracer with:

Datadog.configure do |c|
  c.tracer.transport_options = proc { |t|
    # Provide filepath to trace agent Unix socket
    t.adapter :unix, '/tmp/ddagent/trace.sock'
  }
end

Using the transport test adapter

The Test adapter is a no-op transport that can optionally buffer requests. For use in test suites or other non-production environments.

Datadog.configure do |c|
  c.tracer.transport_options = proc { |t|
    # Set transport to no-op mode. Does not retain traces.
    t.adapter :test

    # Alternatively, you can provide a buffer to examine trace output.
    # The buffer must respond to '<<'.
    t.adapter :test, []
  }
end

Using a custom transport adapter

Custom adapters can be configured with:

Datadog.configure do |c|
  c.tracer.transport_options = proc { |t|
    # Initialize and pass an instance of the adapter
    custom_adapter = CustomAdapter.new
    t.adapter custom_adapter
  }
end

Metrics

The tracer and its integrations can produce some additional metrics that can provide useful insight into the performance of your application. These metrics are collected with dogstatsd-ruby, and can be sent to the same Datadog agent to which you send your traces.

To configure your application for metrics collection:

  1. Configure your Datadog agent for StatsD
  2. Add gem 'dogstatsd-ruby' to your Gemfile

For application runtime

If runtime metrics are configured, the trace library will automatically collect and send metrics about the health of your application.

To configure runtime metrics, add the following configuration:

# config/initializers/datadog.rb
require 'datadog/statsd'
require 'ddtrace'

Datadog.configure do |c|
  # To enable runtime metrics collection, set `true`. Defaults to `false`
  # You can also set DD_RUNTIME_METRICS_ENABLED=true to configure this.
  c.runtime_metrics.enabled = true

  # Optionally, you can configure the Statsd instance used for sending runtime metrics.
  # Statsd is automatically configured with default settings if `dogstatsd-ruby` is available.
  # You can configure with host and port of Datadog agent; defaults to 'localhost:8125'.
  c.runtime_metrics.statsd = Datadog::Statsd.new
end

See the Dogstatsd documentation for more details about configuring Datadog::Statsd.

The stats are VM specific and will include:

Name Type Description
runtime.ruby.class_count gauge Number of classes in memory space.
runtime.ruby.thread_count gauge Number of threads.
runtime.ruby.gc.*. gauge Garbage collection statistics: collected from GC.stat.

In addition, all metrics include the following tags:

Name Description
language Programming language traced. (e.g. ruby)
service List of services this associated with this metric.

OpenTracing

For setting up Datadog with OpenTracing, see out Quickstart for OpenTracing section for details.

Configuring Datadog tracer settings

The underlying Datadog tracer can be configured by passing options (which match Datadog::Tracer) when configuring the global tracer:

# Where `options` is a Hash of options provided to Datadog::Tracer
OpenTracing.global_tracer = Datadog::OpenTracer::Tracer.new(options)

It can also be configured by using Datadog.configure described in the Tracer settings section.

Activating and configuring integrations

By default, configuring OpenTracing with Datadog will not automatically activate any additional instrumentation provided by Datadog. You will only receive spans and traces from OpenTracing instrumentation you have in your application.

However, additional instrumentation provided by Datadog can be activated alongside OpenTracing using Datadog.configure, which can be used to enhance your tracing further. To activate this, see Integration instrumentation for more details.

Supported serialization formats

Type Supported? Additional information
OpenTracing::FORMAT_TEXT_MAP Yes
OpenTracing::FORMAT_RACK Yes Because of the loss of resolution in the Rack format, please note that baggage items with names containing either upper case characters or - will be converted to lower case and _ in a round-trip respectively. We recommend avoiding these characters or accommodating accordingly on the receiving end.
OpenTracing::FORMAT_BINARY No