diff --git a/examples/simple-router-info/README.md b/examples/simple-router-info/README.md
new file mode 100644
index 0000000..de382e8
--- /dev/null
+++ b/examples/simple-router-info/README.md
@@ -0,0 +1,3 @@
+# Basic router information
+
+This example demonstrated how to use this library to receive basic router information (model, software version, etc). Good to quickly test the library.
diff --git a/examples/simple-router-info/simple-router-info.ino b/examples/simple-router-info/simple-router-info.ino
new file mode 100644
index 0000000..8e33a45
--- /dev/null
+++ b/examples/simple-router-info/simple-router-info.ino
@@ -0,0 +1,123 @@
+/**
+ * simple-router-info.ino
+ *  René Vollmer
+ *  Example code for the home-indicator-project [ https://www.instructables.com/id/Who-Is-Home-Indicator-aka-Weasley-Clock-Based-on-T ].
+ *  
+ * Please adjust your data below.
+ *  
+ * Created on: 10.03.2020
+ *
+ */
+
+ 
+#if defined(ESP8266)
+    //Imports for ESP8266
+    #include <ESP8266WiFi.h>
+    #include <ESP8266WiFiMulti.h>
+    #include <ESP8266HTTPClient.h>
+    ESP8266WiFiMulti WiFiMulti;
+#elif defined(ESP32)
+    //Imports for ESP32
+    #include <WiFi.h>
+    #include <WiFiMulti.h>
+    #include <HTTPClient.h>
+    WiFiMulti WiFiMulti;
+#endif
+
+#include <tr064.h>
+
+//-------------------------------------------------------------------------------------
+// Put your router settings here
+//-------------------------------------------------------------------------------------
+
+// Wifi network name (SSID)
+const char *wifi_ssid = "WLANSID"; 
+
+// Wifi network password
+const char *wifi_password = "XXXXXXXXXXXXXXXXXXXXX";
+
+// The username if you created an account, "admin" otherwise
+const char *fuser = "homechecker";
+
+// The password for the aforementioned account.
+const char *fpass = "this_shouldBEaDecentPassword!";
+
+// IP address of your router. This should be "192.168.179.1" for most FRITZ!Boxes
+const char *IP = "192.168.179.1";
+
+// Port of the API of your router. This should be 49000 for all TR-064 devices.
+const int PORT = 49000;
+
+//-------------------------------------------------------------------------------------
+
+// TR-064 connection
+TR064 connection(PORT, IP, fuser, fpass);
+
+//###########################################################################################
+//############################ OKAY, LET'S DO THIS! #########################################
+//###########################################################################################
+
+void setup() {
+    // You might want to change the baud-rate
+    Serial.begin(115200);
+    if(Serial) Serial.setDebugOutput(true);
+
+    // Clear some space in the serial monitor.
+    if(Serial) {
+        Serial.println();
+        Serial.println();
+        Serial.println();
+    }
+
+    // **************************************************
+    // Wait a few secs for warm-up (dunno why, was in the default code for http connections).
+    // You might be able to remove this block
+    for (uint8_t t = 4; t > 0; t--) {
+        if(Serial) Serial.printf("[SETUP] WAIT %d...\n", t);
+        delay(1000);
+        if(Serial) Serial.flush();
+    }
+    // **************************************************
+
+
+    // Connect to wifi
+    ensureWIFIConnection();
+
+    // Initialize the TR-064 library
+    // (IMPORTANT!)
+    if(Serial) Serial.printf("Initialize TR-064 connection\n\n");
+    // Available debug levels are:
+    //  DEBUG_NONE, DEBUG_ERROR, DEBUG_WARNING, DEBUG_INFO, DEBUG_VERBOSE
+    connection.debug_level = DEBUG_VERBOSE;
+    connection.init();
+}
+
+void loop() {
+    ensureWIFIConnection();
+    
+    if(Serial) Serial.println("-------------------------------------------");
+
+    String params[][2] = {{}};
+    String req[][2] = {{"NewModelName", ""}, {"NewSoftwareVersion", ""}, {"NewUpTime", ""}};
+    connection.action("urn:dslforum-org:service:DeviceInfo:1", "GetInfo", params, 0, req, 3);
+
+    if(Serial) Serial.println("[main] Info retrieved.");
+    if(Serial) Serial.println("[main] Router Model: " + req[0][1]);
+    if(Serial) Serial.println("[main] Router software version: " + req[1][1]);
+    if(Serial) Serial.println("[main] Router up time: " + req[2][1] + "s");
+    
+    delay(5000);
+}
+
+/**
+ * Makes sure there is a WIFI connection and waits until it is (re-)established.
+ */
+void ensureWIFIConnection() {
+    if ((WiFiMulti.run() != WL_CONNECTED)) {
+        WiFiMulti.addAP(wifi_ssid, wifi_password);
+        WiFiMulti.run();
+        while ((WiFiMulti.run() != WL_CONNECTED)) {
+            delay(500);
+        }
+    }
+}
\ No newline at end of file